So my grub menu is showing several selections for each of my OS's. In Ubuntu, my OS of choice for now, how can I access the grub and edit it.
I would like to know the steps for console, but also I hope somebody can show me how to use Super Grub to do it.
It's quite easy to change the default boot entry through etc/default/grub. However, this only allows for the first entry to be changed. I want to be able to move all the entries in any order I like. What is the best/easiest way to do this?
View 1 Replies View RelatedMy grub2 boot entries never change. I have run sudo update-grub and it finds all the proper kernels and such and says that it has updated. I check with the menu.lst and grub.cfg and they both look to be correct
View 13 Replies View RelatedNow it's:
Ubuntu
Memtest
Windows 7
I want:
Windows 7
Ubuntu
Memtest
How do I go about doing it? Do I rename "30_os-prober" in /etc/grub.d/ to "10_os-prober" and "10_linux" to "30_linux"?
It seems each time I select 'restart later' after downloading updates I get extra lines on my boot screen.The top line works correctly to get me into Ubuntu & the bottom Win. How do I delete the unnecessary lines?
View 8 Replies View RelatedI have two hard drives - (1) 80GB (2) 500GB: the 1st HD has 3 partitions (in that order) - Windows 7, Ubuntu 10.10 & Swap. the 2nd HD is for storage only, and has 2 partitions.
I did the following - I installed Windows 7 on the first partition of the 1st HD, it booted just fine. Then I installed Ubuntu 10.10 on the second partition of the 1st HD.
Windows 7 shows in the GRUB menu alongside with Ubuntu. Ubuntu boots just fine, but when I select Windows it simply restarts the computer and the GRUB menu shows again.
RESULTS.txt of Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #3 for (,msdos3)/boot/grub.
[Code]....
I want to have LinuxMint, Fedora and OpenSUSE installed alongside Windows 7, and have the option to choose which one to boot from some sort of bootloaderow can I set up a bootloader (let's say, grub, or the windows bootloader) to be able to correctly boot all 4 OSs? And imagine I add Slackware to another partition, will I be able to easily add Slackware to the bootloader
View 3 Replies View RelatedI've just got a question about this. What if you wanted to change only the display sequence in Grub 2 (Ubuntu 9.10) and not which o/s boots first or is the deault o/s? In previous versions of grub you could just copy & paste the lines in /boot/grub/menu.lst, but this version of grub doesn't allow you to edit /boot/grub/grub.cfg...
View 11 Replies View RelatedIntalled GRUB using Live CD. My problem is very similar to these..
Code:
1. sudo grub-install --root-directory=/mnt /dev/sda
2. sudo mount -o bind /dev /mnt/dev
3. sudo mount -t proc none /mnt/proc
[Code]....
There are 2 osx entries in the grub menu one is 32-bit and the other is 64-bit, how i can get rid of the 32-bit one? i am using ubuntu 10.4 and snow leopard 10.6.3
View 9 Replies View Relatedi'm using ubuntu 9.10... i'm working on some projects on L4 microkernel... i want to add it to the grub...i was familiar with the earlier grub, i.e editing the menu.lst...
title = L4Ka:istachio/i586 pingpong
kernel=/boot/kickstart
module=/boot/i586-kernel
module=/boot/sigma0
module=/boot/pingpong
how can i do this in new grub version...? i tried adding the following to /etc/grub.d/40_custom but failed...
menuentry "L4Ka:istachio" {
set root=(hd0,9)
kernel=/boot/kickstart[code ]..........
grub is giving me six (6!) repetitions of my Ubuntu Lucid install on sda5, five repetitions of my old karmic install on sda1, and I think four of the recovery option.Where have I told it to do that? How do I fix it??The grub choices look like this:
Code:
most recent lucid kernel on sda5
most recent lucid kernel recovery option
[code]....
I have a dual-boot grub2. On the list, there are Ubuntu 10.04, Memtest x86, and Windows7. I was wondering if it is possible to make Windows 7 first in the grub boot list. At the moment Ubuntu is first, so if it's possible to make windows 7 first.
View 2 Replies View RelatedI have made a custom grub2 menu however, both the default and the custom show together. So my grub looks like the list below, the bolded entries are my custom ones. How do I get rid of the duplicates? I have tried apt-get remove and deleting old kernels.
ubuntu,linux ...
ubuntu,linux recovery
memtest
memtest
windows7
windows7
ubuntu linux
ubuntu linux recover
i have an entry in grub that i don't use at all "Windows recovey " and i want to know if there is a way to remove it or just hide it i have an other problem is grub confuses some partitions names so is there a way to rename them
View 3 Replies View RelatedI have been fooling around with some of the new kernels and have ended up with a lot of options in my grub at boot. I have been checking this page:[URL].. ... and it appears hiding the entries in grub2 is not as easy as hashing them out (#) which was the convention in grub.
