Is there any way to record kernel menuconfig screens? I would like to have a record of the configuration as it looks to the menuconfig screen user, with each successive sub-menu indented. Copy and paste gets the data but the frame/box drawing characters are messy. Here's the first menu:
[code]...
I'm experimenting with 2.6.33-ck1 mainly because I want to try the BFS. I successfully configured and installed the patched kernel, but I'm experiencing various problems on the desktop. The biggest is Chromium not working at all, but there are several others, including graphical glitches in firefox. I'm sure I left some important module off or made a mistake for some settings My question is that is there a 2.6.33-fc12 kernel yet, and does it have a .config available? I'd like to load those settings in menuconfig and use them as a starting point to properly configure and complie a -ck patched kernel.
View 1 Replies View RelatedI am looking for information to insert kernel module into kernel. I am not looking at dynamically insert of kernel module using insmod, modprobe etc. I am looking for statically insertion of kernel module procedure, such as what to change on makefile, what to change on menuconfig, what to change on .config file, etc.
View 2 Replies View RelatedI'm simply trying to compile a vanilla kernel from Kernel.org, I've done it before, however "make menuconfig" returns an error after I've made my changes to the config file.
Code:
Why is make returning that error? I am using a 64-bit kernel.
there was something like <board name> and deconfig or something so that make menuconfig can be configured.
View 1 Replies View Related[code]...
why is this? make menuconfig giving error
I am interested in kernel configuration and compilation, so I have executed ltib and menuconfig, but I am not sure to understand what is the difference between Linux Target Image Builder and the Menuconfig tool? Is menuconfig used by or included in ltib? I understand that both tools generate a kernel, But I guess ltib can process "something more"? (packages/target selection? )
View 2 Replies View RelatedI can't seem to get a screen on my Asus Netbook 1005pe. I did install the xf86-video-intel-2.10.0-i486-1.txz & kubdrn-2.4.17-i486-1.txz.I'm also having a Kernel Modesetting issue. Below is my Xorg.conf file & my Xorg.0.log file. Sorry if I am not explaining myself correctly.
View 14 Replies View RelatedI need to modify fs/open.c and fs/read_write.c to make my modifications. I cannot find any options in 'make menuconfig' to make these files modules rather than compiled elements. I'm thinking these cannot be modules because the file system won't work without open.c and read_write.c. Is this correct - I cannot compile fs/open.c and fs/read_write.c as modules, only as compiled elements? Or, is there some way for a module to overwrite these routines when the module is installed and re-enable the routines when the module is removed?
View 3 Replies View RelatedI'm using SecureCRT on a Windows host to connect to Ubuntu 10.04 using the default VT100 setting, and having a problem working with Ncurses (ie. output from "make menuconfig":[URL]...
- The screen is difficult to read/navigate
- Neither ESC nor F12 work so I can exit menuconfig
how to solve this issue?
Trying to build a driver for a TV tuner card. When I enter 'make menuconfig', I get this error:
make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64'
/lib/modules/2.6.32-5-amd64/source/scripts/Makefile.build:44: /lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile: No such file or directory
make[3]: *** No rule to make target `/lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile'. Stop.
make[2]: *** [scripts_basic] Error 2
Suspect I need another package in addition to linux-headers.
Running Squeeze, amd64, KDE.
Trying to tweak my boot-up time. I changed the FRAMEBUFFER (/etc/initramfs-tools/conf.d/splash) from "n" to "y". But it actually increased my boot time- as I now get two plymouth splash screens (one, followed by a brief black screen, then another Plymouth splash)
Changing the FRAMEBUFFER back to "n" results in NO splash screen.
How do I get back to just having one splash screen (as opposed to two or none)????
Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:
Code:
make menuconfig
*** Unable to find the ncurses libraries or the
[code]...
I am having trouble upgrading my broadcom drivers ( bnx2 ) for some reason i can't switch Broadcom NetxtremeII support from "built in " to module in menuconfig. can someone show me why this is the case?
[code]...
also i do have loadable module support enabled[*] Enable loadable module support
When configuring a custom kernel using fedoraproject.org instructions, the make menuconfig options for LIRC are not in the .config file anywhere. I checked the kernel tree and all the files are there in the .../drivers/input/lirc subdirectory (I need the lirc_dev and lirc_i2c drivers). I reset the .config to its original settings to make sure I didn't mess up. I also grep'ed the .config file for any LIRC related settings, none found. Also I'm not getting any sound from the radio-aztech driver.
View 1 Replies View RelatedI've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine).
Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?
OS Linux Mint 10, Intel graphics, SIS usb2vga adaptor.
I have three screens. The netbook screen with the extended desktop onto a vga screen and a third screen connected to a usb2vga adaptor.
