I need to find the best way to triple boot XP Win7 and Debian, with Debian installed first on my laptop. VMWare, Wine and Cedega cant do what I need with how I run my laptop, which is equivalent to my portable laptop/workstation. Is there a partitioning tool in Debian that I can install to make a small partition for each? I also hace to set up GRUB instead of the Windows BL.
View 1 Replies
So I just bought a 500GB HDD, now I want to use these three OS on my PC. I know how to dual-boot XP with 7, but i'm new to linux. BTW, would i need 3 partitions for these 3 Operating systems (1 for each) or can i install Ubuntu in one of those two windows partitions? (eg. C: XP&ubuntu, D: 7). What would be the easiest & fastest to do? And how to do it?
View 4 Replies View RelatedI install Win7 firstthen I install Ubuntu in a separate partition it run ok with grublast i install fedora in a separate partition it run with 2 choice win7 and fedoraI use hiren boot cd to boot with mini linux and run grub 2.0 application on it.i set up and run i only use Win7 and booot linux error.
View 2 Replies View RelatedI've decided to triple boot on my system, but I want to make sure it's feasible. Here's my set-up: I've got two 500GB hard drives, and a good amount of power to handle the OS's. I want to set-up Ubuntu as my main OS on a single hard drive. Then, I want to put XP and 7 on the second hard drive, side-by-side. Obviously, I would then want a bootloader to display an option at system start to pick either one.
The reason I want all these is for gaming mainly, and Netflix. I've got old games that only work on XP, and some newer games are coming out that I'm sure will run better on Windows 7 (Starcraft 2 is going to be amazing!). I found this documentation: [URL]. It's obviously for dual booting Windows and Ubuntu. My question is, can I triple boot Ubuntu, Windows XP and Windows 7? If so (and I'm positive I can) are there any good resources for the process?
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies View RelatedI am using Mac Pro with MacOS + Vista 32bit +Ubuntu installed. Using rEFIT with lilo bootloader. I want remove Vista 32bit and install 64bit Windows 7 instead. I am afraid of trying to install Win7, because it may delete bootloader. How can I remove Vista and do a clean install of Win7 to my Mac Pro without losing ubuntu and MacOs?
View 1 Replies View RelatedI had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies View RelatedHere is my dilemma at first grub loads and I have this options:
1.ubuntu 9.04 with a new kernal (update via-- system update)
2.ubuntu 9.04 with old kernal
3.recovery
4.......
5.windows.
And inside windows there is another boot screen for
1.win-7
2.vista
Now I want to remove win-7 and install 10.04 in its place I want the safe/proper procedure to do it if there is already a thread like this then direct me there as I searched and did not get it.
I've got a mate that wants to put windows 7 dual boot with osx on his mac book pro. I have talked him into putting Ubuntu on as well I just don't know how and in what order. So what is the best way to do it? Any good websites/tutorials?
View 2 Replies View RelatedI have a working system with triple boot (Macos, Debian and Windows Xp).I have total 4 partitions, EFI, Macos, Linux Ext3 and Windows Ntfs. At this point I want to split my Windows partition and turn into the new user "Home" partition. I vaguely remember that there might have been some limitations with number of partitions regarding multiple boot schemes. Does anyone have an idea if there would be any problem if I go ahead and split my Windows partition and end up with 5 total partitions on this laptop?
View 7 Replies View RelatedI used debian several years ago, and I'm interested in trying it out again.Right now, I have a laptop running Windows Vista and Ubuntu 9.10 in a dual boot configuration. Here is the output ofsudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
240 heads, 63 sectors/track, 41345 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
[code]....
I recently bought a netbook on which Windows 7 Start Edition was installed. I partitioned the disk to install 2 other linux distributions : Backtrack 4 and Debian Lenny. Here is my partition scheme :
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc6a9bf3e
[Code]...
Partition table entries are not in disk order During both of the installs, I chose to install Grub. Unfortunately, when I start my netbook, it launches Windows 7 automatically and I do not see grub...
I have an HP Elitebook 8540w with 500gb hdd running win7.I plan to replace my blue-ray drive with an ssd using a hhd caddy. The problem is that i want to keep my first hdd (win7) as it is, and install on the new ssd 2 operating systems:win10 and debian 8.
View 3 Replies View Related'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
I'm a newb and have ambitions for a triple boot with MAC/W2K/#! 9.04. I first installed Ubuntu on C600 laptop and then switched to Crunchbang 9.04 since the Dell is lacking any ooomph. Now I'm trying to triple boot an HP Pavilion a330n (AMD Athlon, non-SATA board which has created problems getting Leopard to play nice, but that's another story). I removed the HD from the C600 (W2K) and replaced it with another running only #!. I installed the W2K laptop drive as master on the HP desktop with a 120GB IDE drive as slave. The 120GB drive has been partitioned for 4: MAC (35GB, ext3), W2K (35GB, NTFS), #! (40GB, ext3) and Linux-Swap (remainder, ext3).
