I tried to add a new launcher to a xfce panel on an Ubuntu 9.04. The problem is that I want to create a launcher for a .txt file - and the launcher does not give me the option of choosing "type". I read the following:
[Code]...
I use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
I have noticed that the icon for launcherspplication in terminal) I create has changed.The icon was previously "preferred.png" but now it is "nonpreferred.png" - see attached pics. ow can I select the "preferred.png" icon when I create a launcher? Also, in what directory are these located?
View 2 Replies View RelatedI have a java.jar (PCGen) that only works correctly if I run it with sudo from the terminal. I have to cd into its directory and run it as
Code:
sudo java -jar pcgen.jar
I would like to use a menu launcher instead of having to use the terminal each time. I tried
Code:
sudo java -jar /path/to/file/pcgen.jar
No luck. This .jar only works properly if ran as root, is there any easy way to do this?
When I choose the network password type WPA for example it doesn't work. Currently on my Dell Inspiron 1750 64 Bit am dual booting Ubuntu and Linux mint. I have the driver installed for the wifi card (Broadcom 802.11 Linux STA wireless driver). Installed on both Ubuntu and Linux Mint, I don't know if there the exact same but very similar if not. So now I will get to the problem. When I click the wifi network button (Ubuntu is top right on panel, Linux Mint is bottom right on panel) and click the network I want to join the pass key box pops up.
But when I click the down arrow (WPA & WPA2 Personel selected by default) it just highlights the default selection, already stated. The weird thing is it does it for both Linux Mint and Ubuntu now. See, it didn't do that before I installed Linux mint and just had ubuntu. Wish I could post a screen shot but it would be a hassle without having the computer with Internet. I tried changing themes still does the same thing. Right when I installed the driver it worked fine with my home internet where I installed it using a ehternet cable. But now that I am trying to connect to a new network and it does this.
...it only gives the option to Save the file. I don't want to save it. I get a PDF file nightly, which contains the next day's work orders for my job.I'd like to just open the file. It's always attached to an email and opened using Yahoo mail.As it stands right now, I must always save it to the Desktop, then delete the previous day's file. Any idea how to change this? I've set the option to "Always Ask" in Edit --> Preferences --> Applications --> PDF Document.What else can I do? I seem to recall a fix where you'd delete a file containing all the preferences. I'd prefer not to do that, as I have them all set the way I want.Plus...and this is weird...it'll occasionally ask me to choose between opening the file or saving it
View 6 Replies View RelatedMy development target environment is intel corei5 architecture. I want to build my source for i5 architecture. I am paning to use gcc 4.5.1. In the gcc manual i found an option to select the cpu type(-mtune = cpu_type).There is no i5 processor in the cpu type options.If i use -mtune=generic, will it produce optimized code for i5 architecture or it will produce the code for generic x86_64 architecture?
View 2 Replies View RelatedI am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
Ok I just downloaded this program called Phex, it is a really cool program and i get it to run, but only from command line. I downloaded this program and its already compiled and works fine but i can only launch it from a command line by typing "java -jar phex.jar" I have created launchers before and they have worked, but this one just doesn't work. I have all permissions on the directory and the files, but how to create a launcher for this file.
View 8 Replies View RelatedI was in the process of installing Ubuntu 11.10, but got stuck choosing which file system to use. ext3 and ext4; which is better for a personal desktop? If ext4 is better, will it work well on my old PC (bought 3 years ago), or perhaps ext4 is not actually compatible with an old hard disk?
View 4 Replies View RelatedI have no idea what happened to my OS(ubuntu10.04).it doesn't give me any option to enter my login name & passwd.i just get a blank(default) login screen.last time when it worked,i was trying to install GTK+2.8,but due to my mistake i deleted glib using cmd (sudo apt-get purge glib)and after that i even tried to launch terminal but it failed to launch.also tried to play media files using vlc but it didn't work.so i tried to restart my os and finally got stuck in the problem.i have no idea what to do,please help.Is there any cmd to see what problem occurred or which package is missing.
View 14 Replies View Relatedi used to have ubuntu 9.i decided to move to sabayon so i used the live cd to install it ,resize the ubuntu partition and use the remaining space for sabayon.while the resizing procedure i got an error(i dont have a copy of the error log file but i know it has something to do with an anaconda process).i aborted the installation and the result was an filesystem that couldnt be mounted.when i try to mount the hdd i get this:
Code: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so and this is what i get from fsck: Code: $ sudo fsck -f /dev/sdb1
code....
Is there anyway to make Nautilus have a "Create Launcher" item under the File menu? Is there some plugin I can install or file I can edit? Launchers are very useful but always having to create them on the desktop first then move them to where I want is pretty annoying.
View 3 Replies View RelatedI am having a bit of an issue with xubuntu's resolution detection. I currently have a monitor plugged into my machine, the xubuntu machine picks up the native resolution of 1920x1080, but for some reason it does not give the option for 1366x768. i find this weird because any monitor that can do 1920x1080 should be able to do 1360x768 as well. The machine is running an intel card, so manual resolution changing via nvidia control panel isnt an option. Im wondering, what is the simplest way to enter a custom resolution into xorg.conf, or any other easy methods of adding the 1360x768 option into the machine?
View 1 Replies View Relatedmy ubuntu install is running pretty well, but I need to boot into Windows 7 to print and convert some proprietary OneNote files.The trouble is that while my menu.lst shows a Windows option - and a few others, too, that don't seem to show up in grub2 - grub does not give me the Windows option. In fact, it seems to follow only the contents of grub.cfg.I have tried running sudo update-grub, and it does work, but does not resolve the problem.
