I am trying to ge my vm player to run. I have installed the program. Next, I go to shortcut location. upon startup of vm player it gives me this error:
Before you can run Vmware Player, several modules must be compiled and loaded into the running kernal.
Kernel Headers 2.6.35-22-generic
Kernel headers for version 2.6.35-22-generic were not found. If you installed them in a non-=default path you can specify the path below. Otherwise refer to your distribution's documentation for installation instructions and click Refresh to search again in default locations.
Location: blank box Browse Refresh
Cancel Install
I have tried everything that I have found, but nothing works.
I had installed Karmik Koala on VMware� Player 3.0.1 build-227600 and it ran perfectly well for four months. Today I upgraded to Lucid Lynx (lts) from within the VMware Player. The virtual machine restarted after the installation, now I can't direct my keyboard input to log in to my Ubuntu account. The mouse works but not the keyboard. How do I resolve this mess?
When I try to install vmware-player it complains that it can't find the kernel headers for my running kernel (2.6.31-20-generic) to compile its modules. I did have this working on 9.10. No amount of googling revealed the name of the package I need to get this working in Lucid.
I installed VMWare Player 3.1 on Ubuntu 10.04 64 bit and had the program show up in the applications menu. I opened and ran a prebuilt virtual machine without any problem. After shutting down the system, the next morning Player is gone, if I try to reinstall it shows that it is already installed, and if I try to open the virtual hard drive, it says that no applications is associated with that file type. There is no Player in the list of applications.
I have installed Ubuntu 10.04 LTS x64 in VMWare Player on my Windows 7 x64. My host video card is an ATi Mobility Radeon HD 5730 with 1 GB DDR3 and I am very sure that my other specs are above par for desktop effects (i7-820QM, 8 GB DDR3 RAM). However, even though I enabled 3D acceleration for the Ubuntu virtual machine (along with 4 cores and 1 GB RAM), I can't enable desktop effects. I have successfully installed VMWare Tools. I used to use VirtualBox and with x86 Ubuntu desktop effects work.
I installed VMware Player on my Ubuntu 10.10 machine, which uses Macbuntu skin. Loaded Vista on VMware Player so I could sync my ipod... works great. One problem I want to use VMware Player's unity mode but there is no menu to select it. From all of the screen shots I have seen on the web there is suppose to be a menu bar selection at the top next to the ubuntu (apple in my case) symbol to select unity mode through... but it is no where to be found. Here is a screen shot with VMware loaded with Vista, VMware is the active window:
I recently installed VMware Player on my ASUS Eee PC 1015 which is running Ubuntu 10.04 LTS. My goal is to run BT4 as a guest OS, but when I boot it from both the .iso and the .vmx I lose my mouse. After a quick Google serach I tried installing VMware Tools - no luck. I also tried using a USB mouse.
I want to run ubuntu and centOS on vmware player.I have ubuntu9.10 already installed on my system.which version of vmware player should i install to make it work.
Since installing Fedora 14, I have found that everytime I run Vmware player it goes through the compile sequence. It works fine after that. It should only compile if the kernel has changed. Anyone else with this problem? Any ideas what is wrong?
I'm running OpenSUSE 11.4 x86 with KDE 4.6 and kernel version 2.6.37.6-0.5. I'm not advanced linux user, though I'm trying to use it occasionally for getting more experience. Now I want to check which of the virtualization software suits me better, I've already tried VirtualBox and now I want to try VMware. I know that it has a lot of products, but for just home use I guess that I need only player. So, when I try to find it through my default repositories, I just was able to find this vmware-guest-kmp-default . I don't know what is it, so I tried to search through the OpenSUSE Build Service, but there's also no player package. I've already downloaded the source from the official site and yes, I do know how to built binaries from the source, but I know also, that after installing in a such way, it would be difficult for the package manager to track the software, as it's not rpm. So I want to ask you first, if you know any other way, to get the RPM package of the VMware Player from any suse repository.
My computer has 512 mb ram..i am using xp..i want to install ubuntu 10.04 within this xp(without dual booting).I heard about virtual machine such as virtual box or vmware player that help us to do the same..so i want to ask which one will be good practice vmware or virtualbox..remember i have only 512 mb ram...
