I want to have LinuxMint, Fedora and OpenSUSE installed alongside Windows 7, and have the option to choose which one to boot from some sort of bootloaderow can I set up a bootloader (let's say, grub, or the windows bootloader) to be able to correctly boot all 4 OSs? And imagine I add Slackware to another partition, will I be able to easily add Slackware to the bootloader
View 3 RepliesI currently dual-boot XP and Debian sid. I currently have XP on /dev/sda1, sid on /dev/sda2 with /home mounted separately on /dev/sa3, swap is /dev/sda4. I have free space in both sa3 and 4, mostly in 4, of course. What I'd like to do is add a third partition, either with or without a separate home mount, but have my current grub2 still be the bootloader. I'm thinking I'll give a total of 33 G to it (I keep almost nothing on my hard drive, it's all on the cloud). I want to install Kubuntu and try it out, I've burnt the Live CD and it's very cool.
View 9 Replies View RelatedI have a few 1U servers with one on-board VGA and one PCI slot (will install a dual vga card). I'd like to use three monitors at the same time to have a triple setup.I need to display 3 different websites from on system. My question is if Linux (fedora 14) will support three monitors? I found some old school dual vga pci cards for like $7.99-LOL.
View 1 Replies View RelatedI i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.
View 2 Replies View RelatedSo my grub menu is showing several selections for each of my OS's. In Ubuntu, my OS of choice for now, how can I access the grub and edit it.
I would like to know the steps for console, but also I hope somebody can show me how to use Super Grub to do it.
I need to find the best way to triple boot XP Win7 and Debian, with Debian installed first on my laptop. VMWare, Wine and Cedega cant do what I need with how I run my laptop, which is equivalent to my portable laptop/workstation. Is there a partitioning tool in Debian that I can install to make a small partition for each? I also hace to set up GRUB instead of the Windows BL.
View 1 Replies View RelatedI'm a newb and have ambitions for a triple boot with MAC/W2K/#! 9.04. I first installed Ubuntu on C600 laptop and then switched to Crunchbang 9.04 since the Dell is lacking any ooomph. Now I'm trying to triple boot an HP Pavilion a330n (AMD Athlon, non-SATA board which has created problems getting Leopard to play nice, but that's another story). I removed the HD from the C600 (W2K) and replaced it with another running only #!. I installed the W2K laptop drive as master on the HP desktop with a 120GB IDE drive as slave. The 120GB drive has been partitioned for 4: MAC (35GB, ext3), W2K (35GB, NTFS), #! (40GB, ext3) and Linux-Swap (remainder, ext3).
Now to the question: I was planning on using the DD command to "xcopy" the W2K drive to the W2K partition. Sounds simple. I am trying to use the following:
dd if=/dev/sda2 of=/dev/sdb3 bs=4096 conv=notrunc,noerror
To back up a step, I saw somewhere else suggesting to boot live and run off the CD to facilitate this since I'm manipulating both hard drives. Since I'm working live, I've had some trouble sorting out password issues with root. I managed to change the root password (I know - dangerous, but only for this session anyway). Each time I try to execute the dd command, I get nada. No activity. The cursor drops below the root@crunchband:~$ prompt and just blinks. There is no important information to be lost on either drive per se, but have lost the W2K install CD long ago which is why I need to use DD anyway.
trying to triple boot XP, Ubuntu, RHEL 5.4but unable to bring every thing in boot loader.* It loads XP with Ubuntu successfully or XP with RHEL 5.4 but not all the three.* when I install XP followed by Ubuntu then RHEL, I am not having a primary partition to install RHEL. It stops there.* I tried to copy the kernel path of ubuntu from grub.cfg in ubuntu and tried to edit in grub.conf file of rhel and added an entry but it displays in boot loader [start screen where it displays all OS listed] but unable to boot ubuntu [unable to load ubuntu kernel].Current situation reformat all Linux partitions and installed Ubuntu with below partition. installed successful. But rhel not installed due to error.Partition table:
/dev/hda1 > XP [primary patition][can boot and work]
/dev/hda2 > Ubuntu [primary patition][can boot and work]
/dev/hda5 > swap for ubuntu [secondary partition]
[code]....