The extended desktop screens without the usb2vga adaptor works perfectly. I can maximise applications to either screen perfectly without them spreading across both screens. As soon as I connect the third screen via the usb2vga adaptor maximising an application causes it to spread across both screens yet the third usb2vga screen has it's own virtual desktop environment.
I have tried numerous versions of my xorg.conf file that I have generated to incorporate the usb2vga adaptor to make this work and regardless of what xrandr commands I send including changes to the gconf settings nothing seems to solve the issue.
It seems odd that I can create a panel and position it left, right, top or bottom of the second monitor of the extended desktop and it sticks to the screen dimensions yet I can't get any application to do the same when there is a third screen connected through the usb2vga adaptor.
I don't use Compiz, it crashes my system and I don't want separate workspaces I want the extended desktop with the two separate virtual screens to fit on the two separate screens that form part of the extended desktop.
With Xinerama deprecated what other options do I have.
Today my cursor became distorted. It worked fine on the second screen, connected to my notebook and screenshots displayed it well. So I did a little googling, and found out, that it is a known bug. I followed different tutorials. And now my cursor is blinking and disappearing. And it drives me crazy. It was a lot better when it was distorted. My xorg.conf:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "Configured Screen Device" 0 0
Screen "amdcccle-Screen[2]-0" RightOf "Configured Screen Device"
[Code]...
I'm trying to run backtrack from a usb drive on my netbook. Upon loading it, i get "Fatal server error: no screens found".
View 1 Replies View RelatedI am trying to perform a hard drive installation of RHEL 5.5. I specify the installation method and the partition and directory holding the ISO image in /etc/grub.conf
Code:
However, I am still presented with the "Installation Method" and "Select Partition" screens when anaconda runs. Is the syntax of the repo boot option correct?
I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :
(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration
Fatal server error: no screens found
but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows
Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary
I have encountered a bug in plasma desktop - clock widget tool, when browsing months. I found in Kmenu>Development>KDE Bug Management Tool but don't know how to use it. I try everything in the menus to record and reproduce the bug, but nothing happens.
View 2 Replies View RelatedI need to point aaa.com to bbb.com in DNS. I know it is possible to add subdomains for aaa.com to point to bbb.com (or its sub-domains) but in this case I need to have aaa.com point to bbb.com. I used the following in zone file of aaa.com but it didn't work
----------------
@ IN CNAME bbb.com.
----------------
I am going to configure sentmail server i.e[root@mailserver ~] on Red Hat Linux 4 Enterprise.Already I have configured DNS server. I want to add record of my mail server in my DNS server.Kindly just guide me that what
Code:
$TTL86400
@IN SOAns1.mydomain.com. root.localhost(
42; serial (d. admin)
3H;refresh
[code]....
i was wondering how to record my desktop i tried using RECORDMYDESKTOP but does not work
View 3 Replies View RelatedSo im trying to setup easystroke but im having problems recording the gestures.I apply the command and when i click to "Record Stroke" im prompted with "The next stroke will be associated with 'command'..." etc. but i cant seem to record any gestures after that message.did i forget to do something?Do i have to change any settings?Btw i installed it through Package Manager
View 4 Replies View RelatedI want to create a Ptr record on the Dns server. Dns server is Fedora Core release 1 (Yarrow). And We have been using zone files. How can I create a Ptr record for an ip address on the Dns server?
View 2 Replies View RelatedI found that Mike Oldfield "Tr3s Lunas" being played backward (from the end to begining) is an addictive, magic music. For this I used alsaplayer. Now I want to record these reversed music, not everyone player is able to play backward, how I can do that?
Now I am using some kind of a mutant ubuntu, say version between 9.10 an 10.04, with gnome desktop and alsa sound system.
I currently have pclinuxos 2007 (updated to kde4). I put on webinars, and like to record them using recordmydesktop. All is working fine by putting a splitter in my speaker out, and feeding it back into my line in. This only works when I have analog loopback not muted.My problem is that pclinuxos is now putting out there 2010 version, and there is no way I can see to un-mute the analog loopback. It does not show up as any options onkmix.... I am going to attach a couple pictures one with my old kmix, and one with the new 2010 version.My question is, how can I get back that analog loopback, or is there another way to get the sound to record from both my speaker and my mic?
View 14 Replies View RelatedI have another thread going on where I cannot record from the line in on my iMac running Ubuntu dual boot. In this case, i have a Dell PC that I am trying to record from the same radio I use to record from on my Mac. On my iMac and my G4, recording from the radio works fine. i tried recording from the Dell with no luck. What should I do? The cable is plugged into the proper port on the back of the Dell. [URL]
View 11 Replies View Related