My development target environment is intel corei5 architecture. I want to build my source for i5 architecture. I am paning to use gcc 4.5.1. In the gcc manual i found an option to select the cpu type(-mtune = cpu_type).There is no i5 processor in the cpu type options.If i use -mtune=generic, will it produce optimized code for i5 architecture or it will produce the code for generic x86_64 architecture?
View 2 RepliesI was installed linux mint in windows 7 using option "Install inside windows"... I got trouble with windows7 so i reinstalled it... but now there is no option to select OS at the start up... But i have the drive where i installed mint and all other files.. Is there any way to get it back.. Because i dont have time to reinstall mint...
View 1 Replies View RelatedWhich hardware components tend to cause compatibility issues? And how do you select a generic option that might work with your hardware?
I don't currently have any problems but curious to find out if there is a sequence of steps.
i used to have ubuntu 9.i decided to move to sabayon so i used the live cd to install it ,resize the ubuntu partition and use the remaining space for sabayon.while the resizing procedure i got an error(i dont have a copy of the error log file but i know it has something to do with an anaconda process).i aborted the installation and the result was an filesystem that couldnt be mounted.when i try to mount the hdd i get this:
Code: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so and this is what i get from fsck: Code: $ sudo fsck -f /dev/sdb1
code....
I reinstalled Ubuntu after a disastrous install of gnome 3. I installed the mscore fonts etc. When I select a ms true type font I just see a row of squares instead of letters
View 2 Replies View RelatedAm carrying out installation of CentOS-5.5 on a Sun fire X2270 server using PXE. The installation starts well but on getting to the keyboard type the installation halts. I have plugged in a USB keyboard unfortunately, am unable to select the keyboard type even on reboot as the keyboard is non-responsive.
View 2 Replies View Relatedi have script it is for installing a program when I run it on terminal an old type GUI with a scroll bar and options appears. I can go from option to option but the first one is default selected and I can not select any other one it is something like that:[*] option 1
[] option 2
[] option 3
I can go over option 2,3,.. but the first one is default selected [*] with the asterisk. How can I move asterisk to any other option? when i go over another option and hit enter it is executing the default one.
I installed Ubuntu 10.10 desktop edition. I followed the instructions for installation available on "ubuntu.com". After installation at restart I didn't get window to select operation system. It restarted with already available Windows SP3 OS. The drive on which i installed ubuntu is not shown on windows.
View 1 Replies View RelatedI installed goblin by run GoblinUI.ymp and logged out.
After I logged out, I chose meego as session type and tried to login again.
I entered correct password, but when I press enter after type password , display change to black and got some message and backed to login session again.
On the other hand, I succeed in running MeeGo Live CD(1.0.1 build 1.4).
I wrote MeeGo Live CD image on USB Flash Driver by using Win32 Disk Imager, and boot that one successfully, although it has some flaw.
Network Settings Window is stuck in workspace and can't move or close, so it cover other appication's window. Internet on toolbar is broken, so I have to run FireFox in application toolbar to use internet.
I'm using Netbook based on Atom CPU and GMA.OpenSUSE installed in my netbook is installed by KDE Live CD image.
Should I Use Gnome to use Goblin, because MeeGo is using Gnome? Or.... what is problem make Goblin doesn't work?
I want to recompile apache so I can select a different MPM compile time option. I have looked in the graphical application manager, but I don't see a development version of apache like you do for many of the packages. Am I not looking in the right place for the source code for the Apache 2.2.17 available with FC14?
Alternatively, I can download the source from apache.org for 2.2.17. However, the install options default to a host of different directories than the FC14 version does. Being somewhat OCD I hate to mess up my FC14 system by installing to a bunch of anomalous directories, and I don't want to break anything. I can change the default install directories, if I knew what the FC14 apache 2.2.17 was compiled with. There is an httpd-devel-2.2.17-1 package. But the description makes it sound like it is for developing additional modules. I want to recompile the main httpd-2.2.17-1 package. Does anyone know if this is a possibility?
I'm about to install a version of Ubuntu onto a 32GB flash drive, I've downloaded are Universal USB installer that will do most of the work for me, however, it asks
Step 4: Select a persistence option for your USB
and the options are
1GB CASPER -RW
2GB CASPER -RW
3GB CASPER -RW
4GB CASPER -RW
What is persistence? am I better off having more (ie 4GB) since my flash drive is a 32GB drive?
I'm trying to install Ubuntu 8.04 on my pc but every time I select an option to install from the cd, the pc reboots and I go through the same thing again.
