I'm having some trouble installing SLES using "live installer" during the install process I get an error installing grub:
Error 15: File not found.
I also tried dd to the drive (as I have done many times with opensuse) but I could not boot to the drive. I wanted to use SLES so that I could purchase support in the future if needed. The supportability report showed that all the packages were supported.
I am attempting to use SuseStudio "preload" and "live" .iso images and the instructions at SDB:Live USB stick - openSUSE to create a bootable USB drive.dd_rescue ends after the expected amount of time--without reporting errors--yet "fdisk -l" reports that the device does not contain a valid partition table. The USB key does not boot and appears to have no data.
For what it's worth, my build host is Gentoo on 2.6.39, and I have the latest dd-rescue available. The USB disk is a PNY attache 4GB and works fine with any ISO's supported by unetbootin. The only other bare metal I have here is a netbook running Mepix, so I can't make use of solutions that start with "Boot your existing OpenSuse workstation
I have modified /etc/sudoers using visudo command to give the user "runner" to give all access without password.capture of sudoers file
# User privilege specification
root ALL=(ALL) NOPASSWD: ALL
runner ALL=(ALL) NOPASSWD: ALL
But still the "runner" is getting permission denied error when trying to open files with "(-rw-------)" permission in/shutdown
I am looking a creating a custom live CD so that I can use the apps that I need an take it around with me. However I can extract everything but I don't know how to put it back together.
This is what I did code...
I have just created an 11.3 64 bit image using susestudio. All seems well but would like to customize the desktop via my script that I have added. My question is how do I remove the home directory and the trash icon from the desktop? Or better said what is the path to removing the symbolic link, I cannot find the symbolic links in the desktop directory. It is empty, I do not see any symbolic links under /home/test/Desktop?
View 3 Replies View RelatedI'm trying to install OpenDX(dx)-4.2.0, a scientific graphics visualization tool on Suse Linux 10.1 . But its giving following error:
icc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -Dlinux -I/opt/intel/MESA/7.5.2/DRI2PROTO/include/X11/extensions -I/usr/X11R6/include -g -O2 -I/usr/X11R6/include -D_GNU_SOURCE -c callm_xinit.c
callm_xinit.c catastrophic error: could not open source file "Xm/Xm.h"
[Code]....
To resolve this error, I tried to install Mesa OpenGL libraries (mesa-7.5.2). But its not getting installed even after resolving dependencies such as libdrm, dri2proto, libpthread-stubs.
Are there any rpm distributions available for mesa libraries on Suse?
I have a sles 10 server that I need an iseries 5 client to make an sftp connection to. I'm getting the following error in the /var/logs/message log:
[Code]...
On SLES 9 have clamav 0.96.5. Does exist new version 0.97 for that system?
View 4 Replies View RelatedWe found a link to binutils-32bit-2.18.90.20080912-1.5.ppc64.rpm in software.opensuse.org: Search Results but the page states that the object is not found. We had the same problem with these packages: compat-32bit-2008.8.13-1.10.ppc64.rpm and linux32-1.0-414.13.ppc.rpm.
View 2 Replies View RelatedI've installed SLES 11 SP1 as a VM on my Hyper-V/Win2008R2, HP DL380G6 QuadCore, total 18GB RAM, 4GB assigned to the VM. The installation does not include a gui and everything works as expected. The hv-modules are visible but the systems freezes while I
- backup the system with Symantec BackupExec 2010/RALUS
- run an rsync from my physical P DL360G5
I have to powercyle the VM to reestablish a connection i.e. to CUPS by browser or to open a new session by ssh. Why SLES crashes on hyper-V or what I can do here?
I Can't install SLES 9 SP3 (Novell OES SP2) on HP ProLiant DL 320 G5p
SATA 82801GR controller
LSI Logic SAS1068 Fusion-MPT PCI-X
HP 8 Internal Port SAS HBA with RAID
SATA CD-Rom TEAC DV-W28S-RS
INTEL e1000 2 port NIC
It seems no CD-Rom was found by SLES as well as no NIC was found. So I can't start install nor using CD or LAN. I started booting from OES SP2 CD 1. The boot loader started normally, but when I chose Installation it says Could Not Find the SLES 9 Installation CD. Activating Manual Installation.
