General :: Removing Linux And Installing XP
Oct 31, 2010
I've tried ubuntu, and could never get my sound working with that, so I tried fedora and had the exact same problem there. After a few days of trying to figure it out I decided to give up because it was really getting ridiculous, and I just want to go back to windows where things simply work.
Now the problem is that when I boot from the windows XP install disc, it doesnt recognise anything on my harddrive and just gives me the blue screen when I press any key (after showing me the list of partitions on my harddrive, all of which are <UNKNOWN>). I'm not sure what the problem is but it must be something to do with the fact that I have linux installed, so is there any way I can completely remove Fedora and just start fresh with XP?The only 2 options that the XP install disc gives me are 1) Install windows XP (I get blue screen), or 2) Recover windows XP installation (I dont have xp installed anyway).
Likewise, booting from my Fedora install disc only gives me the options of installing or rescuing Fedora, but not the option of removing it.
View 3 Replies
ADVERTISEMENT
Feb 13, 2011
I like to install Redhat linux 7.2 but want completely remove window xp. How to do the partition since there is only one hard disk on the PC?
View 3 Replies
View Related
Apr 24, 2011
Other than the linux kernel image I am using is it ok to remove the others I have and thus gain more disk space ? I only have a small asus 900 netbook.
View 4 Replies
View Related
Mar 27, 2010
Is there a way to install and run i386 software packages inside an AMD64 version of Xubuntu (v9.10)? Just to get an idea, how much effort would it require to port it to something usable within the said OS. I imagine it would be a lot.
View 2 Replies
View Related
Mar 21, 2011
I have an older laptop (hp pavilion dv1000), specs are:
Intel Pentium M 1.5 GHz
512mb RAM
60gb HD
Before attempting the below, I had XP installed on it, and it ran without issues, other than being a little slow.I'm looking to install a linux distro, but I've had a ridiculous amount of issues so far. Currently, there isn't anything installed on the machine. I've tried (booting via cd iso's):
1. Ubuntu 10.04.2-desktop-i386: Got to splash screen, then black screen. Never got to iso boot menu.
2. XUbuntu-10.04.2-desktop-i386: Got to splash screen, then boot menu. Chose the install option, and it went to a black screen. Nothing else happened.
3. openSUSE-11.4-KDE-LiveCD-i686: Installed all the way, except the graphics didn't behave correctly, the whole thing was glitchy and problematic, I decided to move on.
4. XUbuntu-10.04.2-alternate-i386: After a seemingly perfect installation, upon reboot I get this...
"The disk drive is not ready yet /dev/mapper/crystswap is not ready yet or not present", then gives me the option to wait or do a recovery. I tried waiting, it boots to a black screen. I tried the recovery, and now it doesn't boot at all.
Anyone have any good recommendations for a linux distro that should work out of the box with this laptop? I'd like to install NetBeans, firefox, and etc, so nothing too basic. Just something that will run quickly given my specs.
View 7 Replies
View Related
Aug 25, 2010
Can you all please help me with,
1) How to install any new software/application on Red Hat Linux?
2) How to run any new installed application in system start up/boot process as what we do with 'chkconfig service on' with a daemon?
3) Where to entry for a new installed application i.e. is there any specific file/directory?
View 5 Replies
View Related
Jun 14, 2011
What determines whether I should enable ipv6 when installing Linux? so not sure whether it depends on my ISP, my hardware (network card or modem or router), my Linux kernel, my CentOS version (5.6), my requirements, etc.
So I'm not sure whether or not I should enable it. And if I were to, in the CentOS installation screen would I select 'Automatic neighbor discovery' or 'Dynamic IP configuration' or 'Manual configuration'?
View 1 Replies
View Related
Oct 9, 2009
I have an old linux partition (fedora 10) that used to start from the MBR. Now I've installed windows 7 on a new drive (overwritning the MBR, autostarting windows). Is there a neat program availible that somehow enables me to choose to boot back into linux?
View 2 Replies
View Related
Jun 19, 2010
I have a duo core HP machine with two (2) physical hard drives.Drive C has the win Vista Media center version installed.The second drive has 2 partitions of 500gb each.One has all my windows data files on it and the second partition I have reserverd for the installation of Linux.How to install Linux on the second partition (SDB1) without loosing the ability to use windows when i need.In other words i want to establish a dual boot system and not disturb the existing windows installation by installing Linux and then be able to boot into a dual boot system that will let me select which OS to boot to.
View 3 Replies
View Related
Sep 13, 2009
I hav successfully installed RHEL5.1 on my system. I downloaded flash player from Adobe website. I chose RPM from the download type. Now, I can find an icon on my GUI for the flash player. When I right-click the icon and click on "Open with software installer", I was able to install flash player. Even the system showed that the software has been installed. But still when I issue the command rpm -qi flash the output says that flash is not installed.