I have also doubt regarding these quereis.. 1) can i install software of my choice in ubuntu after installation. 2) can i access internet by ubuntu 3) if i keep some data in ubuntu...will it be kept there also after machine shut down.
Actually i did dual booting xp and ubuntu..i succeed but sometimes my computer get stucked due to low memory..
it?I have Ubuntu 10.10 (and Ubuntu Server) on a factory Dell Inspiron 530. It's running an Intel Pentium Duo Core CPU (1.6GHz), has 1GB RAM, and VMware Player installed. When I boot XP SP3, it runs, but randomly crashes. I managed to update IE6 to IE8 without crashing, but when I tried to download MS Office 2010 Professional (Trial), it crashed near the end of the download. I got a blue screen with the following:
It then begins a physical dump of memory, completes, then automatically reboots XP in the virtual machine.
Every time it does this, it shows different memory addresses.
BTW, I also watched performance while doing this. As soon as CPU hit 100%, the download crashed, and soon after, XP crashed, sometimes locking up the physical machine.
I tried to get vmware player 7.6 to work after upgrading from Wheezy to Jessie. I downloaded kernal headers 3.16.0-4-amd 64 as the dialog box said to do. After doing that and attempting to install I got this message “C header files matching your running kernel were not found. Refer to your distribution's documentation for installation instructions.” At this point I wondered if it would be better to try a more recent version of Vmware player. So I downloaded Vmware Player 12.01. I could not get it to open.
I have a Linux guest OS in VMware player installed on my Linux host OS. I'm using the guest OS as a server that my host OS workstation will connect to for certain things. However, I want to run VMware player (and the guest OS it runs) headless - i.e. without its interface opening up. This is because I any commands I need to send to the server I do so using my host OS terminal, with commands such as ssh. I tried running 'vmplayer /path/to/guest-os.vmx', but that just triggers opening up the VMware player interface, which isn't what I want.
How could I make this work? Is there either a VMware-specific way, or maybe a Linux-specific way involving suppressing the interface or doing some other Linux magic related to GNOME or X or something? I've read somewhere this might be possible using VMware Server - is that true? In that case, is it actually not possible to do it in VMware Player? I hope it is possible because I really like the performance and simplicity of VMware Player and would prefer not to move to VMware Server.
I am using ubuntu 9.10 and the vmware player 3 was working fine. But after the kernel headers updated to 2.6.31-22 the vmware player shows the pop up and says it cannot find the kernel headers. But actually, the linux-headers-2.6.31-22-generic are installed. I tried to re-install the vmware player but with no sucess. Is there any way to correct this error.
I've just upgraded to Ubuntu 10.010 - Maverick Meerkat.
Launching VMWare Player 3.1.2 I get the message: "Before you can run VMWare, several modules must be compiled and loaded into running kernel". I click ok, but there are problems recompiling VMCI sockets. The effect is that my windows image starts, but then crashes.
Do you have some suggestions to solve the problem ? Or is it only a problem of compilation with the new 10.10 kernel, not yet available for VMWare?
I don't know if anyone else sees this, but I get some odd behaviour when using VMware Player sometimes (Ubuntu 10.10, VMware Player 3.1.2 build-301548, dual monitors).My screen locks after 5 minutes of inactivity. I run a Windows XP VM under VMware player occasionally for certain things and that has a screen-lock time of 15 minutes or so. When running the Windows VM in full-screen on one of my two monitors (not tried it on a lower res), if I place the mouse cursor on the XP VM screen and leave it for > 5 minutes, the screen does not appear to lock. I can come back to the machine and still interact with the Windows XP machine and do what I like. If I move the mouse cursor outside the bounds of the XP VM screen, then the whole screen goes black and presents me with the password prompt to unlock the machine
I keep installing Debian Workstation Player on Debian, but it just doesn't open. I think it might have something to do with the VMware kernel modules not being built or something. How can I start troubleshooting this? Also, why isn't VMware packaged? Has no one tried packaging it yet, or is there a more complex reason?
Code: #./VMware-Player-3.1.2-301548.i386.bundle It got installed successfully, but while running it said gcc not found. so i installed gcc by Code: #yum install gcc
As this seems to be an issue with a hardware driver I am posting it under hardware.