My problem: I have installed kernel 2.6.36 and 2.6.37 just to fool around. Neither works in anything but low-graphics as it seems the ATI graphics driver is not working in either yet. They both also kill my wireless (don't recognise the card). BUT I don't want to completely uninstall them as I'd like to keep playing around as time goes on and they develop. I'd like to just hide them from the menu.
Is there some easy way of doing this? The link I provide only gives options to make the kernel non-executable (overly complicated process) or remove the kernel completely, neither of which I want to do. This used to be simple in grub, open a file and add or remove a #, and - although overall I prefer grub2 - IMHO this 'improvement' seems a little like a backward step. Sure a million people will disagree, but .
I have been reading this but could not resolve my issue: [URL]. The problem is as follows. I got a samsung laptop and there is some kind of recovery utility installed. After installing Ubuntu I get too windows grub entries, one is called Windows Vista (loader) on /dev/sda1 and the other one is Windows 7 (loader) on /dev/sda2. The latter is correct and the first one is something that I'd rather not have active at all in the grub menu. Both of them are of course created by 30_os-prober in /etc/grub.d. I figured that I would most likely prefer a custom entry for Windows 7 and remove the x flag from 30_os-prober. I tried to create a file 50_windows7 in a described manner:
#! /bin/sh -e
echo "Adding Windows 43_custom" >&2
menuentry "Windows Vista 43_custom" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set 7cecddfbecddb01e
chainloader +1 }
Unfortunately during update-grub I get following:
Found linux image: /boot/vmlinuz-2.6.31-17-generic
Found initrd image: /boot/initrd.img-2.6.31-17-generic
Found linux image: /boot/vmlinuz-2.6.31-14-generic
Found initrd image: /boot/initrd.img-2.6.31-14-generic
Found Windows Vista (loader) on /dev/sda1
Found Windows 7 (loader) on /dev/sda2
Adding Windows 43_custom
/etc/grub.d/50_windows7: 4: menuentry: not found
I have a relatively stock OpenSuse 11.3 install with only the Packman and VLC additional repositories enabled. When I insert a DVD into the DVD drive, it shows up as TWO identical entries in the notifier applet and in Dolphin. I am unable to eject the DVD; as soon as it opens it immediately closes. Once the drive closes again,KNotify crashes with the following stack trace:Application: KNotify (knotify4), signal: Segmentation fault [Current thread is 1 (Thread 0x7f05cb8e1760 (LWP 4197))]
Thread 2 (Thread 0x7f05bc2ff710 (LWP 4198)):
#0 0x00007f05c8b686b3 in poll () from /lib64/libc.so.6
#1 0x00007f05c611ffd4 in ?? () from /usr/lib64/libglib-2.0.so.0
#2 0x00007f05c6120510 in g_main_context_iteration () from /usr/lib64/libglib-2.0.so.0
[code]....
When I originally installed Ubuntu 9.10 64 bit, I had the following operating systems already installed:
Kubuntu 9.04
Windows 7
Windows XP
Ubuntu automagically created a GRUB2 menu that offered all of these, plus of course itself, which was fine for a while.
Later on, I deleted and reformatted the partitions that had been dedicated to Kubuntu 9.04. GRUB2 has failed to keep up. Despite running "sudo update-grub" multiple times, the GRUB2 menu continues to show entries for Kubuntu 9.04.
How do I get rid of these obsolete entries? The partitions it was on simply do not exist any longer, so I don't know how GRUB2 is picking it up.
I had already edited my fstab file to reflect the new partitioning scheme, so I don't know where GRUB2 is getting the idea that I still have Kubuntu 9.04 installed.
As it stands right now, Grub2 seems to generate menu entries in this order (for my pc)
Ubuntu 2.6.32-22
Ubuntu 2.6.32-22 (recovery)
Ubuntu 2.6.32-21
Ubuntu 2.6.32-21 (recovery)
Windows XP
How can I make it so that Grub generates entries in this order
Ubuntu 2.6.32-22
Windows XP
Ubuntu 2.6.32-22 (recovery
Ubuntu 2.6.32-21
Ubuntu 2.6.32-21 (recovery)
If you're wondering why I care about the order, its because I just installed Grub with an icon based theme. In that situation, it looks silly to have 4 Ubuntu Icons next to each other, and then the windows one at the end.
i have been running Kubuntu 10.04 on my primary hard drive, and i have a second 1.5TB HD that i use for storage. so shrunk the secondary HD partition and created a second 50GB partition and i installed Ubuntu 10.10 on it and told it to rewrite the mbr on my primary HD. Where i am at: i took the menu entry from my Kubuntu "grub.cfg" and the entry from my Ubuntu "grub.cfg" and put them in the 40_custom file. so now when i boot-up my computer, it shows both installations at the bottom of Grub2s menu list. with all the menu entries that Grub automatically adds.
