General :: Unable To Installation Of Vlc
Feb 1, 2010i am not able to intall vlc in fedora.
View 3 Replies
ADVERTISEMENT
General :: [gentoo:installation] Unable To Login With Root?
Jul 22, 2011I downloaded Gentoo and burnt it on CD.I did boot the livecd and the system passed starting stage and it recognised my hardware. After that, there islivecd login prompt, and obviously I tried to use root and no password but it says login incorrect. This is what I did:
Code:
livecd login: root
Password: [hit enter here]
[code]....
General :: Unable To Access / After Installation On New Hard Disk
Feb 18, 2010I had very recently installed a new hard drive on my laptop. After installation, I tried to install linux from the CD and followed the instructions. I did not create a partition in the hard drive and carried out the installation procedure. After installation, i tried to start but it would not start...and shows error. I am not sure what I should do ...please instruct me in a step by step procedure to solve the problem
View 1 Replies View RelatedGeneral :: Fedora 13 Installation / Unable To Install Multiple Distributions / Partition?
Dec 19, 2010I am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity.The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this.I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda
/dev/sda1 the boot of 500MB formated as ext4
/dev/sda2 the swap of 6096MB formatted as swap
/dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this.
However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition.As a result I am unable to make use of the remaining space on the HDisk.I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
Would appreciate some tips on how to install the other versions of Linux on this HDisk....
Ubuntu Installation :: Unable To Install Kubuntu 10.4 - Unable To Find A Medium Containing A Live File System
Aug 15, 2010I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
General :: Unable To Find Medium With Live File System - Error In Ubuntu Installation
Dec 1, 2009I had been trying to install Ubuntu 9.10 after formatting my machine. When i select install of the welcome screen, the logo blinks for few minutes and then displays a error as
Code:
Unable to find medium with live File System
Then goes to busy box.
"The same thing appears with Ubuntu 8.10, which i was using before!"
General :: Unable To Install The USB_ModeSwitch - Unable To Connect Micromax 300G Modem In Debian
Jun 30, 2011I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedGeneral :: Installation Of Ubuntu Alongwith Windows Xp And Unable To Access Data From Windows
Mar 1, 2011Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
General :: Unable To Boot Into Windows Vista Installation And Only Boot Fedora
Jan 28, 2010Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
Fedora Installation :: Unable To Change Installation Location For Boot Loader
Dec 2, 2009I am unable to change the installation location for the boot loader when installing Fedora 12 in the graphical installation mode. The 'Change device' button does nothing when I click on it during installation. I'd like to install the boot loader on my /boot partition. Is there some kind of bug that is preventing me from doing this?I am trying to install from the Fedora 12 386 DVD.
View 4 Replies View RelatedUbuntu Installation :: Unable To Fix Broken Adobe Flash Installation?
Apr 7, 2010I just installed Ubuntu 9.04 again on my PC after a long time. Everything was working fine. No problems at all. After running all the necessary updates, I wanted to install Adobe Flash. This I did by going to Adobe's site. I selected the APT version for 9.04+. It was installing fine UNTIL there was a power cut. Since then I have been trying out various methods of repair suggested in these forums. But again and again get the same message:Quote:
W: GPG error: http://archive.canonical.com jaunty Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
W: You may want to run apt-get update to correct these problems
Ubuntu Installation :: Unable To Finish Installation Of 10.10?
Feb 28, 2011I am not able to finish the last step in the installation of Ubuntu 10.10. It asks me to fill in "Who are you?" information, but the forward button is not activated and I am not able to click it. I have tried to burn a new image cd and try again but I get the same error. My computer is an Acer Aspire 5220. I attach a picture of the screen.
View 3 Replies View RelatedInstallation :: Unable To Run Ubuntu / Get Around This?
Dec 17, 2010I just got a HP G56 108SA and i was planning to install Ubunti 10.10 on it but ive yet to be able to even get the system to boot.
I downloaded the ISO of ubuntu 10.10 64bit, burnt it with nero and ran the disk it starts to load and you see the ubuntu text with the scrolling blocks under it and after a few mins i notice the DVD drive is no longer flashing but the screen still shows ubuntu with the scrolling loading graphic.