Here in the manual installation screen I check System Information - Hard Disks and CD-Roms It says No Hard Disks or CD-Rom drives have been detected so far Then
1. I erased the BIOS/HD through RBSU
2. downlaod Driver Diskette for HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) for SUSE LINUX Enterprise Server 9 (x86)
3. startfed installation again.
Now I can see in the manual installation screen - System Information - Hard Disks and CD-Roms MY RAID 1 ARRAY 278GB, but still NO CD-ROM, NO NICS at ALL. Also I have recently updated all firmware, tried changing CD/DVD-Rom adding ordinary SATA HDD, and the result is the same - no CD, no HDD is seen. So I suppose the linux kernel doesn't support my motherboard SATA channels? Additionally, I tried to install SLES 10 SP3 (OES2) and it was success, all the hardware were detected including CD and NICs How can I add driver prior to installation or install using my array HDD?
Im trying to download and install wine memory emulator through the command line. I have found a lot of information about it; just can get it done. I have found the repository on winehq; just not sure where to put it.
[URL]
I installed SLES 10.2 with SAMBA 3.5.5.43 to retire our old Microsoft Windows 2000 Server and save some money. All was fine until last week when our chief asked to me to set password expiration for all clients. This morning, all users cannot logon because, when they logon, windows asks to change password and then it gives error error "Access Denied".
[code]...
i have acre M670G and am use red hat 5.3 i need to install Ethernet built in by use 64kb architecture but it doesn't work but it work with 32kb architecture . i need it by use 64kb architecture
View 1 Replies View RelatedCan we get this built into the distribution? This would really set it apart from other distributions that don't have this included. And it would most likely make a lot of PHP developer lives a bit easier.
View 7 Replies View RelatedSince some days a try to activate my web cam in a Sony VAIO VGN-FZ21Z. I had no success in openSUSE 11.3, neither Gnome nor KDE, neither 32 bit nor 64 bit. (It works in VISTA, not in Fedora and not in Mint).
Code:
alfredo@linux-7zs0:~> lsusb
Bus 001 Device 002: ID 05ca:183b Ricoh Co., Ltd Visual Communication Camera VGP-VCC8 [R5U870]
Kopete: no web cam.
Linux UVC drivers: -; Gspca: -; Microdia: -.
Searching for "R5U870": links lead to old sites or ERROR.
I have on my Asus x59sl laptop webcam with built-in webcam. Here is the lsusb output:
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 001 Device 005: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code].....
There is no audio output to the speakers when listening to, or while recording from Line-in. Enabling software sound playthrough in Audacity did not help. Audacity simply froze. But I can make fine recordings from Line-in and play the recorded files. Also no sound from cd-audio. KsCD begins playback, but no sound. Only VLC works with cd-audio. Maybe some slider settings that I missed? This is what I did so far: Advanced Linux Sound Architecture Driver Version 1.0.20
00-00: CMI9880 : CMI9880 : playback 1 : capture 2
00-01: CMI9880 Digital : CMI9880 Digital : playback 1 : capture 1│
louis@linux-6ozx:~> cat /proc/asound/modules
[code]....
According to [URL], gcc 4.3 supports atomic built-in function "GCC can now use load-linked, store-conditional and sync instructions to implement atomic built-in functions such as __sync_fetch_and_add" However, I am still using gcc 3.4 on my Redhat EL4. How do I get this built-in function installed?
View 2 Replies View Relatedi tried to install wine in SLED11 but i got this error : configure: error: X development files not found. Wine will be built without X support, which probably isn't what you want.You will need to install development packages of Xlib/Xfree86 at the very least. Use the --without-x option if you really want this.
