General :: Unable To Access / After Installation On New Hard Disk
Feb 18, 2010
I had very recently installed a new hard drive on my laptop. After installation, I tried to install linux from the CD and followed the instructions. I did not create a partition in the hard drive and carried out the installation procedure. After installation, i tried to start but it would not start...and shows error. I am not sure what I should do ...please instruct me in a step by step procedure to solve the problem
View 1 Replies
ADVERTISEMENT
May 31, 2010
This is Mushtaq here. I am using CentOS 5.3. Everything works fine regarding Hardware Support except of External Hard Disk. I have a HDD Western Digital 80 GB in USB converted case. Its working fine under WinOS, Fedora 10 / 11 / 12 + & RedHat Enterprise Linux. But CentOS is unable to access it even it does not detect it (fdisk -l command is used to verify the connected disks). Can any one please help me in this regard, I am fed-up of this situation.
View 1 Replies
View Related
May 8, 2010
I'm having some problems booting ubuntu 9.10 and I just want to backup my files and install it all over again. I want to access my old files from the ubuntu Live CD, because no kernel is working. Is there a way?. Just in case, I don't have partitions, so I don't have a 'home' one (but I'm going to).
View 1 Replies
View Related
Sep 23, 2010
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies
View Related
Feb 4, 2010
After completing the installation of Fedora-FEL edition, I cant boot from my hard disk. "No bootable device found " error appears.
I have one Windows XP & 2 Linux installation in my disk.
I tried to restore grub using "setup (...)" command.but same error repeats.
Even I cant restore Windows XP using "fxmbr" command in... recovery console .
But I can boot from that drive by "chainloader" command in grub. code...
Running above command in grub terminal boots my hard disk ("hd1" is my "unbootable disk")
View 2 Replies
View Related
May 14, 2010
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies
View Related
Apr 6, 2010
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
View 2 Replies
View Related
Mar 10, 2011
Newbie to Linux Ubuntu 10.10. Got the installation done on the wrong disk, How can I move the partition or uninstall?
View 1 Replies
View Related
May 8, 2010
i'm having some problems booting ubuntu 9.10 and i just want to backup my files and install it all over again.I want to access my old files from the ubuntu Live CD, because no kernel is working.Is there a way?. Just in case, i don't have partitions, so i don't have a 'home' one (but i'm going to
View 5 Replies
View Related
Feb 2, 2011
i have one hard disk drive in my ubuntu second user is cant access that drive so wt to do to give access permission
View 1 Replies
View Related
Mar 19, 2010
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
View 5 Replies
View Related
Mar 29, 2010
i'm using athlon 64 bit , asus a8vmx mbd, 1gb ram
View 3 Replies
View Related
Jun 30, 2010
mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies
View Related
Mar 1, 2010
I have a hardisk shared on my windows machine. And I would like to be able to access this on my opensuse notebook. Just cant figure it out. Dont have much experience in opensuse. I just need to know the best way to do this. Also, can opensuse read/write NTFS? Also I have a printer on my moms machine that runs XP home. The printer is shared I would like to be able to print but its no biggie. It some type of HP 3 in 1. I just wnat it to print, I dont care about the scanner and stuff.
View 3 Replies
View Related
Jan 26, 2011
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it has the following configuration.
Code: $> sudo fdisk -l /dev/loop0
Disk /dev/loop0: 10 MB, 10977280 bytes
255 heads, 63 sectors/track, 1 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/loop0 doesn't contain a valid partition table Now what I want to do is develop a c++ program to read & write files to this loop back device,which I'm using to simulate an actual hard disk,at the blocks & sectors level. So far I've come up with the following code. But I'm still unable to read files from the hard disk one block at a time.
Code: #include <iostream>
#include <stdio.h>
using namespace std;
int main() {
char block[512]; int length=0;
cout<<"Implementation of the File Handler Read Method..."<<endl;
FILE *f = fopen("/dev/loop0", "r");
if(f == NULL) {
cout<<"Error In Opening the HardDisk File Retuning Error..."<<endl; return -1; }
//Read One Block of Data to Buffer length = fread(block, 1, sizeof(block), f);
/* Do something with the data */ cout<<"Length : "<<length<<endl;
return 0; }
When I run this Program All what I get is the message for NULL. "Error In Opening the HardDisk File Retuning Error...". So I could open the loopback device as a file an access it at the sectors & block level.
View 1 Replies
View Related
May 6, 2010
I am unable to copy video cds on my hard disk.yet they play in xine,the cds are in ISO9660 format and i am using 10.04 lucidlynx(gnome).
View 9 Replies
View Related
Aug 10, 2011
I really need some help here. I was installing Ubuntu 11.04 supposedly on a Desktop but I had my external hard disk connected via USB. This external hard disk had two NTFS partitions with lots of important personal and my works.
I accidentally installed Ubuntu upon it and I believe I had created new Linux partition for the Ubuntu installation. Is there any way to undo everything?
View 6 Replies
View Related
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Aug 14, 2010
I currently dual-boot Win7 and Ubuntu 10.04, before I came back on Ubuntu, I uninstall-ed many programs to free up some space. Before I restarted my computer to boot back into Ubuntu my Internal HD had 43.5GB of free space, and when I booted into Ubuntu I checked the free space and it only showed 7.9GB of free space, did I check the wrong thing? Is 'File System' the Ubuntu equivalent to the C: drive in Windows?
