just started a new gig and trying to push CentOS out as part of a triple boot option on our mac intels. i have done some google'ing but haven't come up with much. this would make the whole process 10X easier.
View 1 RepliesBasically I have a triple boot setup on a mac pro tower. Windows /osx /centos 5.3 everything was great until I tried setting up my Wacom. I did get it setup but in the process revealed a problem I was having that I didn't notice until this point. Mind you my system boots perfectly everything runs perfectly except I believe my DVDrom and rear usb ports are trying to share the same IRQ and from what it looks like they don't want to play nice with each other. Eventually CentOS kills the IRQ thus killing both devices. Everything works fine on the windows and mac osx side. I have tried unplugging and replugging the DVDROM, I wanted to try another ide channel but the motherboard only has one. I have changed the device from auto to master to slave. When the DVDROM is removed i have no IRQ errors in my dmesg. I forgot to add that adding IRQpoll to my grub boot pretty much destroys the system.... hard lock within 20 seconds of loging in. In CentOS, is there anyway that I can force the DVDROM to it's own IRQ?
Handlers:
[<ffffffff8000d346>] (ide_intr+0x0/0x1df)
[<ffffffff801e65ca>] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #98
hda: lost interrupt
ide-cd: cmd 0x3 timed out
hda: lost interrupt
hda: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hda: request sense failure: error=0x54 { AbortedCommand LastFailedSense=0x05 }
I am trying to clone the hard drive to a slightly smaller hard drive in the same computer, same setup.What software or commands do you use to clone the entire system and resize the partition automatically?The original HD is a little larger than the destination HD. The source partition only has about 20 GB in use and the rest is blank.
I have 2 partition, a small 100MB boot partition and another 500GB LVM partition.I can't just clone from the original disk to the new disk. (for another long reason) I need to make an image of the original disk on an external USB drive first, then move that image onto a new disk.I have tried creating an image of the whole disk with Clonezilla, but then the restoration didn't work because the target drive is smaller than the original.
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies View Relateddoes anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
I'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
I have a finely working CentOS server. I want to clone the complete OS (over network) so that I can use it for same functionality on several other machines..
View 2 Replies View RelatedCurrently, I installed CentOS 5.4 into 2 HDDs in my PC. I have bought a larger capacity HDD and would like to clone/image everything over and retain my settings and preferences. How can I do it?
View 4 Replies View Relatedhow to install Ubuntu 10.04 sixpac live cd released with July 2010 issue of Linux Magazine, on either mac triple boot or thru Virtual box. I already have Windows 7 on bootcamp partition of my macbook pro.
View 4 Replies View RelatedCould you please advice how to clone CentOS with all installed software to another box.
What tools should be used?
I've decided to triple boot on my system, but I want to make sure it's feasible. Here's my set-up: I've got two 500GB hard drives, and a good amount of power to handle the OS's. I want to set-up Ubuntu as my main OS on a single hard drive. Then, I want to put XP and 7 on the second hard drive, side-by-side. Obviously, I would then want a bootloader to display an option at system start to pick either one.
The reason I want all these is for gaming mainly, and Netflix. I've got old games that only work on XP, and some newer games are coming out that I'm sure will run better on Windows 7 (Starcraft 2 is going to be amazing!). I found this documentation: [URL]. It's obviously for dual booting Windows and Ubuntu. My question is, can I triple boot Ubuntu, Windows XP and Windows 7? If so (and I'm positive I can) are there any good resources for the process?
i'm currently dual booting windows xp and ubuntu with ubuntu installed first. is it possible to triple boot with opensuse 11.2?
View 3 Replies View RelatedI have a working system with triple boot (Macos, Debian and Windows Xp).I have total 4 partitions, EFI, Macos, Linux Ext3 and Windows Ntfs. At this point I want to split my Windows partition and turn into the new user "Home" partition. I vaguely remember that there might have been some limitations with number of partitions regarding multiple boot schemes. Does anyone have an idea if there would be any problem if I go ahead and split my Windows partition and end up with 5 total partitions on this laptop?
View 7 Replies View RelatedI have a dual boot with vista on disk 0 and ubuntu on disk1. I just installed a disk 2 that I would like to use to try out other distros. Ubuntu is the only linux experience I have had. I'm really not very good at all of this, so my questions before I start loading another distro are:
1. Does Fedora use GRUB as its installer?
2. When I installed ubuntu on disk 1 (sdb1), the install was very simple. I chose sdb1 for the install, it loaded it, and when it was done I simply had the choice of which drive to boot into. Will installing Fedora on disk 2 (sdc1) be just as simple, or will I encounter steps I must take to make it so that I have a choice of which disk/OS to boot into?
I have a windows vista and fedora 11 64 bit dual boot. my diskstructure is as follows:
I have a swap of 6 gb.
I dont want to loose any of my existing OS's.