What i would like to know is how do i make it so that the Grub2 menu only shows the entries that i add to the 40_Custom file and not the randomly generated list aswell.
Is it possible to add menu entries for older kernels to boot instead of the latest?
I have tried this in Ubuntu 10.04 and it hasn't worked.
This used to be possible with ease in grub legacy.
I copied the current menu entry from /boot/grub/grub.cfg and pasted it in the /etc/grub.d/ 20_custom file.
Then I changed the kernel number to the older kernel number and the initrd number too. #update-grub puts this entry into 'grub.cfg', but it doesn't work.
I get:
The old kernel is in /boot as well as the respective initrd and config files.
I have window 7, Ubuntu and Cent Os installed in my system. I was actually trying to change boots options but unfortunatly i lost all boot entries. Is there anyway i can recover all three boot records.
View 7 Replies View RelatedI like to load other distro's via their own grub.
So at the min I add an entry to code...
however when update-grub2 is run it also adds its own entries (for arch linux).
Is there a way to stop the update-grub2 script automatically adding a entry on a specific partition ?
One hard drive (I'll call it hard drive 1 for the sake of this post) has windows xp and ubuntu on it. It dual boots fine and Grub is installed in the MBR. I physically removed that hard drive and installed a higher capacity hard drive (I'll call it hard drive 2). This hard drive (hard drive 2) is a dual boot (win xp and linux mint) and Grub is installed in the MBR. It works fine.
Here's what I want to do:
1. Make hard drive 1 the master drive, and hard drive 2 the slave drive. I know how to do this (hd pin settings, master drive on the end of the ide chain, etc).
2. Have a grub menu that allows me to boot any of the OS's from any of the hard drives. As such this grub menu should have 4 entries.
What I think I need to do is add two entries to hard drive one's Grub; 1 for window xp (on the slave drive) and one for linux mint (also on the slave drive). How do I do that? However, I wonder if there is a way to tell hard drive 1's grub to link to the grub on hard drive two - i.e. to make an entry show up that when selected would show hard drive 2's grub menu options. Is this possible?
I'll get directly to the point, I've installed Ubuntu, Linux on the same partition as Windows 7. Everything works just as it should be, no problems and I'm actually enjoying Ubuntu. It's a nice and clean OS.
Now, I'm having trouble with the GRUB, since I have updated Ubuntu a few times. It's not a large problem, but I don't like it around.
I attached a picture of my GRUB, it may take too many words to describe what's going on, so see for yourself.
after messing around with plymouth manager to try and get a decent boot screen(for the 3 weeks i've had 10.10 installed, it's just been a plain text bootup) it seemed to have removed my main boot option without recovery. i'm still able to boot into recovery and pull up my graphical environment but i can't seem to figure out how to get my normal boot option back.
View 9 Replies View RelatedRunning 9.04 Xubuntu desktop as server and development environment. I turn off gdm once booted up. When sshing in for other computer I ran htop, and found the following multiple processes:
[Code]....
Is there any good reason why I have multiples of these, or conversely is there a problem by having them? Everything works OK. Apache is only serving up my web development pages which I work on now and then, so its not having to handle external traffic. The server is port forwarded on port 80 through the router.
I know someone posted a sim. query back in 2008, but I'm know getting the same issue in Lucid. I installed the latest updates last night and when I rebooted I found I had what looks like multiple copies of the same kernel entry in the Menu.lst. I've included my file for review. Sorting this out. Otherwise I reckon Lucid is rock solid. I do tend to leave a lot of default entries in commented out. Will this make my boot slower at all?
titleUbuntu 10.04.1 LTS, kernel 2.6.32-24-generic
uuidc1e66bea-56ad-4e9b-84a3-5f54d36b63c2
kernel/boot/vmlinuz-2.6.32-24-generic root=UUID=c1e66bea-56ad-4e9b-84a3-5f54d36b63c2 ro quiet splash
initrd/boot/initrd.img-2.6.32-24-generic .....
Although all the passwords are under one Keyring folder, I have to type in the password 4 times. Is this the way the keyring is supposed to work? If so, can I help change this somehow(I'm not a programmer, unfortunately)? It seems that a lot of people have this problem and getting it to work out-of-the-box could bring in more potential users. (Also, different topic, is there anyway to make Dropbox wait until I enter keyring passwords to try to connect or wait until a connection is made to try to connect?
View 1 Replies View Related