Now to the question: I was planning on using the DD command to "xcopy" the W2K drive to the W2K partition. Sounds simple. I am trying to use the following:
dd if=/dev/sda2 of=/dev/sdb3 bs=4096 conv=notrunc,noerror
To back up a step, I saw somewhere else suggesting to boot live and run off the CD to facilitate this since I'm manipulating both hard drives. Since I'm working live, I've had some trouble sorting out password issues with root. I managed to change the root password (I know - dangerous, but only for this session anyway). Each time I try to execute the dd command, I get nada. No activity. The cursor drops below the root@crunchband:~$ prompt and just blinks. There is no important information to be lost on either drive per se, but have lost the W2K install CD long ago which is why I need to use DD anyway.
trying to triple boot XP, Ubuntu, RHEL 5.4but unable to bring every thing in boot loader.* It loads XP with Ubuntu successfully or XP with RHEL 5.4 but not all the three.* when I install XP followed by Ubuntu then RHEL, I am not having a primary partition to install RHEL. It stops there.* I tried to copy the kernel path of ubuntu from grub.cfg in ubuntu and tried to edit in grub.conf file of rhel and added an entry but it displays in boot loader [start screen where it displays all OS listed] but unable to boot ubuntu [unable to load ubuntu kernel].Current situation reformat all Linux partitions and installed Ubuntu with below partition. installed successful. But rhel not installed due to error.Partition table:
/dev/hda1 > XP [primary patition][can boot and work]
/dev/hda2 > Ubuntu [primary patition][can boot and work]
/dev/hda5 > swap for ubuntu [secondary partition]
[code]....
I have installed Linux Mint 9 within Win XP and have installed an additional HDD as a Slave on the same IDE cable as my DVD drive. I installed ubuntu on to the additional HDD using the live CD and when I try to boot the computer I am greeted by two versions of GRUB?! First version appears to be the one that comes with Mint and so asks me to boot either Windows or Mint, when I select Mint I get ubuntu's version of Grub, it asks me to boot one of three OS's; here's where it gets weird:
Top of screen says:
GNU GRUB Version 1.98-1ubuntu5-1mint2
If I select Win, it boots fine. If I select Mint it boots fine however if I select Ubuntu it says:
error: no such device
error: file not found
error: you need to load the kernel first
I pressed "e" within grub and was faced with this:
insmod ntfs
set root ='(hd1,1)'
search --no floppy --fs-uuid --set f6422203421e479
loopback loop0 /linuxmint/disks/root.disk
setroot =(loop0)
linux /boot/vmlinuz-2.6.3-21-generic root =dev/sdb1 loop=/linuxmint/disks/root.disk ro quiet splash
initrd/boot/initrd.img-2.6.32-21-generic
I want to have LinuxMint, Fedora and OpenSUSE installed alongside Windows 7, and have the option to choose which one to boot from some sort of bootloaderow can I set up a bootloader (let's say, grub, or the windows bootloader) to be able to correctly boot all 4 OSs? And imagine I add Slackware to another partition, will I be able to easily add Slackware to the bootloader
View 3 Replies View RelatedI'm not exactly a newbie to Linux and it's OS, I have been using Ubuntu since the 8.xx release. I have two hard drives in my system, Hard Drive #1 is the primary drive and is 250GB, this hard drive is only used for Windows 7 Pro 64bit. The second hard drive is 320GB and split into two partitions. The first half has Windows XP Pro on it and the second partition has Ubuntu 10.04 on it. Both are split evenly at 160GB each. Here's how I did it, I first started by loading Windows XP Pro onto second hard drive, using the entire drive, once all updates and settings were applied I then installed Windows 7 Pro 64bit onto the first hard drive and used it fully. Once all settings and updates were applied I restarted the computer and it loaded directly into Win7, which is to be expected. I opened my computer, browsed through the second drive to make sure all files were intact.
I then downloaded and created a USB installation drive for Ubuntu 10.04. After the creation of the USB drive I proceeded to install Ubuntu 10.04 on my second drive, using half the space for Windows XP Pro, and half the space for Ubuntu 10.04. After that was all setup and done, I restarted one last time. Low and behold Ubuntu 10.04 and Windows 7 both appear on the boot menu, however Windows XP Pro does not. I panicked for a few short seconds but after logging into Windows 7 I realized all my XP Pro files where safe. So now I have 2 hard drives with 3 operating systems. Hard drive one has Windows 7 only and hard drive 2 is split between XP Pro and Ubuntu. However I cannot get Windows XP Pro added to the boot menu no matter how hard I try. I'm not entirely confident using the terminal as I am just starting to learn programming, but I know how to enter the commands and get things moving.