I have Vista and F11 dual booted on my system. I wan't to resize Fedora(I think Vista has already been shrunk as far as It can) and install Debian as a third OS. Fedora takes up all the free space and I am only using a small amount of the partition. I am not sure of the best way to do this. Can I boot the Debian live cd and resize Fedora at the partion step? Or do I need to boot a live F11 cd, repartition and then boot the debian cd? Or is there a better way?
View 1 Replies View RelatedI am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies View Relatedi am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
View 10 Replies View Relatedi'm trying to make my imac capable of triple boot.the software i use are:
mac os x 10.5.8
win vista sp1
linux opensuse 11.2
[code]....
I Currently have Windows 7 and Ubuntu 10.10 on dual boot system, but I want to change that. I want Win 7, openSuse 11.3 and Ubuntu 10.10 on a triple Boot. I have a 500gb sata hdd. The Rough Plan was to 150gb for Win7, 150 for openSuse 11.3 (50gb for / and 100gb for /home) and same again for Ubuntu 10.10 and 50gb for Swap. I am using entire drive for 3 Operating Systems and Swap. I have read a few guides and they all say install win7 then opensuse then ubuntu, and thats fine but none say anything about partitioning. And one main problem is cant split into more than 4 different partitions.
View 3 Replies View RelatedI would like to install Opensuse 11.4 on my macbook pro to do a triple boot. I found lots of tutorial on Ubuntu but not on Opensuse, and this facility is the same way?
View 3 Replies View RelatedI have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
I want to triple boot Windows 7, Ubuntu and Moblin/whatever other fast booting OS I come across. At the moment, I've got Windows 7 and Ubuntu there. I can make free space for Moblin, but how would I configure GRUB 2 so it reads it too?
Moblin does have a GRUB, but I'm presuming that its the legacy version, not GRUB 2. How would I get the Ubuntu GRUB back as the main bootloader if that were the case?
This is just planning, there will probably be more question springing to mind later on.
For completeness here's the history that got me to this point:
Stage 1
/dev/sda - disk with XP OS, set to be first boot disk in BIOS
/dev/sdb - a small data disk to supplement sda
[code]....
How would I install OSX on my PC so it would still boot to GRUB? And how would I add OSX to GRUB? Or should I use some other bootloader?
View 4 Replies View RelatedI have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
View 5 Replies View RelatedI've looked everywhere for a satisfactory answer, to no avail. I wish to triple boot xp/98/ubuntu 10.10. Is this an appropriate HDD setup? (it looks like this in partition magic pro srever 8.05)
*:SYSTEM........ NTFS......... primary ..........(for xp)
C:WIN98......... fat32 .........primary,active (for win98 )
*:UBUNTU....... LinuxExt3 ...Primary ..........(for Maverick Meerkat)
.........* Extended
............. *:SWAPSPACE2.... Linux swap .....logical
. ...........D: DATA................. fat32............. logical (for all things backup)
There is nothing on any of the drives at this point. (I am submitting this on a crappy 233mhz win95 laptop)
Here's the information i've gathered so far... Install in the following order: 98, XP, Ubuntu XP's drive label MUST be "SYSTEM" (I think?) Installing multiple os's is easy (i've read) if you hide unused partitions during install (ie. if installing XP, hide C:WIN98 and *:UBUNTU partitions) but i can only do this with FAT formats, and if i do that, the dirve letter changes, which is a problem (i suppose i could manually hide/unhide, and set active the partition I want at every boot-up....(Damn))
And here's a couple more questions SHOULD I make everything fat32? do they have to be primary to boot? ('98 on an inactive partition won't load) Once they are all installed... where do i put grub? Do i put it in first? Also, I deleted my dell utility partition to do this, is that a problem? (LOL, I have NO idea what I'm doing...Fck)
Like i said, finding information about the partition setup (logical/primary) is damn near impossible. Even if it's just a "Ya that'll do for a setup"
I'm gonna keep experimenting, since there's no longer anything to lose on my HDD, and i'll report back any improvements I come across
I want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
View 2 Replies View RelatedI wondered whether it is possible to add a PC-BSD system to my existing OS X 10.6.6 + UBUNTU (using rEFIt)
How to resize the partition with linux and installing PC-BSD 8.1 on my Mac?
First I installed OS X and updated it to 10.6.6
Then I created a BOOTCAMP-Partition using the bootcamp-utility
Then I installed rEFIt
Then I installed UBUNTU (and the dual-boot works very well)
Now I want to add a PC-BSD
May I change the partition-size of the UBUNTU-partition without destroying MBR oder rEFIt? If yes, will rEFIt recognize the newly installed PC-BSD?
Its sort of OSX+Multi-Linux. There is a wonderful page at [url] but unfortunately the section is not updated yet.
I need to find the best way to triple boot XP Win7 and Debian, with Debian installed first on my laptop. VMWare, Wine and Cedega cant do what I need with how I run my laptop, which is equivalent to my portable laptop/workstation. Is there a partitioning tool in Debian that I can install to make a small partition for each? I also hace to set up GRUB instead of the Windows BL.
View 1 Replies View Related