View 9 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Feb 8, 2009
It all started when I decided to take the plunge and install Linux, bearing in mind that I am still completely dependent on Windows. I decided to go for Ubuntu, hearing that it is user-friendly and easy to learn. My current machine dual boots to WinXP & Vista. Following the guide regarding pre-partitioning, I decided to delete a partition I no longer use so I can install Ubuntu on there. Using XP's disk management, I deleted said partition, but it somehow also deleted my Vista partition! As a result, I am now unable to boot to Vista. I went back to XP, and ran Partition Magic to fix the partition tables. However, I get an error saying something about the partition's drive letter can't be identified. Decided to resinstall Vista but when it asked me where to install, I noticed that it only shows 3 partitions instead of 4 (my data partition has somehow vanished as well). Then I heard a noise from my HDD, and it suddenly reboots. Decided to log back to XP, but I am unable to boot to XP as well (got BSOD'ed).
Got my XP setup disk to reinstall, but this time, XP setup only recognizes one big partition(250gb).... and below the partition there is a note that says "Setup unable to access disk." I also tried the recovery console, and on the C: prompt when I did the chkdisk, it says something about invalid file path or can't find the path. Tried the Vista install again, it was also unable to access the disk. So what happened? Is my HDD dead? Finally, I thought I'd give Ubuntu a try. Decided to do the "Live CD" first, and wow, nice user interface! Then suddenly, I saw my "data" drive and "winxp" drive! Everything is accessible and all my files were there. I was overjoyed knowing that it didn't wipe out any of my files. So I guess my main question is, should I go ahead and install Ubuntu and will I be able to get those files back? Is there a program similar to XP's disk management? And finally, I know not related to Linux, but how can I boot back to XP?
View 5 Replies
View Related
Aug 19, 2011
I tried to install ubuntu 11.04 on my external hard drive (WD My Passport, thats all i remember about the name) and all was well, until I tried to reformat it from ext4 to FAT, and no such luck, it isn't even being READ, not in fdisk -l, not by gparted, disk manager, or anything else. Windows is no help at all... I tried that out of desparation.
View 9 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
May 27, 2011
Running fedora14 on a dell latitude-d600 laptop and I'm trying to access a 500gb sata external hard drive that is connected via usb. The laptop can see the drive as '500 GB Hard Disk: 524 MB Filesystem' and it's clearly mounted under the '/media' directory. However, when I attempt to read the files on it, I am only able to see the 524mb section of the drive. The external hard drive is an ext3 file system (running fedora13) and I believe it's encrypted.
View 14 Replies
View Related
Sep 27, 2010
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
View 9 Replies
View Related
Sep 17, 2010
I have installed SUSE yesterday.Everything has been fine except two.1. I can't access my hard disk drives. It says it need to install online some software for it but it can't.I am attaching a screen shot of the error I encounter.2. I have Ubuntu installed in another disk drive but in the Grub menu there in no option to boot to Ubuntu OS.How should I change the text in 'menu.lst' to solve the problem?
View 6 Replies
View Related
Feb 4, 2010
OS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
View 4 Replies
View Related
Oct 10, 2009
How to install either Fedora 11 or 12 from the hard disk of this old ragged laptop? USB or CD installation are not an option, and since the documentation keeps crashing and I stagger saliently in the messy script that is hid behind the windows interface runtime gimmick, I would like to know which switches would make the rebooting operation take to reckognizing the linux package?
View 1 Replies
View Related
May 11, 2010
I'm trying to install Ubuntu 10.04 amd64 on a system I recently built that currently has Windows 7 installed.
Strangely, when I booted from the install disk, I got an unrecoverable error. [URL] said in that case, try to install from a live session, so I did that.
Live session install worked fine until I got to the partitioning section of the setup. Nothing displayed in the partition space and all my partition options were greyed out!
I have tried several things. I tried booting from my Lubuntu 32 bit that I know works (running on my laptop), it could not detect the hard disk either.
I tried booting into Windows 7 and shrinking the partition in the Windows partition manager and seeing if Ubuntu's installer would detect the space that way...no such luck.
cfdisk would not work either. Gave a big fat cannot access the disk error.
fdisk -l displays nothing. Gparted from the live session is a no-go as well.
BTW, relevant hardware:
GIGABYTE GA-770TA-UD3 AM3 AMD 770 SATA 6Gb/s USB
Western Digital Caviar Blue WD5000AAKS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
I wouldn't think that Ubuntu should have a problem detecting this...
View 4 Replies
View Related
Oct 26, 2010
I have a problem with seeing the partitions from a hard disk in ubuntu after installing updates. I installed the fresh 10.10 x64 desktop edition yesterday and I could've seen everything from the live CD. I think that it started to be missing after installing about 65 updates (those were the recommended updates).
In windows 7 everything is fine. I can see every partition like this:
Disk 0 and Disk 2 are basically the same (SATA) and Disk 1 is a rather old ATA drive, but in Ubuntu I can only see the partitions from the Disk 1 and 2. Ubuntu is installed to the 93.13 GB partition on Disk 2. Grub is installed to Disk 1 and it is the first boot device (not sure if this matters). The partitions from Disk 0 are not displayed on the Places menu bar.
After typing:
Code:
sudo fdisk -l
It only displays some info about Disk 1 and partition Storage and then hangs. The hdd led is lit constantly. It doesn't even display the info about the partitions on Disk 2, even though if I can browse those two partitions. And when I want to reboot, the ubuntu logo displays but it hangs there and I think that this is due to this problem with the hdd recognition.
View 2 Replies
View Related
