I have another thread going on where I cannot record from the line in on my iMac running Ubuntu dual boot. In this case, i have a Dell PC that I am trying to record from the same radio I use to record from on my Mac. On my iMac and my G4, recording from the radio works fine. i tried recording from the Dell with no luck. What should I do? The cable is plugged into the proper port on the back of the Dell. [URL]
View 11 RepliesAfter trying Kubuntu live CD, Fedora live CD, and booting from my Ubuntu partition on my iMac, I am convinced that there is no solution at all to the problems I am having recording from Line In. Using the same radio hooked up to an old Dell PC which I am selling, recording works fine. I can see the audio signal when I go to sound preferences and click on the Input tab. Works great.
I beleive that Ubuntu just isn't compatible with the sound card in the iMac. This is too bad because I was really hoping that I could use Ubuntu dual boot on my Mac. Running Ubuntu in emulation works fine using VMware Fusion but dual boot really sucks. Unless I hear back from someone who actually is running Ubuntu dual boot on an imac and can record from the Line In.
I have a few posts open regarding the problems I have discovered after installing Ubuntu 10.04 dual boot on my iMac. I am sure I have all the necessary drivers restricted extras etc... installed and still three problems continue. These are problems that I would have assumed would work properly.
1. Unable to record Line In Recordings
2. Unable to use the built in web cam. Doesn't work at all
3. Unable to play any videos at all be they avi, mov files as an example. VLC won't even open them, Movie Player crashes when viewing full screen.
I have a feeling that getting Ubuntu to work on a Mac is way more difficult than getting it to work on a PC and I think it may be because of Apple's proprietary software.
I'm having trouble recording through either my Line-In or Mic-In inputs on my laptop through Audacity.Nothing happens at all. The device options are as follows:
HDA Intel: ALC883 Analog (hw:0,0)
HDA Intel: ALC833 Analog (hw:0,2)
pulse
default
Is this a driver issue?
I am trying to record some vinyl using Audacity. I'm using Lucid 10.04 with a Soundblaster Audigy LS card. Regular sound playback works. Recording from the mic works. I just can't get anything to record from the line in. Everything is hooked up correctly. I can hear the music through the computer speakers. I booted into Windows and was able to record with Audacity just fine there. I can't get Audacity (or sound recorder) to show and record any input in Ubuntu. I've messed with every setting I can find in Audacity. I've also messed around with the settings in the GNOME ALSA mixer and sound properties. The most I can get to record is some static in the left channel.
View 9 Replies View RelatedI am trying to get Audacity to record from a line in. Seems like it should be a fairly easy setup. I discovered that Audacity needs PulseAudio. So I installed that, and don't know how to configure it. I set the sound preferences >> Input to line in. I am using a desktop that has a line-in on the front and back, so I'm not sure which it will pick up, so I have been testing both.
View 1 Replies View RelatedI want to record a line-in source Using the Audacity program. but the wave trace in the app is not symmetrical about the zero axis. This is not what I would have expected and I wonder if it will show up as poor quality recordings when I transfer to my hifi.
View 1 Replies View RelatedI recently borked my video driver with a series of upgrades and found my system booting to the TTY with no access to the desktop, graphical login, or even X. I spent some days troubleshooting the problem and experimenting with possible fixes. I found myself wishing for some way to copy and paste from the TTY, or at least log all input and output to a file.
Code:
# bash 2>&1 | tee /tty-session.log
I have a large file 'NS0923.csv' with data like the following. There are two records in this multi-record sample.
Code:
E60898,4578910,03/06/09,BEN BOYD RD,61,82,,,127,3,,52000.3046.001,3155,4.00,,PLT,1356,1.00,05/06/09,Y,Y,0551
,,,,,,,,,,,,4057,1.00,CLEAN CAR SHARE SIGN,LAB,0551,1.00,,,,
[code]....
2. I still have to create a file 'transaction.csv' that should retrieve data from $13 - $15 with the identifying column $1. Required output:
Code:
E60898,4057,1.00,CLEAN CAR SHARE SIGN
3. And finally another file 'quantity.csv'. Retrieving data from $16 - $18 with identifier $1. Required output:
Code:
E60898,PLT,1356,1.00
E60898,LAB,0551,1.00
E60898,LAB,3065,1.00
[code]....
I run Kubuntu 11.04 and I have a C-Media CM8738 sound card. My problem is, my card won't record from the line-in jack, even when I set it to capture in alsamixer. Furthermore, the mic jack only records when both the line-in and the mic are set to capture in alsamixer. I'm using the same settings I used in 10.04, and the line-in captured fine then.
View 6 Replies View RelatedI Wanna Record My Desktop So I Found a Program Called gtk-recordmydesktop Ok,Then i Installed It
But When i click Record Waaaa The Windows Close.
I Tried Istanbul and It Wasn't Running.
I Treid Wink Which Do The Same First Program.
I Tried Xvid But The Same Thing Happens!!!!!!
IS There Any Program That Take screenshot for 1 sec i mean like take 1 screenshot per second.I Know IT Would Be Slow But It Might Help.
Or Is There A Way To Fix this ?
I have a Asus EeePC 1001px with ubuntu 10.10 and I'm unable to record sound from the webcam microphone. Does anyone know how I can solve this?
View 3 Replies View RelatedOnce upon a time when I started sqlite from the command line I could using the tabbing autocomplete to enter the database name. This has not worked for a while now.
View 1 Replies View RelatedMy GUI for backtrack is not working. I want to connect to internet. I gave the required static ip to my machine. but the problem is I have to give username and pasword through the browser before accessing the internet. Now here , i dont have any browserHow to give the log in credentials through command line in backtrack machine?