Dell Studio XPS 8000 desktop i7-860 CPU 8 GB RAM swap area set to 9 GB nVIdia GeForce GT220 1 GB Samsung SymcMaster 932 and Acer X223w displays Ubuntu 10.04 64 bit, all patches, nVidia-current 195.36.15 VMWare Player (64 bit) 3.1.0 build-261024
The whole nVidia thing has been busting my buttons since I installed 10.04 (actually 9.10 was in some ways worse). Occasional "low graphics mode" at boot and the fact that nvidia-settings makes inexplicable changes to the xorg.conf even when I make no changes to the configuration as shown in the program. After a number of uninstall, reinstall drills and a few kicks in the slats the machine is working reasonably well except as noted above.
However, I have noticed that I often cannot load the nvidia-settings program. If I launch it from the menu, nothing seems to happen. In a terminal I get
Quote:
After doing some research on "Segmentation fault" I find that most of the issues refer to the xorg.conf file. The posts I have seen are also quite old. So I did a little testing.
Immediately after booting the PC I can run nvidia-settings with no problem - from the menu or in a terminal. I can run it repeatedly.
BUT - after I launch a virtual machine in VMWare Player (it does not seem to matter what the guest OS is) I can no longer run nvidia-settings. I get the error as I quoted above. If nvidia-settings is already running when the VM is launched, nvidia-settings continues to function until I exit the program. I can then no longer start nvidia-settings.
The problem only occurs after the VM is launched, not simply by running VMWare Player. Shutting down the VM does not fix the problem. Only a reboot will do the trick.
I've been working on this problem for two nights, googled a lot, but still no luck. I'm working on Fedora 14, here's my kernel version
Code: [root@terran /]# uname -r 2.6.35.12-88.fc14.x86_64 and I've booted from this kernel, I've installed the same kernel-headers: Code: [root@terran /]# yum install kernel-headers
When ever I am trying to install Fedora12x86_64 in VMware Player 3.1.0 I am having a strange error. Please see the attachment and reply. I am running Fedora12x86_64 in my laptop and VMplayer 3.1.0 is installed in it.
The other day I installed VMware Player on the system when the Kernel was 2.6.38.8-32.fc15.x86_64. On running VMware player after installing the kernel-headers and gcc files the program ran fine (I did not try to install the VMware Tools). I also have not loaded the guess OS as yet.
toady I did and update in which the kernel was updated. I checked to ensure the Kernel-headers were also updated for the latest kernel.
After rebooting the machine the running kernel was then 2.6.40-4.fc15.x86_64. I then tried to start VMware Player. It indicated because the kernel was changed it needed to install new kernel modules, OK, It open the module screen and then crashed.
The log says it can not compile Vmmon which is the first module. it does not go any further.
Tried to installed a new copy of VMware Player over the old one but this only resulted in the same error messages.
I am using vmware player 3.1.3 and mounted in it an .iso of OpenSuse 11.3. Everything works fine, except the internet connection. For example, when I try to go to a website with firefox the page never displays. What do I have to do, so that the internet works?
I set my Network Adapter to the NAT setting, and ran an ifconfig for my machine. All the I got back was eth0 and lo. eth0 has the static IP configured I configured back in the days where I was running my VM Bridged with DHCP. Do I need to reconfigure my eth0 settings now and if so how?
I'm trying to test out Natty to see if I want to run with Unity. I'm not interested in wiping my production machine just to play with it. So this will be a VM install only for now.
So far, not a single alpha or beta nor even the final allows me to run unity. My hardware is perfectly capable (allegedly) of running Unity. The machine is only 6 months old.
I tried the Unity test script in Natty, and it tells me "no" but it also is telling me the wrong video card info. (apparently it is reading virtual hardware, not the real thing)
So how do I get VMWare Player to report or use my actual hardware, or for Natty to "see" the real card? Is this possible? If not, how in the world does ANYONE test Unity without actually installing it on a gamble? (note, a liveCD won't work because with an nVidia card, I have to install proprietary drivers which require a restart - Chicken, meet Egg.)