View 2 Replies View RelatedI unplugged the Windows drive, during the installation of Ubuntu 9 (to make things easier). 2 separate drives. When installation was complete, I plugged the other drive back in (now both are plugged in). I went to the BIOS and made sure the Linux drive was the set to boot before the windows drive. The only thing that comes before that of course is the cd drive
CD-0
HDD-1 (linux)
HDD-0 (windows)
I booted into linux after this and ran 'sudo update-grub'. The cmd was successful. However, when rebooting it does not give me the option to boot to windows. Why not? PS. If I go to Places (under GNOME bar), Then I can see (and mount) the windows drive. So it is accessible.
In Unity is there a way to have the launcher hidden at all times and only pop-up(out?)when you press the super key? It's just annoying when it keeps popping up if i accidently hit the top corner whilst moving back and forth from web pages?
View 4 Replies View RelatedI am installing ubuntu on a Dell m7750n machine that has the KSOD. I have done almost everything I can find to fix it. I was able to remove my data off of it using regedit....
So, I am sick of MS and found linux. I installed unbutu netbook on my netbook and it works like a charm.....
So, I went to install this on my desktop dell.... I have read of the many issue with this...
I was not able to boot from the CDlive as is. I kept getting a black screen with nothing. I then used the f6 to get into grub and then choose f6 to change the load options to load nomodeset and was able to load ubuntu from the drive, not install.
I would like to install ubuntu, but when I click on install from the 'tester' version it will not give me the option to install along side another OS (windows) that I see in the install ubuntu main website in the see how to do it.
I get two options:
Erase and use entire disk
Specify partitions manually (advanced)
Question: Can I install and select my own partitions using: [url]
Or, is there something wrong and I need to get that fixed before I install ubuntu?
Is this a DELL issue or KSOD issue?
I currently have Windows 7/Ubuntu 11.04 dual boot, and have decided to get rid of Windows. So I booted up the Ubuntu installation CD which gives the following options on install:So my question is: will my personal files (which I have on partition 'D:', separate from the Windows installation partition) be erased with this option?
View 5 Replies View Relatedhow can I create a shell script for ssh where I don't have to type the password manually?I have learned expect command and I have tried multiple examples, but it didn't work.
View 7 Replies View RelatedI have installed opensuse 11.4 couple of days ago. Installation went smoothly. Everything is working just fine except the screen resulation. My Monitor supports up to 1366*768. The Display Settings in 11.4 gives option of 1366*768, But whenever I maximize any window (say firefox, opera etc) I can not see the close button & scroll-bar. Here is my xorg file of monitor.
[Code]....
I get this option if I right click on /dev/sda1. And why is there a triangle icon with an exclamation mark next to it.
View 5 Replies View RelatedThe only options I have are to install via the web, how do I add the cd drive to xen.
View 1 Replies View RelatedA while ago I messed up my Ubuntu installation so I decided to boot the install from the disc again and overwrite it. It turns out the installation disc does not give you the option to replace a current Ubuntu installation so I was forced to take more space out of my windows [vista] installation. This means I now have 1 ruined Lucid Ubuntu OS, 1 Working Lucid Ubuntu OS and a windows Vista OS system. Is it safe to delete my ruined Ubuntu from inside vista? Is it possible to overwrite my Ubuntu installations? How can I delete them both and then install Lucid again?
I want to know this now as Maverick Meerkat will be released on Sunday and I want to install that in a clean installation without deleting my vista installation. I do not have the Vista installation disc because Vista came pre-installed. I am not willing to buy anything.
Does Ubuntu 10.10 allow you to resize your windows partition and install ubuntu on the resized partition? I'm trying to get ubuntu installed on my laptop but the only option it's giving me is to delete all partitions and install ubuntu. I don't want to delete any partitions because I have backups on my second partition and the first partition has windows on it and I would like to keep it.
I've tried 10.04 and it doesn't give the option for resizing but I thought that one of the versions gives he option for this, is it 10.10? I've tried to manually resize but it won't let me because I have to many primary partitions, so I would have to delete the last partition to get it changed to extended correct?
I get an error when trying to convert a .avi file to a .iso file using Devede. If I leave the "Create a menu with the titles" option as is I get no error. But I don't want any slideshow so I untick that option. I then get this error when the process is almost done; Failed to create the DVD tree Maybe you ran out of disk space I do have enough disk space so that can't be the problem. Anyone know what to do about this problem?
View 4 Replies View RelatedI want to give my users option of logging to the system. They should have posibillity for choosing option betweend logging to the system with their default password or one-time password OTPW. I installed OTPW in my Debian. Here is my /etc/pam.d/sshd file:
[Code]....
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I am trying to make a copy of the SD card that my TS-7800 SBC boots from. When I plug the SD into my opensuse pc I get this error. Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so There are four partitions on this card and I can only access one of them.
dmesg | tail gives me this
[894.422497] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
when I do e2fsck -p /dev/sdb4 I get
e2fsck: Bad magic number in super-block while trying to open /dev/sdb4 /dev/sdb4: The superblock could not be read or does not describe a correct ext2 file system. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> I was hoping I could just plug in both cards and do this dd if=/dev/sdb of=/dev/sdc to copy everything and have a back up SD card.
I'm trying to add chromium to the launcher on the left side but right clicking it doesn't list the option.It's there with other apps, but not this one. How do you add it?
View 2 Replies View Related