Is there any correct way to install the rpm package. I even tried to install using rpm -ivh <flash player pkg name> even that did'nt work... I have another query... where does the package gets installed when I download RPM's or any other software from the internet.. I want to know the path where the pkgs will be sotred...
View 3 Replies
View Related
Aug 9, 2011
Until some time ago I had a dual Windows 7 and Fedora operating system, then I completely moved to Fedora. Recently I have become interested in Scientific Linux and wanted to install it besides my Fedora. I took a back up of all my data and formatted my HDD for a clean install of both of them. This is what I did:
First I installed Scientific Linux with these partitions (contents of /etc/fstab):
[Code]...
Then I went on to install Fedora 15; I kept the same primary and extended partitions but only changed the names of "/FedoraRoot" to "/" and "/" to "/SLRoot" in the above list while installing Fedora. I also chose the boot directory of Fedora to be /dev/sda1/ which I wanted to be the /boot file for both systems while I had chosen the boot file for Scientific Linux to be "/dev/sda".
Everything went well until the final step of copying the files an error came that some of files that Fedora wanted to install in /usr/share, /usr/lib64, /usr/bin, /etc/system..., /etc/issue..., /etc/redhat-release... and /etc/rpm are already present in the Scientific Linux format and so there is a conflict and it has to terminate!!! I must have made some strange mistakes in the definitions
View 2 Replies
View Related
Dec 21, 2009
if anyone of you have shifted using Paid Red Hat Linux with CentOS, and what are your experiences of moving from Paid Linux to Unpaid Linux CenOS. When do you suggest a person use Paid Linux and when to use Unpaid Linux?
View 1 Replies
View Related
May 5, 2010
i would just like to verify that the command
lspci would show the FC adapter installed
is there any other command that i can use to verify the FC adapter is being installed
View 4 Replies
View Related
Feb 12, 2010
I want to Migrate my C++ Application from SuSE Linux to Red Hat Linux.What impact analysis i should do?
View 3 Replies
View Related
Jul 30, 2011
I have Fedora 15 KDE system i like to migrate to GNOME3. I need to know the command to remove KDE and install GNOME3
View 4 Replies
View Related
Feb 21, 2011
So I decided to try KDe, because why not? They have Kookies.[URL]However Terminal gave me an error, saying dependencies about odbcinst1debian2, saying that it depends on odbcinst but is not going to be insalled. So I went into Synaptic and manually removed these, then did the long command.Things got removed, reboot.Now Plymouth boots, but it stops at five orange dots (not moving) and then nothing. No login menu. I held down the power button and rebooted three times, all stuck at Plymouth.Yeah I can reinstall Ubuntu, I have the disk, but there are many configs that I did, that I do not remember.
View 9 Replies
View Related
Mar 17, 2010
how to share a folder from linux to linux systems and setting password to open that folder
View 14 Replies
View Related
Jun 19, 2011
I'm planning to replace kde with gnome so my plan is to visit Yast pattern view check Gnome Desktopand Gnome Base System then unchecking Kde4 Desktop and Kde base system.i'm seeking stability I know openSUSE has it but no with kde.is this the right way to replace my desktop environment , I will not download the gnome iso and make a new installation
View 4 Replies
View Related
Jun 15, 2010
I've decided to get rid of ubuntu since I can't get my 5.1 system to work. So here is the drill :
*I have an Ubuntu installed
*I also have a flash and an iso image of windows XP
how do I remove Ubuntu and then install windows xp.I also want to divide my drive into C and D if possible .
View 9 Replies
View Related
Jan 15, 2011
I apologize in advance if I'm posting this in the wrong forum;but I've been hacking away at this for awhile and am afraid I can't solve it.I tried to install Ruby 1.9 this morning, the install was going well until this appeared in the terminal and was stuck:
View 9 Replies
View Related
Oct 5, 2010
I have a problem installing the arm-linux-gcc in arm mini2440. The steps that follow are: Unzip the file with the following order: # Tar xfzv arm-linux-gcc-4.3.2.tgz-C /Included in the PATH HOST development tools:# Export PATH = / usr/local/arm/4.3.2/bin: $ PATH # Arm-linux-gcc-o hello hello.c And I get the following error:"/ Usr/local/arm/4.3.2/bin/arm-linux-gcc: line 1: syntax error:"("unexpected"
View 1 Replies
View Related
Apr 13, 2011
Is it possible to install a different windows manager?Currently I am using a HP Netbook 210. The windows manager I am using is gnome-shell that comes as default with Fedora 15. However, I am wondering if I could completely remove this and install a different windows manager. For example I would like to try the xfce 4.8.
I am not talking about completely removing Fedora 15 and then installing Fedora 15 xfce spin. Just the window manager.How easy would it be to remove gnome-shell windows manager and then install xfce 4.8 windows manager?
