I am able to start Encryption Key Manager manually, but have not been able to start EKM automatically. How would I get EKM to start following a BOOT? Below is my script ekmlaunch.
ekmserv@LINUXEKM:~/keymanager> pwd
/home/ekmserv/keymanager
ekmserv@LINUXEKM:~/keymanager> cat ekmlaunch
[code]....
Is there a CentOS equivalent of SLED/SLES?
View 2 Replies View RelatedHow do I check what driver my dvdrom is using in SLES11 the reason for this is I need to find that driver and compile it for SLES9.
View 5 Replies View RelatedI have a task I need to enable root telnet on SLES 11.I know about security hole, it is a must requirement accordingly to executing some scripts.Telnet works for the other user , but not for rootSSH work properly.Added pts/0 .. pts/24 to the /etc/securetty
View 5 Replies View RelatedI have installed SUSE SLES11.0 and when it boots up, the keyboard works, but the mouse does not. I am connected via a KVM, and the pointer does not move when I move the mouse.
I have run:
> init 3
> cat /dev/input/mice
> sax2 (after I got the mouse working)
But after the reboot, it no longer works within the gui.I have already searched for hours via google and tried many things to no avail
Anyone know how to remotely boot a server so that a network boot (F12) automatically starts? For example, in Solaris, I can type "reboot -- net -s" (hope i remembered the syntax - been a while! )to reboot my server and begin a network installation without having to be at the console. I am looking for the same in SLES.
View 1 Replies View RelatedI'm trying to install neon so that I can install SVN in order to try to install a Web Page Replay server.
When I run the command:
I get the following error:
I was able to install apr and apr-util and believe it also requires an XML parser so perhaps this is just an issue of pointing neon to the XML parser?
I installed SLES11 SP1 on my machine. It is available with kernel source in /usr/src/. I built another kernel with this source. New kernel image and initrd are available in /boot. But the newly build image is not getting booted up.
View 3 Replies View RelatedI installed SLES 11 SP1 jeOS on my system. It is booting up properly. But when I tried to boot it up with "TrustedGrub", it comes up up to login level. When I given the login name and password, it shows an error "Error in service module".Then i couldn't login.
View 1 Replies View RelatedUnable to run programs as su - (root) from command line. example: kfind or yast2error:cannot connect to X ServerAfter I exit as root, I am able to excute both commands successfully.I will not work as su -. Operating System: SLES 9 (using KDE).
View 2 Replies View RelatedI wonder if there is an easy way to accomplish the following: I made a tool and part of it needs to be compiled. It would be easy if I can automate compilation for multiple platforms (x86 / x86_64 / RHEL / SLES / Ubuntu). Is there a way to do this automated on a single host? Or should I set up an os for each distro? Also is there a way to generate RPM and deb files also on the same host without having to edit the meta files each time a version changes?
View 11 Replies View RelatedIm trying to download and install wine memory emulator through the command line. I have found a lot of information about it; just can get it done. I have found the repository on winehq; just not sure where to put it.
[URL]
if there is available SLES clone out there. Like Red Hat Enterprise Linux = CentOS?
View 1 Replies View RelatedI am looking for help connecting my mainframe Linux to the active directory world.
View 1 Replies View RelatedI'm trying to install OpenDX(dx)-4.2.0, a scientific graphics visualization tool on Suse Linux 10.1 . But its giving following error:
icc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -Dlinux -I/opt/intel/MESA/7.5.2/DRI2PROTO/include/X11/extensions -I/usr/X11R6/include -g -O2 -I/usr/X11R6/include -D_GNU_SOURCE -c callm_xinit.c
callm_xinit.c catastrophic error: could not open source file "Xm/Xm.h"
[Code]....
To resolve this error, I tried to install Mesa OpenGL libraries (mesa-7.5.2). But its not getting installed even after resolving dependencies such as libdrm, dri2proto, libpthread-stubs.
Are there any rpm distributions available for mesa libraries on Suse?
I have setup an static IP on this server, it will ping internal sites , but when I try to browse the internet it does not do anything. I have set up the gateway, the firewall, and the domain fie, but still no luck.NOTE: When I try DHCP it will work ( it will resolve the DNS of the pages), but since this is a server it requires an static IP.
View 2 Replies View RelatedI have a sles 10 server that I need an iseries 5 client to make an sftp connection to. I'm getting the following error in the /var/logs/message log:
[Code]...
On SLES 9 have clamav 0.96.5. Does exist new version 0.97 for that system?
View 4 Replies View RelatedI'm having some trouble installing SLES using "live installer" during the install process I get an error installing grub:
Error 15: File not found.
I also tried dd to the drive (as I have done many times with opensuse) but I could not boot to the drive. I wanted to use SLES so that I could purchase support in the future if needed. The supportability report showed that all the packages were supported.
