Added the repo and installed Virtualbox.
Added user as vboxusers group
Added the following packages according to the error log
- make gcc kernel-source dkms
Finally /etc/init.d/vboxdrv setup reports an error
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel
[Code].....
how to install linux redhat and oracle 11g in sun virtualbox?. That thing is giving me a lot of headache.
View 2 Replies View RelatedI tried to install VirtualBox by using the "Help->Check For Updates" in VirtualBox and then downloading the rpm. When it finished, it popped up a huge error window that was too tall for the screen (and I couldn't copy the text). It wouldn't install. It said something about how the files in virtualBox 3.2.6 conflicted with those in 3.0.12.
How do I upgrade to the new version?
I tried installed Virtualbox but when I click on the icon "Oracle VM Virtualbox" it acts like its loading then the window in the task bar disappears and nothing happens, there were no errors on the install mind you.
View 9 Replies View Relatedhere's my setup: 32 bit Ubuntu 10.10 with an AMD 2.7GHz processor, and 2GB of RAM.I get Oracle 11G R2 installed, except two things fail near the end of the installation (I think they're both Oracle Net services or something. I broke a cardinal rule by not writing them down. ) I try to use sqlplus through Terminal, but the system can't find sqlplus. I'm assuming it isn't installed. I'm unable to connect to it through JDeveloper.
View 2 Replies View RelatedI'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedIs there a way to get Oracle virtualbox on Jessie yet? I only see one for wheezy at the oracle site.
View 3 Replies View RelatedI was notified by the updater that VirtualBox-3.2-3.2.10_66523_fedora12-1 (x86_64) was available to install. So I clicked [Install Update] and got the following Transaction error:The GPG keys listed for the "Fedora 12 - x86_64 - VirtualBox" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.
View 2 Replies View RelatedIm trying to run Arch Linux off Oracle vm virtualbox and everything going fine until It wants to wipe my entire hard drive. To be fully honest im afraid to touch it. I feel like it might bite my finger off if I poke at it in my usual way (first time ever using VM) so I was wondering if anyone has any tips or advice for me. Maybe someone elce has tryed this before and can tell me my computer wont explode when I partition. (I know it wont but I only have 1 computer and afraid to ruin it with my "experiments" cant afford a new one) I think because its VM it will only partition the space I set for it when I started the VM box. Just looking to be safe before I try it
View 4 Replies View RelatedI was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I'm trying to install Oracle DB on my Open Suse (uname says: Linux-llwu 2.6.34.7-0.3-desktop preempt 2010-09-20 .. 86_65 x86_64 x86_64 gnu/linux) but it fails when it need to check package requirements.. for example, installation says that libaio-0.3.105 is missing, but I installed it (0.3.105-2), and could upgrade it to 0.3.107-4.1 how should I fix this problem?
View 9 Replies View RelatedHowever, I do not consider myself a Linux pro - I hardly ever use the command line etc.
I have been using the Free personal version of VirtualBox for about 3 or 4 years and have had no problems in any version of OpenSuse (at least none that were not easily fixed). I upgraded to OpenSuse 11.4 several weeks ago and cannot get Virtualbox to work. I have tried installing from the opensuse 11.4 package on the VBox site and I have run their generic command line installer and either way I am unable to open my VMs.
When I used their generic installer I got the following errors:
linux-evl8:/home/frank/Downloads/VBox # ./VirtualBox-4.0.8-71778-Linux_amd64.run
Verifying archive integrity... All good.
Uncompressing VirtualBox for Linux installation...........
VirtualBox Version 4.0.8 r71778 (2011-05-16T17:05:29Z) installer
[Code]....
I did a reinstall of OpenSuse for several reasons and it is working great in everyway except I am still having this issue and at this point I am lost as to what to do next.
Just grabbed Slackware64-current and installed on my laptop. Also put Alien Bob's multilib on.need it for my Absoft fortran compiler.The problem I'm having is that VirtualBox-3.1.6 doesn't install. I've looked at other problems on the list related to this and I don't think that any of the ones that I've seen applies to my situation. My feeling is that there is an incompatibility problem with gcc. The stock kernel was compiled with gcc-4.4.3 which comes with Slackware64-current. However, Bob's multilib backdates this to gcc-4.3.3. So, when the Virtualbox installation procedure runs it sees a kernel compiled with a version of gcc that is different from the one that is currently installed and chokes. recompile the kernel with the current gcc. Haven't done a kernel compile in a long time though and I'd like to get it right. So, my question is "Is the stock .config file in the linux source folder the one used to configure the default kernel?". I like the stock kernel and would like to recompile with all the bells 'n whistles in the stock kernel.
View 14 Replies View RelatedI'm trying to install oracle (11g R2) on my OpenSuse (11.3), but when I do startup nomount, I got an error:
ORA-00854: MEMORY_TARGET not supported on this system
On web, I found that I need to increase tmpfs because of my memory_target oracle init parameter. I do it with:
mount -t tmpfs shmfs -o size=3G /dev/shm
(previous value to tmpfs (df -h) is 2G).
After that 'startup nomount' runs well, but after reboot, values are the same. So, how to 'save' this new value?
I just installed Fedora 12 VM using Virtualbox. The next thing I want to do is install the guest addons.So I mount the drive and go the the folder and I use the command:
Quote:
su (my username) VBoxLinuxAdditions-x86.run After that I give my password. The message I get is that This program must be run with administrator privileges. Aborting What Have I done wrong? I used su and gave my password, but it still is refusing to install.I am sure I am missing something very simple.