View 1 Replies
View Related
Jun 1, 2011
I have an issue with packages. When I try to install any package then I receive error like this one below.
e.g. install Lynx:
Code:
# apt-get -f install lynx
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libperl5.10: Depends: perl-base (= 5.10.0-19lenny3) but 5.10.0-19lenny2 is to be installed
libsnmp15: Depends: libsnmp-base (>= 5.4.1~dfsg-12) but it is not going to be installed
lynx: Depends: lynx-cur (>= 2.8.7dev9-2.1) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
So I decided to remove libperl5.10 which apparently mess. But its not that easy, just take a look:
Code:
# apt-get --purge remove libperl5.10
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libsnmp15: Depends: libsnmp-base (>= 5.4.1~dfsg-12) but it is not going to be installed
Depends: libperl5.10 (>= 5.10.0) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
...and now I don't know what to do ?
View 13 Replies
View Related
May 21, 2009
I am using OpenSUSE 11 on my Intel Dual core. But, now i want to move to Centos5 and planing to remove SUSE and installing Centos5. But to be frank, i don't have any source to take the backup of my data. So, can i install only CentOS by removing SUSE without any data lose. Any procedure? If yes, then let me know the step by step guide so that i can go with Centos ASAP.
View 3 Replies
View Related
Jan 29, 2011
Durring attempts to install Haguichi, Terminal says "Version of libmono-system2.0-cil on system is 1.9.1+dfsg-6." I have used "sudo apt-get -i libmono-system2.0-cil" only to be told during that install that I "have the latest version alread installed." Do I need to uninstall 1.9.1+dfsg-6 ?
View 4 Replies
View Related
Sep 6, 2010
Currently I am installing oracle 10g release 2 with Red hat Linux 4.I am getting the following error.
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'. In forum I saw this kind of post and I did all the steps, then also getting the error.
View 1 Replies
View Related
Mar 22, 2010
I have installed windows xp (service pack 2) on my pc. later i formatted a partition (drive E and installed ubuntu linux 8.04. I have provided 2gb space for SWAP partition and remaining for root (/).I have done this manually. Installation was completed, and ubuntu asked me to reboot the system. I did so.
Now comes my problem. I am getting some DHCP connection or some thing weird. after that i am getting a message ......and with a message asking me to press any key. the same thing is coming even after restarting the system....i am unable to see both windows and linux now!
View 5 Replies
View Related
Aug 30, 2015
So I can't install Firefox, because it conflicts with Iceweasel, but it appears that uninstalling Iceweasel uninstalls GNOME (gnome & gnome-core).Is there any way around this? Perhaps telling apt that Firefox is an alternate to Iceweasel?
View 3 Replies
View Related
Feb 18, 2011
I want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.
View 2 Replies
View Related
Aug 22, 2010
i'm having trouble with my fresh ubuntu installation (netbook edition). what i did was install xubuntu-desktop on top of that (wanted to check it out)..........didn't really work for me, so i removed it, hoping this would also remove the xubuntu desktop logon screen, which i didn't like. since this wasn't the case, i went to synaptics and removed all and everything with xubuntu in the title. NOTE: in the same session i turned off password requests for login - it could also matter, but i'm not sure, so i thought i'd mention it. the end result: three warning messages at logon
- Could not update ICEauthority file /home/dsikl/.ICEauthority
- There is a problem with the configuration server. (/usr/lib/bgconf2-4/gconf-sanity-check-2 exited with status 256)
- Nautilus could not create the following required folders: /home/dsikl/Desktop, /home/dsikl/.nautilus. Before running Nautilus, please create these folders, or set permissions such that Nautilus can create them.
i don't have access to my programs, administrator tools, /home folder, nothing.........the only thing that appears is the right part of the top bar (network, clock etc.), but also completely different.......it doesn't have my WLAN data anymore (can't access it), and all i have managed to get started was (accidentally) terminal with Ctrl-Alt-T, and from there I can use sudo, or even start nautilus, but can't access my own user, no matter what.........in the end i somehow managed to get to the point where it requested my passphrase, which i wanted to print out a day before it happened, but didn't and the screenshot is unfortunately within my /home folder. i tried reinstalling xubuntu-desktop, even ubuntu-desktop, i repaired broken packages from the recovery mode, tried everything i could to get the bugger going again, no success yet.
i would be happy to do a clean install, but there's one spreadsheet in the documents folder which i desperately need and i really need to get a hold of it before formating. could some sort of a rescue livecd help? i just need that one file. the easiest would be if i could somehow repair whatever packages may be broken, or manually (with apt-get or similar) reinstall the additional xubuntu packages i manually removed via synaptics, but i wouldn't have a clue what those were
View 3 Replies
View Related
