General :: 'make Menuconfig' To Make These Files Modules Rather Than Compiled Elements?
Feb 25, 2011
I need to modify fs/open.c and fs/read_write.c to make my modifications. I cannot find any options in 'make menuconfig' to make these files modules rather than compiled elements. I'm thinking these cannot be modules because the file system won't work without open.c and read_write.c. Is this correct - I cannot compile fs/open.c and fs/read_write.c as modules, only as compiled elements? Or, is there some way for a module to overwrite these routines when the module is installed and re-enable the routines when the module is removed?
View 3 Replies
ADVERTISEMENT
Aug 4, 2011
[code]...
why is this? make menuconfig giving error
View 1 Replies
View Related
Feb 20, 2010
In linux kernel compilation steps what is difference in the functionality of 'make' and 'make modules' with respect to file system
View 3 Replies
View Related
May 23, 2011
Trying to build a driver for a TV tuner card. When I enter 'make menuconfig', I get this error:
make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64'
/lib/modules/2.6.32-5-amd64/source/scripts/Makefile.build:44: /lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile: No such file or directory
make[3]: *** No rule to make target `/lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile'. Stop.
make[2]: *** [scripts_basic] Error 2
Suspect I need another package in addition to linux-headers.
Running Squeeze, amd64, KDE.
View 7 Replies
View Related
Jan 18, 2011
Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:
Code:
make menuconfig
*** Unable to find the ncurses libraries or the
[code]...
View 3 Replies
View Related
Jul 12, 2010
I'm simply trying to compile a vanilla kernel from Kernel.org, I've done it before, however "make menuconfig" returns an error after I've made my changes to the config file.
Code:
Why is make returning that error? I am using a 64-bit kernel.
View 2 Replies
View Related
Aug 25, 2009
When configuring a custom kernel using fedoraproject.org instructions, the make menuconfig options for LIRC are not in the .config file anywhere. I checked the kernel tree and all the files are there in the .../drivers/input/lirc subdirectory (I need the lirc_dev and lirc_i2c drivers). I reset the .config to its original settings to make sure I didn't mess up. I also grep'ed the .config file for any LIRC related settings, none found. Also I'm not getting any sound from the radio-aztech driver.
View 1 Replies
View Related
Aug 2, 2011
I am getting this following error when I do compilation..Please let me know what is missing
ubuntu@ubuntu-desktop:/home/swamy/ttviewer/uvcvideo-2.6.32$ make
make -C /lib/modules/2.6.31-203-gee1fdae/build SUBDIRS=/home/swamy/ttviewer/uvcvideo-2.6.32 modules
make[1]: Entering directory `/usr/src/linux'
[code]....
View 1 Replies
View Related
May 9, 2010
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies
View Related
Oct 7, 2010
I am getting an error as below.
How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.
How can I resolve this error.
View 4 Replies
View Related
Jan 22, 2011
i couldn't find anything on google. So here is my problem: It's Debian GNU/Linux. I installed apache2 a few weeks ago, but due to some work I couldn't go on installing further things. Today I installed php5 and mysql. Everything seemed to work fine. I loaded an existing MyBB Board and WordPress Site onto the server and imported the mysql db. I can open the sites and login. However, there are problems. I think my problems are due to the compiled modules. Some are missing. I checked several sites. They all give me this listing:
Code:
apache2 -l
Compiled in modules:
core.c
mod_access.c
[Code]...
What should I do? How can I get the missing modules? Do I have to install apache again (how? remove - install? install what?)? Step-by-step instructions would be kind, because I don't know a lot about unix systems.
View 3 Replies
View Related
Jun 20, 2011
Player-Stage uses .cc files. I know how to compile them. But how do I actually execute my code? There is an output file generated. There is nothing in the .cfg file or in the .world file that specifies what program to use to run the robot. Or is it not specified in the world or cfg files?
Then how to make the robot obey my compiled .cc file? If this question is silly or if I am asking stupid questions
View 5 Replies
View Related
Jan 19, 2011
I have a package that has to configure with "make menuconfig". I want to make this automatically. Usually I save the .config-File and replace the config with a skript, but the package I have to install has no .config. The manuall told me that I have to make the following steps:./configure --with-linux...makemake installIs it possible to use the saved .config-file?
View 1 Replies
View Related
Dec 24, 2010
After reading all the forum entries and tutorials I could find, which all make it sound very easy to do, however I type the command 'make' in the folder where I have the "rtl8192su_linux_2.4_2.6.0003.1019.2009.tar.gz " unzipped and get the following output:
make[1]: Entering directory `/lib/modules/2.6.35.6-45.fc14.i686/build'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory `/lib/modules/2.6.35.6-45.fc14.i686/build'
[code]....
View 10 Replies
View Related
May 28, 2009
I keep getting things like code...
but i already do
yum groupinstall "Development Tools"
yum install kernel-devel
commands.
I just reinstall my centos, and in the previous installation I used the virtual box without problems. that is giving wrong this time?
(i had tried the .run installer and the rpm installer but all lead the same.)
View 5 Replies
View Related
Sep 17, 2015
i'm trying to install driver for some PCI device but i have problems with it - when i run it it gives me an error
Code: Select allmake: Entering directory `/lib/modules/2.6.32-5-686/build'
make: *** No rule to make target `modules'. Stop.
make: Leaving directory `/lib/modules/2.6.32-5-686/build'
i've tried to find solution in internets but have no success usually they say that problem is that ppl forget to download kernel-headers and kernel-sources or unpack kernel-sources or make symlink usr/src/linux but i've done it all and the result is the same.i think the root of problem is that `/lib/modules/ 2.6.32-5-686/build' folder is empty but there have to be this RULE, so what i have to do to have it there? my system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686.