So I just bought a 500GB HDD, now I want to use these three OS on my PC. I know how to dual-boot XP with 7, but i'm new to linux. BTW, would i need 3 partitions for these 3 Operating systems (1 for each) or can i install Ubuntu in one of those two windows partitions? (eg. C: XP&ubuntu, D: 7). What would be the easiest & fastest to do? And how to do it?
View 4 Replies View RelatedI have installed Linux Mint 9 within Win XP and have installed an additional HDD as a Slave on the same IDE cable as my DVD drive. I installed ubuntu on to the additional HDD using the live CD and when I try to boot the computer I am greeted by two versions of GRUB?! First version appears to be the one that comes with Mint and so asks me to boot either Windows or Mint, when I select Mint I get ubuntu's version of Grub, it asks me to boot one of three OS's; here's where it gets weird:
Top of screen says:
GNU GRUB Version 1.98-1ubuntu5-1mint2
If I select Win, it boots fine. If I select Mint it boots fine however if I select Ubuntu it says:
error: no such device
error: file not found
error: you need to load the kernel first
I pressed "e" within grub and was faced with this:
insmod ntfs
set root ='(hd1,1)'
search --no floppy --fs-uuid --set f6422203421e479
loopback loop0 /linuxmint/disks/root.disk
setroot =(loop0)
linux /boot/vmlinuz-2.6.3-21-generic root =dev/sdb1 loop=/linuxmint/disks/root.disk ro quiet splash
initrd/boot/initrd.img-2.6.32-21-generic
I install Win7 firstthen I install Ubuntu in a separate partition it run ok with grublast i install fedora in a separate partition it run with 2 choice win7 and fedoraI use hiren boot cd to boot with mini linux and run grub 2.0 application on it.i set up and run i only use Win7 and booot linux error.
View 2 Replies View RelatedI'm not exactly a newbie to Linux and it's OS, I have been using Ubuntu since the 8.xx release. I have two hard drives in my system, Hard Drive #1 is the primary drive and is 250GB, this hard drive is only used for Windows 7 Pro 64bit. The second hard drive is 320GB and split into two partitions. The first half has Windows XP Pro on it and the second partition has Ubuntu 10.04 on it. Both are split evenly at 160GB each. Here's how I did it, I first started by loading Windows XP Pro onto second hard drive, using the entire drive, once all updates and settings were applied I then installed Windows 7 Pro 64bit onto the first hard drive and used it fully. Once all settings and updates were applied I restarted the computer and it loaded directly into Win7, which is to be expected. I opened my computer, browsed through the second drive to make sure all files were intact.
I then downloaded and created a USB installation drive for Ubuntu 10.04. After the creation of the USB drive I proceeded to install Ubuntu 10.04 on my second drive, using half the space for Windows XP Pro, and half the space for Ubuntu 10.04. After that was all setup and done, I restarted one last time. Low and behold Ubuntu 10.04 and Windows 7 both appear on the boot menu, however Windows XP Pro does not. I panicked for a few short seconds but after logging into Windows 7 I realized all my XP Pro files where safe. So now I have 2 hard drives with 3 operating systems. Hard drive one has Windows 7 only and hard drive 2 is split between XP Pro and Ubuntu. However I cannot get Windows XP Pro added to the boot menu no matter how hard I try. I'm not entirely confident using the terminal as I am just starting to learn programming, but I know how to enter the commands and get things moving.
Every website that I look at tells me I need to start by editing some grub/menu.lsd, which for some reason does not exist or is "invalid directory". Some websites say I need to run "sudo apt-get grub-update", which again is an invalid command. Here's what I need. A step by step tutorial on how to add my XP into the loading menu. Example of step by step includes "Step 1: Open Terminal" and etc... It needs to be basic and down to earth. Don't just tell me to run codes and type a bunch of junk because that doesn't seem to work for me. I do not know what (hd,0) or (hd,1) means, but assuming the websites are correct, (hd,0) would be my Windows 7 HD and (hd,1) would be my Windows XP/Ubuntu HD?
I currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
I pretty much know nothing at all about partitioning hard-drives and unspeakably less about linux as a whole. but i really want to get into it. (The HP Mini 311 is what i am using)
Okay so a couple of days ago (before i had ever heard of Ubuntu, or even thought i could ever use Linux based software). I had been Dual-Booting OSX Snow Leopard and Windows 7, while using Chameleon boot-loader, on my HP Mini 311. Even though my sound-card and network adapter do not work while running Snow Leopard.
I followed this guide for dualboot: [url]
So i heard about the new Linux Os Ubuntu, and after trying it for about 3min on a USB i was sold. So i began to make my HP a triple-boot now with OSX Snow Leo, Windows 7, and Ubuntu.
I did this by recreating the same dual-boot system as before, but this time saving room for Ubuntu to be installed to my hard drive, after SnowLeo and Win7.
I got this to work perfectly by creating a 4th partition for Ubuntu and a 5th for swap area.
Here is where my problem lies... I saw this tutorial for dual-booting Win7 and Ubuntu, while making another partition so that windows and ubuntu can share the same files.
Here:[url]
Once i tried doing this on my triple-boot(adding ubuntu partition, swap partition, and a "storage" partition, on top of the 3 partitions i created during dual-boot setup) My Windows 7 stopped booting. I read somewhere that hdds can only have like 3 primary partitions, which is the only kind of partition i know how to use. so i was thinking maybe i could put this storage partition in another mount location, such as /home or /usr, because i think the added partitions is what messed up my Windows 7 boot. My only problem is i have no idea what different mount positions are used for, nor how to use them properly.
One hard drive (I'll call it hard drive 1 for the sake of this post) has windows xp and ubuntu on it. It dual boots fine and Grub is installed in the MBR. I physically removed that hard drive and installed a higher capacity hard drive (I'll call it hard drive 2). This hard drive (hard drive 2) is a dual boot (win xp and linux mint) and Grub is installed in the MBR. It works fine.
Here's what I want to do:
1. Make hard drive 1 the master drive, and hard drive 2 the slave drive. I know how to do this (hd pin settings, master drive on the end of the ide chain, etc).
2. Have a grub menu that allows me to boot any of the OS's from any of the hard drives. As such this grub menu should have 4 entries.
What I think I need to do is add two entries to hard drive one's Grub; 1 for window xp (on the slave drive) and one for linux mint (also on the slave drive). How do I do that? However, I wonder if there is a way to tell hard drive 1's grub to link to the grub on hard drive two - i.e. to make an entry show up that when selected would show hard drive 2's grub menu options. Is this possible?
I've installed CentOS 5.5 64-bit on an external WD 500GB HDD. I went through the installation setup, and formatted the external HDD normally. (100M /boot, 250GB /, 248GB /tmp , 2.8GB swap). I also installed grub in the external HDD's MBR. After installation, I could boot up Linux on the same platform (Arrandale). However, as soon as I took it to a different platform such as Atom Pineview D525, it had all kind of problem on Grub, such as Grub Hard Disk Error, or it just hanged on grub loading stage {1.5,2}. Sometimes, if I'm lucky, I would get to grub command prompt, but rarely I could boot up. I would stuck at mounting file system.
I've searching a lot on Google, and people suggested to reinstall Grub, so I tried various method to reinstall Grub, but the same behaviors still exist. I can't guarantee the drive will boot...
I just tried to install OpenSUSE 11.3 on sda4 which is approximately the 2nd half of a 1TB drive, with a pre-existing Win7 installation on the 1st half. The installation summary (before it made any changes) told me "The bootloader is installed on a partition that does not lie entirely below 128GB. The system might not boot." Naturally, not keen on having a computer that won't boot, I aborted the installation.
Of course it's not below 128GB -- Windows is there.
Is there a workaround that is straightforward enough for someone who has very limited experience with GNU/Linux and isn't a comp-sci student?
I have windows xp on my first hard drive and Linux on the second hard drive.The windows hard drive is labeled hda1 and the linux hard drive is labeled hdb1.I am using GRUB to boot the linux hard drive and it is installed on hdb.Is there any way to boot the secondary linux hard drive using the windows bootloader?I have tried several online tutorials for it but none of them work.