Left it for 20 mins and still doing the same thing, anyone know how to get around this?
Ubuntu Installation :: Unable To Use PPA?
Jan 30, 2011I have added the LibreOffice PPA (ppa:libreoffice/ppa) and when I do a
Code:
sudo apt-get update
the update just ignores the PPA (relevant lines below):
Code:
Ign http://ppa.launchpad.net/libreoffice/ppa/ubuntu/ maverick/main
[Code]....
Debian Installation :: Unable To Install 7.6 On Kvm
Jan 21, 2016Earlier , centos 6.6 & kvm was installed & over it debian 7.6 was installed & it was running fine.
Due to some issue we had to format the server , now we are able to install centos 6.6 & kvm but not debian 7.6. We are installing via media, from where can i download debian 7.6 iso.
we are installing it on hp dl 360 g9 server, we are able to format the disk inside the kvm & after when it start copy the operating system it throws error & error is Installation Setup failed, try run the failing item from the menu, I have tried the following
1. Replace the media & checked same error
2. Realter the partion & checked same error
3. Tried to install with guided partion & checked same error.
Fedora Installation :: Unable To Install Vxl In 9
Jan 16, 2009install vxl-1.11 using cmake and am getting various problems like Avi File NOT found and many more files Dart,ECW,DC1394,MPEG include dir,Xerces bxml are not found. install vxl...and i would like to know what are they dependency packages required to be installed for vxl....
View 14 Replies View RelatedFedora Installation :: Unable To Install F10 Via Dvd
Jan 17, 2009Hi, I attempt to install f10 via dvd. I am asked about my language and keyboard. When I move on from here I get a message. the fedora disk was not found in any of your cdrom drivesI toddle off to my laptop and the install works fine My computer has 2 drives - CD & DVD. Does this message indicate that the computer is only looking at the CD drive. I guess I need to add some options to the install command.
View 1 Replies View RelatedFedora Installation :: Unable To Get Any Sound,?
Feb 14, 2009Fedora having just installed F10 with the gnome desktop.
I am unable to get any sound, I have an M-Audio Audiophile 2496 soundcard. This worked "out of the box" on my previous linux system - PCLOS Gnome but in Fedora I have no sound at all.
what I need to do or should this have worked with the default install?
Fedora Installation :: Unable To Install On New Pc
Apr 13, 2009i have recently got a system assembled with the following configuration
intel g31 mainboard
intel core2duo 2.8 proc.
4 gb ram
1 gb ati radeon hd4650 pci xpress card
160 gb harddrive with win-xp pro
i have been trying to install fedora 10 since last week but i am not able to run it in gui mode the anaconda installer tells me failed to load in gui mode and running in text mode only. i am new to fedora and am next to unknown. what should be done to get the fedora running on me computer
Fedora Installation :: Unable To Install The 10
Jun 16, 2009During installation of fedora 10 i depare with a issue that requires internet connection to proceed the installation. since i don't have a internet connection in eth0 just have one in wlan0 that is not detected by the configuration i didi not could install the fedora 10.
What was my mistake, i download the Fedora-10-i386-netinst.iso to boot. Should i download another image to boot.
Fedora Installation :: Unable To Install The 11
Jul 4, 2009Last week I put together a new build:Asus p6t deluxe v2, i7 920, etc etc And installed Win7 RC which worked perfectly, however for the past couple days I've been trying to install Fedora but it seems to never work. The F11 Full disk cannot load anaconda during install, but still manages to install, however the installation cannot boot. The live disk loads, but then a black screen with eth0 and eth1 link is down pops up. So I tried other dists, Ubuntu 8.04 cannot boot, 9.04 boots and installs, but after reboot doesnt work. Anyone got any ideas as to why I cannot install Linux. Also in Win7, I cannot install Fedora as a VM. It just goes to 100% load while booting and such.