I have modified /etc/sudoers using visudo command to give the user "runner" to give all access without password.capture of sudoers file
# User privilege specification
root ALL=(ALL) NOPASSWD: ALL
runner ALL=(ALL) NOPASSWD: ALL
But still the "runner" is getting permission denied error when trying to open files with "(-rw-------)" permission in/shutdown
Attempts to do a mount -t nfs4 servername:/share /mnt hang. Performing an strace of the mount shows that the mount command is attempting to find /sbin/mount.nfs4 The nfs server, client, and util packages are installled. Did ps -ef | grep idmapd; ps -ef | grep gssd to check client side daemons and things look good. Not using gssd right now tho. Just want to get the thing to mount. Firewalls are not running. Doing a showmount -e servername reports the shares as being offered. I can mount it using nfs v3 protocol.
View 8 Replies View RelatedI am running Apache2 on Novell SLES 11. I am using Virtual Hosting for two sites. One site only has a single domain whereas the other site has two domains registered. surrounding my one virtual host with the two domains. I want anyone that point to [URL] gets redirected to [URL]. I am trying to do this for trending but not 100% on how to go about doing this. I've read about mod_rewrite but most of the information I've read about is about a single site running on Apache and not much around Virtual Hosting within Apache. I am currently using Server Alias within my vhost.conf file which allows either [URL] or [URL] to see the site but I really want to redirect [URL] to [URL].
View 12 Replies View RelatedI've just rebuilt a server that had SLES10 to Slackware64 13.0. I wanted to keep all users and their passwords, so I copied all user entries in the old SLES /etc/passwd and /etc/shadow files to the corresponding new Slackware files. It turns out that the passwords are not interpreted correctly. I presume that SLES uses a different hashing function than slackware. Is there an easy way to convert these hashes, or will I have to reset all passwords and force users to change at login?
View 3 Replies View RelatedI am installing SLES on a new server with raid 05, after I went with the setup it copies all the files until It gets to install grub. It gets me an error message installing grub and it wont let me move forward.
[code]...
We found a link to binutils-32bit-2.18.90.20080912-1.5.ppc64.rpm in software.opensuse.org: Search Results but the page states that the object is not found. We had the same problem with these packages: compat-32bit-2008.8.13-1.10.ppc64.rpm and linux32-1.0-414.13.ppc.rpm.
View 2 Replies View RelatedI've installed SLES 11 SP1 as a VM on my Hyper-V/Win2008R2, HP DL380G6 QuadCore, total 18GB RAM, 4GB assigned to the VM. The installation does not include a gui and everything works as expected. The hv-modules are visible but the systems freezes while I
- backup the system with Symantec BackupExec 2010/RALUS
- run an rsync from my physical P DL360G5
I have to powercyle the VM to reestablish a connection i.e. to CUPS by browser or to open a new session by ssh. Why SLES crashes on hyper-V or what I can do here?
I am looking a creating a custom live CD so that I can use the apps that I need an take it around with me. However I can extract everything but I don't know how to put it back together.
This is what I did code...
I just build a couple production SLES 11 machines and I'm using an ssh client to connect. However the ssh client forces me to use keyboard interactive login. How can I turn this off so I can use the normal username / password?
View 1 Replies View RelatedI Can't install SLES 9 SP3 (Novell OES SP2) on HP ProLiant DL 320 G5p
SATA 82801GR controller
LSI Logic SAS1068 Fusion-MPT PCI-X
HP 8 Internal Port SAS HBA with RAID
SATA CD-Rom TEAC DV-W28S-RS
INTEL e1000 2 port NIC
It seems no CD-Rom was found by SLES as well as no NIC was found. So I can't start install nor using CD or LAN. I started booting from OES SP2 CD 1. The boot loader started normally, but when I chose Installation it says Could Not Find the SLES 9 Installation CD. Activating Manual Installation.
Here in the manual installation screen I check System Information - Hard Disks and CD-Roms It says No Hard Disks or CD-Rom drives have been detected so far Then
1. I erased the BIOS/HD through RBSU
2. downlaod Driver Diskette for HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) for SUSE LINUX Enterprise Server 9 (x86)
3. startfed installation again.
Now I can see in the manual installation screen - System Information - Hard Disks and CD-Roms MY RAID 1 ARRAY 278GB, but still NO CD-ROM, NO NICS at ALL. Also I have recently updated all firmware, tried changing CD/DVD-Rom adding ordinary SATA HDD, and the result is the same - no CD, no HDD is seen. So I suppose the linux kernel doesn't support my motherboard SATA channels? Additionally, I tried to install SLES 10 SP3 (OES2) and it was success, all the hardware were detected including CD and NICs How can I add driver prior to installation or install using my array HDD?
It seems that every time there is vmware client update a couple of my Linux servers always reboot and get stuck at booting up because linux can not start a drive. I end up having to boot off the server did, run install and then run a auto repair to get it to boot up. I tried narrowing the repair to just the file systems but that did not seem to fix it, it has to be a autorepair. So I am thinking that with the vmware client there must be some virtualized hardware address that has changed with the updated client but I am not sure how to check what it is when I get dumped out to what looks like run-level 3 command prompt
View 1 Replies View Related