I am using vmware and virtualbox for experimenting with different linux distros and for using windows... When I switch to full screen, the upper portion(about 50px from top) of system becomes unusable because I am not able to click with my mouse anywhere there. So ubuntu's top panel becomes unaccesible and for vmware, once it becomes full screen I am not able to minimize/restore/close it.
In full screen mode, looking at the mouse cursor, it seems to be controlled by guest system when in full screen but as soon as I move it to top of the screen, the host machine takes control of it and then I cannot access any top panels or vmware toolbar. Is there any solution to this problem... Please let me know if more information is needed from my side.I am using opensuse 11.3, KDE4.4.4, vmware 3.1.2/virtualbox 3.2.10. The problem is for both vmware and virtualbox.
I've been having problem after problem trying to install virtualbox 4.0.2, on 32 bit opensuse 11.3. I've been able to jump over a few hurdles by installing the kernel source. But now I get this error when starting virtualbox from the command line:
Code:
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (2.6.34-12-default) or it failed to
[code]....
I am have some issues getting VboxAddtions installed. I try to mount a shared folder and I get... FATAL: Module vboxvfs not found. When I try to install the additions I get...
Code:
jgleaso@linux-s7o8:/media/VBOXADDITIONS_4.0.4_70112> sudo ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........
[code]....
openSUSE, just installed 11.2 some days ago and have several problems with kernel 2.6.31 and my hardware, i was wondering if there is a way to upgrade it to version 2.6.32... that i know i dont have any problems with it.The problems that i have is with my ath9x driver, iv'e experience it before with other distros and the same kernel (2.6.31)Another question i have is about VirtualBox, i use it to run windows, and i'm amazed of the lack of speed and performance i have in openSUSE, i dont know if it's because i'm doing something wrong, quite possible since i'm not familiar with the -suse way- of using linux... i read the wiki about virtualbox made all that it's said (used OSE and non-OSE) and nothing changed... it's unusable. i used to use it in other distros with no problems, but in suse i have alot of issues.
apart from all the issues i have concerning speed and performance in openSUSE it's worth of a try.hope that configuring it better will speed up and increase performance.btw, i have a amd athlon x2 2.1ghz, ati radeon hd3200 using fglrx module and 4gb of ram.
I have Sun VirtualBox setup on my OpenSUSE 11.2 system.(KDE)
How can I run VirtualBox when Linux boots?
Is there a way to pin VirtualBox to Desktop 2?
Im trying to install opensuse 64 bit on virtualbox, but it keeps telling me virtualbox is a 32 bit machine. Is there anyway to do this, I'm pretty sure i'm using 64 bit virtualbox.
View 4 Replies View Relatedmy error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I'm trying to run OpenSUSE 11.2 on VirtualBox (ver3.0.8 on Ubuntu 9.10). The installation proceeds without a hitch, but when I try to login, the login manager (kdm?) complains that the login failed. When I go to the console, my login/password do no work there either. I've tried installing OpenSUSE 11.2 three times -- the first two times, it complained about the simplicity of my password -- and all three times I've run into this problem.Have other users encountered a similar problem? It doesn't seem like a VirtualBox-specific issue. Is the /etc/password being changed somehow?
View 5 Replies View RelatedWhen there is a total of 2 GB of physical RAM, how much RAM would you give to openSUSE-11.2 (i586) with KDE as a VirtualBox guest in Vista? There is no intention of running a second VM at the same time.
View 6 Replies View RelatedInstalled OpenSUSE in VirtualBox to try out. Boots ok but can't capture mouse! I installed with all defaults and using Gnome. Host OS is Ubuntu. I'm running XP fine in VirtualBox and wanted to test drive OpenSUSE.
View 9 Replies View RelatedI have installed oralce-xe 10g on CentOs. I am facing error while connecting it
SQL> connect
Enter user-name: HR
Enter password:
[code]...
I am running OpenSuse 11.3 64 bit and I just tried to install Virtualbox 4.0.0-22.1 from the Virtualization repository.
--
ttblum@toddb05:~> VirtualBox
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed:
[code]....
i am installing oracle database 10g2 in my fedora12 with the help of this link ORACLE-BASE - Oracle Database 10g Release 2 (10.2.0.1) Installation On Fedora 7 (F7)Now i am start my Database using sqlplus:[oraclelocalhost ~]$ sqlplusSQL*Plus: Release 10.2.0.1.0 - Production on Thu Sep 16 10:53:47 2010Copyright (c) 1982, 2005, Oracle. All rights reserved.Enter user-name: /as sysdbaConnected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
[code]...
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Ive been running VirtualBox with a windows XP installation for some time, on an opensuse 11.0 host for some time. Recently, however ive been having issues with suse, and want to take my virtual XP and make it a primary bootable physical partition, on a second disk
I know it can be done, but im not finding how exactly.
What ive tried so far. I've taken VBoxManage terminal tool and converted the VDI to a .img file, and tried to move that to my second physical disk, but it didnt work at all.
After some thinking, I booted to acronis true image within my virtual machine, and cloned the C:/ drive of windows over to my second hard drive. That got me further, but doesn't boot fully. Comes up to windows xp logo, and black screen boot loops.
Ive heard about using vditool to create a .raw file, and then go from there, but im at a loss to find vdi tool
How can i move my virtual machine to a physical, bootable partition on a second drive?