View 5 Replies View RelatedI know that these forums aren't M$ support forums, but any mention of Linux and open source there just ends up in "don't use Linux"-type replies, so i figured i should ask it here. I have a quad-boot setup (Win7x64-Win7x64-K9.10x64-K9.10x64). I am in the process of migrating this setup to another (bigger) HDD. The Win7 system partitions were cloned using 3rd paty imaging software, Linux system partitions were cloned directly (cat /dev/sda5 > /dev/sdb5), data partitions were freshly created and populated with files copied from old partitions.
As the hard drive is bigger than previous one, i decided to add a little more space to Win7 system partitions. So when creating new partitions, i left 5GB unallocated space between them in order to grow the partitions later. I cloned the new partitions, ran the chkdsk with all options on to make sure the resulting partition survived the migration, then checked if it is readable under Linux (it was), used KPartitioner to grow the partition to the new size, again booted into Win7 Recovery, ran chkdsk with all options on, removed bootloader and made a new one using bcdboot.
Now, my Linuxes boot OK (there was some wankery involved but nothing too serious), but neither of my two Win7 can. I checked the bootloader, fiddled with different settings (e.g. removed setting the root by UUID), even tried to manually boot it from commandline - to no avail. After "chainloader +1" and "boot" it just does nothing. No error messages, nothing at all - the console screen doesn't even clear.
I have recently purchased a new laptop, which came with Windows 7 pre-installed. I immediately installed Ubuntu alongside it with a dual boot. At first it worked fine, but when I restarted after the first time I used Windows, I ended up with an 'Operating system not found' error. I was able to reinstall the Grub bootloader using an Ubuntu Live CD, which appeared to fix the problem, but the next time I loaded Windows 7 and rebooted, the problem reappeared I think the problem is that Windows 7, for whatever reason, is somehow removing or disabling Grub.
View 1 Replies View RelatedIm finally deleting vista from my disk, but as I am game addict I will re-install it afterwards just for games. Now I assume that will overwrite GRUB, so how do I restore boot record and at same time keep my grub config?
View 5 Replies View RelatedI have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies View Relateddoes anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
I'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
In the past, I've deployed new 64 bit systems and I've worked on and developed on 64 bit systems. But until a week ago, my workstation was a 32 bit system. Now, it is a 64 bit quad core Phenom II system, and I suppose I need to start the migration to 64 bit Linux. I do not want to blow off my system and rebuild it. This particular system dates back a decade and through many many updates. There is some digital debris in it, but there is also a fair amount of customization that I have implemented either for my own purposes or for customers, and to lose that customization would represent a headache for me.
What I want to do is install a 64 bit system over top of the 32 bit system. It is my hope that doing this would install the necessary 64 bit libraries, while not impacting the existing 32 bit libraries (except with some possible symlink problems). I then, hopefully, could boot into a 64 bit kernel while still running 32 bit programs. Is this feasible? My backup system is comprehensive; I COULD just try it and back up if my system became hosed. But I'd rather not; I have a lot of work to do and I'd rather not learn by doing in this case.
how to install Ubuntu 10.04 sixpac live cd released with July 2010 issue of Linux Magazine, on either mac triple boot or thru Virtual box. I already have Windows 7 on bootcamp partition of my macbook pro.
View 4 Replies View RelatedI've decided to triple boot on my system, but I want to make sure it's feasible. Here's my set-up: I've got two 500GB hard drives, and a good amount of power to handle the OS's. I want to set-up Ubuntu as my main OS on a single hard drive. Then, I want to put XP and 7 on the second hard drive, side-by-side. Obviously, I would then want a bootloader to display an option at system start to pick either one.
The reason I want all these is for gaming mainly, and Netflix. I've got old games that only work on XP, and some newer games are coming out that I'm sure will run better on Windows 7 (Starcraft 2 is going to be amazing!). I found this documentation: [URL]. It's obviously for dual booting Windows and Ubuntu. My question is, can I triple boot Ubuntu, Windows XP and Windows 7? If so (and I'm positive I can) are there any good resources for the process?
i'm currently dual booting windows xp and ubuntu with ubuntu installed first. is it possible to triple boot with opensuse 11.2?
View 3 Replies View Relatedjust started a new gig and trying to push CentOS out as part of a triple boot option on our mac intels. i have done some google'ing but haven't come up with much. this would make the whole process 10X easier.
View 1 Replies View Related