Red Hat :: Setup The "NIS" Server - Unable To Start The "ypbind" Service
Sep 14, 2010
I am trying to setup the "NIS" server in my server . But I am not able to start the "ypbind" service. May I know anything wrong in my configuration?
( 1 ) type "system-config-authentication"
( 2 ) tick on "NIS" Support and key in "RHCE" as NIS Domain and "IP_Address" ( My test computer IP Address , is it correct to use my server IP address ? )
( 3 ) click OK twice.
( 4 ) I received the following error message.
[root@server ~]# system-config-authentication
Stopping portmap: [ OK ]
Starting portmap: [ OK ]
not registered: 100000 2 tcp 111 portmapper
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
I trying to install RALUS on my RHEL 5 os version 2.6.18-8.el5 (i386) My backup exec server is BE 2010 R2 the installation of ralus completes however with error libstdc++.so.5 missing noted that due to this i'm unable to start ralus service /etc/init/VRTSralus found a link [url] need to download compat-libstdc++-33-3.2.3-63.i386.rpm tried the rpmfind.net and as well as rpm.pbone.netid did find appropriate rpm however could not download one.
How do i setup an email service? I have my server configured and everything (ip tables, fail2ban, able to access it, open ports, blah blah blah) and now i want to get me some emailing service on it!
I am trying to accomplish an objective, I need to get 389 Directory server installed in the process however is it possible to just have email addresses of users in the LDAP server? I have a primary domain, example 'abcefg.com' with about 3,000 users and several hosted domains like 'xyz.com' and 'mno.com'. The end goal is to speed up email processing, so instead of the Barracuda asking the email server(s) if a user exist it queries the LDAP.
Is there a way to configure 389 Directory Server to contain just the email addresses of the end users to allow the Barracuda to poll the LDAP server to verify the email address is valid. The rest of the authentication like password is handled by the email server. So in the end the LDAP server would just contain the email addresses (live) and the Barracuda would query the LDAP asking if joebob@abcefg.com exist if it does carry on. If user xxeedd@abcefg.com does not exist drop it and go on.
Problem: This morning, our NIS master server down (due to ram prob), and what happen is all the sun servers able to bind to NIS Slave, able to communicate to other sun and windows servers but not Linux servers.
Detailed Problem: sun_server[sab]% rsh linux01 o_ypcall: clnt_call: RPC: Unable to receive; errno = No route to host sun_server[sab]% telnet linux01 Trying 10.x.x.x... Connected to linux01. Escape character is '^]'.
i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
I have using ubuntu nis server (LTS 8.04.1) and all nis client fedora 6,7,8,9 its working fine yesterday I installed new client os fedora 11 and configure nis client I started ypbind service can't start I did client configuration.
After I stop ip6tables and iptable and network Manager Shutting down NIS service: [FAILED] Starting NIS service: [ OK ] Binding NIS service: ....................... [FAILED]
I am in the task of migrating old linux to new linux which centos 5.5. while moving out all apps ,data etc.I need to configure SSL in apache.I have installed mod_ssl with apache 2.2. i went though some docs to configure with certificate that I have . Not sure how to start the service in 2.2. The apache/SSL was configured in my old server which apachectl. SO after importing certificatr , I do ./apachectl startssl to take in effect. In my new server , the http service is /etc/init.d/httpd, not sure how to start SSL service in centos 5.5.
rhev-h starting NFS service why occur under issue message? [root@RHEV ~]# /etc/init.d/nfs start Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK] Starting NFS daemon: [FAILED] [root@RHEV ~]# tail /var/log/messages 2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading 2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory 2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg) 2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
I try to start clamd service since I found "PROCS CRITICAL: 0 processes with command name 'clamd'" from nagios. so I check at its log file at "tail /home/clamav/logs/clamd.log" it said that log file exceeding maximum limit so I try to rotate log by
i am using RHEL5 at VirtualBox,at the time of installation i did create two partition one for / and another for swap.Now my /var directory is taking too much space and i decided to create a new partition with required size and mount that partition to /var.Now http service wont start and i did not reboot yet.
Ok, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.
i meet problem on named service, i want to configure my DNS with bind...after i /etc/init.d/named statusThis shows :"rndc: connect failed: 127.0.0.1#953: connection refusednamed is stopped"
My actual mail is via pop3 from verizon. What I've done so far is just pull my pop3 mail onto my main machine at my house. But I'm finding I'd rather have a single imap server on my network so then all my machines could see the same mail.
I don't really want the imap server to poll verizon for mail, I just want the imap server to check pop3 mail at verizon only when one of my mail apps checks into it to look for mail.
I found a way to capture emails sent from my Drupal installation, and Fakemail seems simple enough.
I can follow the tutorial. Since the application Fakemail needs to be running to capture the outgoing emails, it seems like a good candidate for xinetd, yes?
I've found a simple config tutorial describing starting the service and what the parameters are for the service-specific configuration files. This got me this far,
Code: # default: on # description: This is a script to start the Sandbox app "fakemail" service fakemail {
[Code]....
But the service is not starting up.
Or, recommend another application which uses a similar configuration like Sendmail so I can copy this
The Fakemail application/service is started from command line like so, # fakemail.py --host=localhost --port=10025 --path=[path_to_email_textfile]
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
I am new to clustering. I have created this scenario on VMware Workstation after reading numerous links and videos.
Few of them are [url] [url] [url]
Code:
I am using a shared GFS2 filesystem mounted on /data for this purpose which is from openfiler.
Code:
I am trying to create a HTTP cluster so that if in case of one node fails - Shared partition (/data) in my case gets mounted on the other node - Also, HTTP services can be started on the other node.
/data has the index.html file which is read by HTTP. Also, I have configured HTTP such that it only listens to 192.168.1.100 (shared IP) on port 80.
Code:
I have configured the cluster, service "sharedIP" which has IP 192.168.1.100; I took help of this doc.
Code:
Member Status: Quorate
I have tested the service sharedIP failover by powering off the machines one by one.
I used the below command for failover
Code:
Now, I need to try running apache from shared IP 192.168.1.100 which will fetch file from /data/index.html
I tried no. of times to configure service and resource for apache.
But somehow, it is not happening. My apache bin is /usr/local/apache/bin/apachectl start|stop
I have given such long info to help some other newbie. I will certainly write a HOW-TO for this.