I've tried installing within windows but that just installs a folder with Ubuntu in but I can't start Ubuntu up when it's finished installing?
I just replaced F14 with F15 (clean install). Now, when I try to add my HP Deskjet 710 printer I'm not seeing any option to select the parallel port. I've tested the hardware with an old F10 live CD, and every thing's okay there. Does the parallel port still exist in F15, or has it been nuked?
View 2 Replies View RelatedIn order for TRIM to work on an SSD with encryption, I need to make sure to "select the AHCI option before installing the operating system."Does anybody know how to do this? I have no idea what this is talking about. I'll be installing 11.04 with no dual-boot. Just Ubuntu alone.
View 9 Replies View RelatedI have an arbiter which determines and manages a lab. I am wondering if it's possible to remotely control the grub boot selection. Right now I have to wait for the nodes to boot, check the hostname and then rsync the new grub configuration and reboot the node, it's VERY timely so I am wondering if there is an alternative to this method?
View 2 Replies View RelatedI am trying to make a copy of the SD card that my TS-7800 SBC boots from. When I plug the SD into my opensuse pc I get this error. Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so There are four partitions on this card and I can only access one of them.
dmesg | tail gives me this
[894.422497] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
when I do e2fsck -p /dev/sdb4 I get
e2fsck: Bad magic number in super-block while trying to open /dev/sdb4 /dev/sdb4: The superblock could not be read or does not describe a correct ext2 file system. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> I was hoping I could just plug in both cards and do this dd if=/dev/sdb of=/dev/sdc to copy everything and have a back up SD card.
I tried to add a new launcher to a xfce panel on an Ubuntu 9.04. The problem is that I want to create a launcher for a .txt file - and the launcher does not give me the option of choosing "type". I read the following:
[Code]...
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
I've recently upgraded to 11.04.Till now, I could select an option to make the open folders on shutdown, to restore on startup.There was an option to restore running applications
View 5 Replies View RelatedI'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies View RelatedI split my partitions - root and home.In the installation of Ubuntu you can see the partition table if you edit it manually. You can see the partitions, devices, etc. What if I select the wrong file system on a partition I am not formatting? Example - if I format root but keep home, but home is EXT3 and I select EXT4 (or vice versa) what happens?
View 5 Replies View RelatedI have been trying to mount an NFS share from my REHL server for over an hour, and Google was not able to help me. when I use the command:
mount -t nfs server3:/programs /programs
I get the folowing error :
mount: wrong fs type, bad option, bad superblock on server3:/programs,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so
I am writing as yesterday, my fourth hard drive within 2 years crashed. Is that normal? One was crashing 2 years ago, one in winter 2009 and 2 just within 2 weeks. What can be the reason for so many crashes? I heard maybe the power supply? How can I find out if that's broken? The voltages at least in BIOS seem normal. The SATA controller? How do I know if its broken? Can I just but one PCI-E card with SATA adapters? Is it the motherboard? Theres not much more in my computer... As well, its wired that my good-old 160 GB drive never crashed, only constantly the bigger ones. Here some typical error code from mount and dmesg:
Code: mount: wrong fs type, bad option, bad superblock on /dev/sdb2, missing codepage or helper program, or other error
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: BMDMA stat 0x4
[Code]....
For some time, I have been trying to install fedora 14 on my pc, as I want a dual boot machine. It has windows xp already installed and running. I used liveusb creator to make a bootable usb. the problem is, when I log in and start the installer, it runs until I get the option "Select storage device". When I select the appropriate option , basic storage device, the installer screen disappears, and nothing more happens. I shall be much obliged if someone can point out the problem. My computer is a Dell optiplex 745 , 2.8 GHz with 512 Mb of RAM.
View 5 Replies View RelatedI have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View RelatedUbuntu 10.04 has just failed to load from my hard drive, so I've resorted to booting from CD just to get the machine going.I'm wondering if my main boot drive has gone caput??When trying to mount it using DISK UTILITY...get the message: Error mounting volume
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so
The last Windows OS I use is XP to run work software. Now my father-in-law Paul, has asked me if I knew what's with the printer drivers on W7. I was surprised by not knowing, for everything else I use Ubuntu. So here's the question when trying to print Paul gets a popup that says he must right click and select "run as administrator" but when he right clicks the option isn't available. I'm going over there tonight so does anybody know what Microsoft has worked out to make their OS safe and what I should do about getting his printer printing?
View 1 Replies View RelatedI am sure that this is very simple but I have installed sound juicer and the gstreamer plug ins. The problem is i still cannot select MP3 as an output output option
View 3 Replies View RelatedI am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.