Every website that I look at tells me I need to start by editing some grub/menu.lsd, which for some reason does not exist or is "invalid directory". Some websites say I need to run "sudo apt-get grub-update", which again is an invalid command. Here's what I need. A step by step tutorial on how to add my XP into the loading menu. Example of step by step includes "Step 1: Open Terminal" and etc... It needs to be basic and down to earth. Don't just tell me to run codes and type a bunch of junk because that doesn't seem to work for me. I do not know what (hd,0) or (hd,1) means, but assuming the websites are correct, (hd,0) would be my Windows 7 HD and (hd,1) would be my Windows XP/Ubuntu HD?
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies View Relatedi have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
I currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
I pretty much know nothing at all about partitioning hard-drives and unspeakably less about linux as a whole. but i really want to get into it. (The HP Mini 311 is what i am using)
Okay so a couple of days ago (before i had ever heard of Ubuntu, or even thought i could ever use Linux based software). I had been Dual-Booting OSX Snow Leopard and Windows 7, while using Chameleon boot-loader, on my HP Mini 311. Even though my sound-card and network adapter do not work while running Snow Leopard.
I followed this guide for dualboot: [url]
So i heard about the new Linux Os Ubuntu, and after trying it for about 3min on a USB i was sold. So i began to make my HP a triple-boot now with OSX Snow Leo, Windows 7, and Ubuntu.
I did this by recreating the same dual-boot system as before, but this time saving room for Ubuntu to be installed to my hard drive, after SnowLeo and Win7.
I got this to work perfectly by creating a 4th partition for Ubuntu and a 5th for swap area.
Here is where my problem lies... I saw this tutorial for dual-booting Win7 and Ubuntu, while making another partition so that windows and ubuntu can share the same files.
Here:[url]
Once i tried doing this on my triple-boot(adding ubuntu partition, swap partition, and a "storage" partition, on top of the 3 partitions i created during dual-boot setup) My Windows 7 stopped booting. I read somewhere that hdds can only have like 3 primary partitions, which is the only kind of partition i know how to use. so i was thinking maybe i could put this storage partition in another mount location, such as /home or /usr, because i think the added partitions is what messed up my Windows 7 boot. My only problem is i have no idea what different mount positions are used for, nor how to use them properly.
I am kinda new to Linux but because I started a linux-course I decided to install it on my desktop. Before I used Virtual Box or VMware so it was pretty straightforward but now I have a problem with booting into Win7. I decided to install Debian along with my Win7. From a hardware perspective the things are like this, I have 3 HDD, 2 on a RAID0 and the third will be the one with Linux. On the RAID0 matrix I installed Win7 first, all ok there.
Then I started installing Debian. I followed the installation wizard, I partitioned the 3rd HDD and selected it as the drive for Linux. Then after I installed Linux and rebooted I only saw Debian in the GRUBs boot options, no sign of Win7. I think it has to do with the RAID0 matrix which "houses" Win7. I disconnected the 3rd HDD, and now when I try to boot no sign of the Win7 bootloader thou the RAID0 is ok. The only message I get is "insert boot disk".
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
I believe a windows7 addition to a multiboot system has buggered up the time displayed on two other debian installations on the same computer, a X86_64 and an AMD64 respectively. I'm running unstable on the two Debian installations but #dpkg-reconfigure tzdata can't fix the problem. At the moment the local time is displayed as 15:59 when in fact it is 19:59 and UTC is displaying the correct local time. (19:59) when it should be 23:59 I'm sure this is related to something win7 did, because I only noticed it after the additionalinstallation. I just don't know how to change things back like they were.
View 3 Replies View Relatedhave my workstation dual-booting Mint 7 and Windows 7. I had no problems installing either OS. But now I need to run some software that just won't run on Win7, not even in compatibility mode. So I have to use XP. So I installed XP Pro on a 1TB drive connected by eSATA. Again, no problems with the install, smooth and easy. BUT, and I'm sure you know where I'm going with this, XP jacked up the booting. I lost the grub menu, of course, and I had a hell of a time getting my system back to where I started. I removed the eSATA disk (with XP on it) but could not use the standard grub fix (find /boot/grub/stage1, root(hd0), etc, etc.). I used the Win7 repair utility and that restored my ability to boot into Win7. I then was able to use the grub fix and was back to square one.
I tried adding XP to the menu.lst (using the correct hd address and all) but when I selected XP from the grub menu it said BOOTMGR was missing. I'm assuming Win7 wiped it out when I ran the win7 repair utility.So, does anyone have any idea how I can "easily" boot XP from the eSATA disk? I've searched the forums here and I think my scenario is a bit different than other tri-bootonfigurations.I can't install the drive in the workstation because there are no more slots left for an HD to fit. So it has to be eSATA.
Current rig:
Toshiba Satellite L455 laptop
Celeron 2.20 GHz
Windows 7, 64bit
3GB RAM
I downloaded the DVD release of Kubuntu 10.04, from Kubuntu.org. The file is: Kubuntu-10.04-dvd-amd64.rar . I burned it to a DVD, as image, with ImgBurn application. See any problems so far? I want to dual-boot, leaving my Win7 in tact. I am confident that I can handle this with some patient instruction.
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies View Relateddoes anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