View 1 Replies View RelatedI'm running Fedora 15 XFCE spin, Audacity 1.3.13-beta and my sound is ALSA/Pulseaudio (I'm not totally sure what these are anyway, are they drivers?) Anyway, when I'm in Audacity and I go to the record options I can choose from default, pulse, and HDA ATI SB:ALC268 Analog (hw:0,0). If I try any of these three options and press record I get static. Here's a screenshot of what it looks like to press record for each of the three options in order.
[URL]
The last option won't even record nothing, it just doesn't work. Also, if you look where the little picture of the microphone is, the option to drag the input volume is greyed out.
I was running 9.04 and could, through some magical sequence of toggling options that I was unable to figure out, occasionally get recording from the mic to work in audacity. Ardour worked more reliably, but is kind of over-featured. Audacity is simpler and I know how to get things done. For a while, I was doing basic recording in Ardour, saving it to wav then editing in audacity.
Well, I noticed a howto on getting audacity working in 9.10... so I upgraded ("what could possibly go wrong?"). I still can't record audio in audacity and ardour is now ALSO unable to record audio. They start recording samples but nothing comes in but silence. I've got audacity set to ALSA/default/default and when I click monitor, the stream appears in the pavucontrol app. I've moved it to the input device and that doesn't seem to affect the results at all. Everything looks like it should be working fine except there's some invisible mute button, or something. Under alsamixer's Capture section, Mic has a red "CAPTUR" with no bar to adjust.
i installed ubuntu inside windows but someone instead of uninstalling it directly deleted the ubuntu folder inside windows ,thinking that the partition will be deleted. but when i restarted the system and command prompt came and said unable to find boot record and i couldn't boot windows as well and a grub prompt came like grub>, then i inserted the windows boot cd and repair the boot record error but my problem is , instead of doing this way, can i do so by grub prompt directly without using winidows cd.
View 1 Replies View RelatedI am configuring my Apache Server to enable checking CA Revocation List, and my Configuration lists as following :
Code:
SSLCARevocationFile /etc/httpd/confi.d/ssl.crt/CRL1.crl
But the server can not start, and the log says:
Code:
Unable to configure X.509 Storage for certificate
If I try this command to view content of my CRL file :
Code:
openssl crl -text -in CRL1.crl -noout
the console shows :
Code:
error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib:647:Expecting: X509 CRL
I think there is something wrong with my CRL file, such as the file format.Is there any requirement to the CRL file? What can I do to enable this CRL file checking?
I just installed ubuntu 10.04 on my laptop. Everything works well, but I have problem with sound. Output is OK as I can hear any sound from the computer; but there is no input sound from the mic. I am unable to record any voice or talk in voice chat.
View 1 Replies View RelatedHow to create cron tab when DSL line down set automatically restart the network service while DSL line up?
View 3 Replies View RelatedAfter running the following command, I get:
[root@yukiko /]# find / -iname .bashrc
/home/clamav/.bashrc
/home/vpopmail/.bashrc
/etc/skel/.bashrc
/root/.bashrc
But I would like to have a command that prints a specific line by supplying the command with the line number, for example:
[root@yukiko /]# find / -iname .bashrc | getline(2)
/home/vpopmail/.bashrc
Is there such a command on CentOS?
I have several files with many lines something like this:
I'm trying to write a script that will count the number of characters per line that doesn't contain a ">" symbol and give me an average of those values. I have most of the script together but I can't figure out how to connect some of the steps.
Code:
I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
Sample input $FileName
Code:
Code:
Code:
Script so far:
Code:
I've written a script to parse a file and print each line that ends with matching pattern, if the next line is blank. The pattern lines are the result of md5sum $i|sed 's/path///g' so that only md5 and filename appear. Here's what I'm using.
Quote:
for fline in `sed -n '/.*.ext$/p' file1`
do
if [ "`sed -n -e '/'"$fline"'/ {n; p;}' file1`" == "" ]
then
echo ""$fline" has no info" >>file2
fi
done
[Code]....
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View RelatedI want to sort a number of lines based on their size:
data:
-------
12345678
87654321
1234
[code]....
Should output as:
-----------------
1
2
12
21
[code]....
But i'm gettings this with sort
----------------
1
12
123
1234
[code]....
Can we sort the above "data" text, based on "number of characters" instead of "character order"?
I am combining data from a couple different input files and creating an output file in a specific format. I notice that if I use the >> operator, information gets appended to a new line in my output file. This is useful, but if I'd like to append onto the CURRENT line, is there an easy way to do this? I've been googling around and see lots of complicated answers, nothing that suggests to me an easy way to do this. For example, if my output file looks like this:
b1a:] cat test
hello my name is
b1a:]
and I'd simply like to append "Bob", how can I do it? If I use
b1a:] echo Bob >> test
b1a:] cat test
b1a:] hello my name is
Bob
b1a:]
So what I would prefer is some command that would create the result:
hello my name is Bob
This solution works but is slow with large files. I am looking for a faster solution.
The 2 files contain filenames, one of them has associated data I want to append to the other file's matching filenames
file1:
file2:
I append file2 by matching the unique_filenames and appending them with the tag data and some formatting
appended file2:
Here is the SLOW code
while read inputline.
I need to grep for a particular string and if found need to display the line containing that string, the line above that and also the first line of that paragraph.
Can this be done via sed.
Eg, My Paragraphs
OA connectA
Enclosure:
Interconnect Module #6 Status:
Here, if I grep for Critical, it should display the following
Similarly if I grep for Degraded, it should display