View 8 Replies View RelatedNew eeePC 1015PEM netbook, 2GB RAM, 250GB HDD. Came with Win 7 Starter; I retained this and installed openSUSE 11.3 alongside. Everything works well in Win 7 Most things also work well in oS 11.3, but there is a knotty problem with audio from the built-in speakers. Headphones are OK, but the speakers don't work reliably. Others have reported this on similar machines, and a number of "fixes" have been proposed in a wide range of forums, but so far I haven't found any that work.
I've actually installed oS 11.3 twice. After the first install I had no speaker sound at all, but after a day or two fiddling around it started to work of its own accord for no reason I could point to. For unrelated reasons (a silly mistake by me in Win 7) I then had to re-install oS 11.3 from scratch. This time the speaker sound worked after install, but then it dropped out again a couple of days later. Headphone audio has remained OK throughout.
I'm aware of and have applied the acpi_osi=Linux kernel parameter to enable the Fn keys on the machine (including sound volume and mute/unmute), so it's not that. I've combed the forums and Google extensively for other suggestions, and have tried them - including installing alsamixergui. I've also installed a properly matched ALSA KMP which changed some of the alsamixer controls but didn't cure the problem. Since it all works very well in Win7 and works sometimes in oS 11.3, I conclude that the problem is not with hardware but is something in software.
I am trying to switch from the video device built into the mother board, to a card i just put into my machine. I'm using gnome and don't know where to start. I shouldn't need new drivers (based on a possible misunderstanding) because I am going from a nvidia 6100 to a 8600. I have looked in various places like the control center but haven't had any luck. I just started using linux and have very little experience in the terminal. Issues with the current card are stopping me in my learning process.
View 9 Replies View RelatedI have setup an static IP on this server, it will ping internal sites , but when I try to browse the internet it does not do anything. I have set up the gateway, the firewall, and the domain fie, but still no luck.NOTE: When I try DHCP it will work ( it will resolve the DNS of the pages), but since this is a server it requires an static IP.
View 2 Replies View RelatedI am able to start Encryption Key Manager manually, but have not been able to start EKM automatically. How would I get EKM to start following a BOOT? Below is my script ekmlaunch.
ekmserv@LINUXEKM:~/keymanager> pwd
/home/ekmserv/keymanager
ekmserv@LINUXEKM:~/keymanager> cat ekmlaunch
[code]....
Attempts to do a mount -t nfs4 servername:/share /mnt hang. Performing an strace of the mount shows that the mount command is attempting to find /sbin/mount.nfs4 The nfs server, client, and util packages are installled. Did ps -ef | grep idmapd; ps -ef | grep gssd to check client side daemons and things look good. Not using gssd right now tho. Just want to get the thing to mount. Firewalls are not running. Doing a showmount -e servername reports the shares as being offered. I can mount it using nfs v3 protocol.
View 8 Replies View RelatedIs there a CentOS equivalent of SLED/SLES?
View 2 Replies View RelatedHow do I check what driver my dvdrom is using in SLES11 the reason for this is I need to find that driver and compile it for SLES9.
View 5 Replies View RelatedI have a task I need to enable root telnet on SLES 11.I know about security hole, it is a must requirement accordingly to executing some scripts.Telnet works for the other user , but not for rootSSH work properly.Added pts/0 .. pts/24 to the /etc/securetty
View 5 Replies View RelatedI have installed SUSE SLES11.0 and when it boots up, the keyboard works, but the mouse does not. I am connected via a KVM, and the pointer does not move when I move the mouse.
I have run:
> init 3
> cat /dev/input/mice
> sax2 (after I got the mouse working)
But after the reboot, it no longer works within the gui.I have already searched for hours via google and tried many things to no avail
I am running Apache2 on Novell SLES 11. I am using Virtual Hosting for two sites. One site only has a single domain whereas the other site has two domains registered. surrounding my one virtual host with the two domains. I want anyone that point to [URL] gets redirected to [URL]. I am trying to do this for trending but not 100% on how to go about doing this. I've read about mod_rewrite but most of the information I've read about is about a single site running on Apache and not much around Virtual Hosting within Apache. I am currently using Server Alias within my vhost.conf file which allows either [URL] or [URL] to see the site but I really want to redirect [URL] to [URL].
View 12 Replies View Related