View 2 Replies
View Related
Feb 17, 2010
I'm attempting to install a WLAN card driver from source, as that's all that's available.I'm getting:
make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory
Build appears to be a link pointing to "/usr/src/linux-2.6.31.5-0.1-obj/x86_64/desktop"."linux-2.6.31.5-0.1-obj" doesn't exist.
View 4 Replies
View Related
Mar 22, 2011
I then went agead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
Check old driver and unload it.
Build the module and install
make: *** /lib/modules/2.6.32-71.el6.x86_64/build: No such file or directory. Stop.
[code]....
View 4 Replies
View Related
Mar 30, 2010
Code:
anisha@linux-p0mg:~> uname -r && cat /etc/*release
2.6.25.5-1.1-pae
openSUSE 11.0 (i586)
VERSION = 11.0
My small Makefile:
Code:
obj-m += serialPortISR.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
Errors I receive:
Code:
anisha@linux-p0mg:~/Desktop/serialPortISR_31_10_09> make
make -C /lib/modules/2.6.25.5-1.1-pae/build M=/home/anisha/Desktop/serialPortISR_31_10_09 modules
make[1]: Entering directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make: *** [all] Error 2
View 12 Replies
View Related
Oct 6, 2010
I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers-2.6.31.5-0.1-desktop /lib/modules/2.6.31.5-0.1-desktop/buildln: creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls2.6.31.14-0.1-debug 2.6.31.14-0.1-desktop 2.6.31.5-0.1-desktop2.6.31.14-0.1-default 2.6.31.14-0.1-xen
View 9 Replies
View Related
Jul 14, 2010
I recently bought a pci multi io card to give my pc 2 parallel ports. For Linux, Moschip supply the source plus makefile and instructions. I ran make as root and got an error message
make: *** /lib/modules/2.6.31.12-0.2-desktop/build/: No such file or directory. So I created a folder called build in /lib/modules/2.6.31.12-0.2-desktop but that isn't good enough as I still get an error cannot make target modules. So I assume there must be something in the build folder. So what packages do I have to install to get the correct environment to be able to build the driver? Has anyone done this and can supply the driver for 11.2?
View 9 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
Feb 23, 2010
difference between make and make bzImage commands as both are used to build source code.
View 1 Replies
View Related
May 8, 2011
I am attempting to compile the linux-2.6.35.13 kernel from kernel.org to use with an installation of Fedora 14 (2.6.35.11-83.fc14.x86_64). I've done this before with different kernel versions for older versions of Fedora, but I've encountered a new problem this time. Whenever I get to the "make install" step, I get the following:Quote:
sh /home/user/testing/source/linux-2.6.35.13/arch/x86/boot/install.sh 2.6.35.13 arch/x86/boot/bzImage
System.map "/boot"
[code]...
View 5 Replies
View Related
Jul 13, 2010
We are running SLES 10.3, I am running Novell's support advisor and it is reporting some old hardware that is failing on bootup, one being a QLogic card and another being flex net network adapter. I was looking around for where the file or directory is that holds the list of modules to be loaded when compiling the kernel but SLES does not seem to match other Linux distro's, at least from the other posts I read for where to find these.
View 3 Replies
View Related
Jul 9, 2011
Under Debian "Expert Installation" once I have chosen installation/system language and location, I get an informative notice, that:
Code:
There is no locale defined for the combination of language and country you have selected.
..and I need to choose one locale available for the selected language. As I understand, locale is just a set of environmental variables used by applications and printed out with locale command?
In addition, is it possible to generate own locale files after the installation, which will match my needs?
View 1 Replies
View Related
Feb 10, 2010
I'm currently trying to make a script to rename all the files with one provided file extension to a second provided file extension. I've achieved this by commanding "sh newext doc txt" with the following which works perfectly:
#!/bin/sh
for f in *$1;
do
mv "$f" "`basename "$f" $1`$2";
done;
However, I'd like to be able to modify what I've written so far, so that I can choose whether to convert file extensions in a subdirectory or not. For example, I could enter "sh newext -r doc txt" and the subdirectory's files would also be affected by my script, or enter "sh newext -n doc txt" which would only affect the directory I'm in.
View 4 Replies
View Related
Jun 3, 2011
My system is centos 5.5, and I need nobody:nobody's directories and files under data.
There is a directory named "data, and this directory has so many directories and files generated by web program. Most of them is nobody:nobody.
I want to to make a list of these nobody:nobody directories ans files.
Is it possible to make a list of these directories and files?
View 1 Replies
View Related
Jun 8, 2011
I have some confusion about one of my partition and the space it is taking. df -h output is given below;
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/ddf1_ADVDTARTINGp1
494G 18G 452G 4% /
[code]....
above information is showing that /var/lib/mysql partition total size is 379 GB and it is 68% used. However when I execute command du -sh /var/lib/mysql it shows following output.
# du -sh /var/lib/mysql
45G /var/lib/mysql
Now I want to know what files are taking space to make the partition 68% used. I want to list down all files in that partition with size.
View 8 Replies
View Related
Jun 28, 2010
in my linux box i have lot of cron jobs. i need to make all cron jobs in script files. is it possible to make this. like[URL]Now how i change this in a script file
View 4 Replies
View Related