View 7 Replies View RelatedFedora Installation :: Unable To Upgrade To 13
Jul 21, 2010I burned the Fedora 13 x64 DVD, booted from it, and attempted to upgrade my Fedora 12 x64 OS. It found my previous installation than asked my what to do with my boot partition. I chose to upgrade it, rather than skip or whatever else, only to eventually be met with a message saying the partition is too small by 9M. Really ? This is a 100 MB partition. Is 100 MB now too small for a boot partition ?
View 1 Replies View RelatedFedora Installation :: Unable To Add Partitions?
Nov 9, 2010ive bought a new laptop, dell studio 17, and now ive wanted to install fedora 14 (64 bit), but after a few minutes the first problem appeard. Ive wanted to add the partitions and it always tells me that it "Could not allocate requested partitions: not enough free space on disks."
the funny thing is this, that my hard disk has got 500GB memory space and 150GB is full
EDIT: Win7 is running at the hard disk... could this be the problem?^^
Fedora :: Unable To Find Avg At End Of Installation
Nov 30, 2010I am installing Avg on F14 it's looks like installing perfectly no eror appearing but unable to find avg at the end of the installation. What should I do now?
View 7 Replies View RelatedUbuntu Installation :: Unable To Upgrade From 9.04 To 9.10
Sep 5, 2011last month i had ubuntu 9.04 on my pc but i formated and i install 9.10 then i formatted again with windows xp and now i want to install again the 9.10..but when i try to install at the boot ubuntu docent boot up also fedora(12),opensuse and ubuntu 9.10 but with ubuntu 9.04 everything is ok..i try to upgrade from 9.04 to 9.10 using update manager but when i restart my pc ubuntu doesn't boot up?
View 1 Replies View RelatedUbuntu Installation :: Unable To Install Using CD / USB Or PXE
Jan 2, 2010I have an older dell CSX laptop that I would like to load up with ubuntu or kubuntu... or anything other than XP. The problem is that the laptop does not have the option to boot from USB, I don't have a CD/Floppy drive to attach to the media bay and I don't have a pcmia that will PXE boot... So, do I have any other options? I really don't want to go purchase anything for this laptop because it's old, but if I could get it reloaded with anything it would be ok for a netbook... It will boot into XP, but its very sluggish.
View 5 Replies View RelatedUbuntu Installation :: Unable To Configure Sun JDK On 9.10
Jan 7, 2010Installed SUN JDK usnig the following command on Ubuntu[ 9.10 Karmic Koala]. It seems already there is a default version(open jdk) but i want to use SUN JDK for Android development.
when i run a simple program i get the following error
# javac HelloWorld.java
The program 'javac' can be found in the following packages:
* openjdk-6-jdk
* ecj
* gcj-4.4-jdk
[Code].....
Ubuntu Installation :: Unable To Boot Up From It
Feb 17, 2010I have just completed a fresh install of Ubuntu 9.10 and i am unable to boot from the HDD. when i restart my pc its stays on a black screen with the words grub_. I am able to boot into the OS by booting up to the live CD then choosing to boot from hard drive...I am also able to run the live CD. I have tried reinstalling this a few tiems...and it is only Ubuntu and not duel booting
View 3 Replies View RelatedUbuntu :: Installation Error And Unable To Log In?
Mar 20, 2010Been trying to fix this problem myself the last day or so.After trying to create a back up on thursday which failed due to lack of space [followed thishttp://ubuntuforums.org/showthread.php?t=35087]I also think that i had run the update manager and installed updatess i know that i removed some of the default games as well.Booting up my laptop on friday morning i recived this error message"Install errorThe configuration defaults for GNOME power manager have not been installed correctly.please contact your computer administator"The login screen is now in a low graphics mode and when i try to login the screen goes black with some text in the left hand corner which is impossible to read as it only flashes up for a second and i am returned to the login screen.
View 5 Replies View RelatedUbuntu Installation :: Unable To Upgrade From 8.04
Apr 7, 2010I cannot upgrade from 8.04. I go to the update manager, and it says everything is up-to-date. I've tried going in through terminal.
View 2 Replies View Related