General :: Blinking Cursor (used To Be Distorted) On Multiple Screens - ATI Driver?
Feb 7, 2011
Today my cursor became distorted. It worked fine on the second screen, connected to my notebook and screenshots displayed it well. So I did a little googling, and found out, that it is a known bug. I followed different tutorials. And now my cursor is blinking and disappearing. And it drives me crazy. It was a lot better when it was distorted. My xorg.conf:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "Configured Screen Device" 0 0
Screen "amdcccle-Screen[2]-0" RightOf "Configured Screen Device"
[Code]...
View 2 Replies
ADVERTISEMENT
Dec 18, 2009
get multiple screens working in Xorg with the Intel driver? I can manage to get Dual Head working (one big screen), but I'm interested in having two seperate X sessions (two screens) instead.
View 1 Replies
View Related
Feb 8, 2010
I am running PClinuxOs 2007 version. It will not fully loaded during start up. it prompted:
enter runlevel: input: Imex PS/2 Generic Explorer mouse as / class / input / input1.
the cursor is blinking but does nothing more.
View 1 Replies
View Related
Mar 8, 2011
I have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.
I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.
View 1 Replies
View Related
Jul 1, 2010
I am trying to boot up Linux Mint 7 after a packages upgrade and it boots up but then it shows this and stalls.And similar messages for GDM and then it just shows a black screen with a single blinking cursor on the middle left of the screen. I cannot do anything except press the CTR-ALT-DEL combination to re-boot, then it shows the usual shutting down messages and does the re-boot.I am running the 2.6.28-19 kernel and I have upgraded the Ubuntu packages on my Linux Mint 7 system from Jaunty to Karmic. Please help as I do not want to re-install. I am running Knoppix 6.3 ATM and I should be able to chroot from that if necessary. I am booting from /sda1 that has Linux Mint 8 installed and grub 1.97.
View 1 Replies
View Related
Sep 24, 2010
My ubuntu 10.04 has two monitors connected both being treated as individual desktops.But only one desktop is showing the wifi network icon in the notification area.Is it possible to have more than one wifi icon going at one time?
View 1 Replies
View Related
Apr 2, 2015
I've recently installed Debian 7.8.0 amd64 gnome on my new ASRock Q2900 mobo/cpu combo (It has an embedded Intel J2900)
The system boots fine but I am unable to restart it. If I tell the system to restart I see the mobo splash screen but before I see any mention of grub it gets stuck with a flashing cursor in the top left.
At this point I can hold the power button for 5 seconds and after it shuts down, I can boot it no problem. I can work my way around this issue but there shouldn't be any reason to need to.
View 14 Replies
View Related
Mar 9, 2011
I am trying to install any version of ubuntu (I even tried so far another version called jollicloud) but the result is always the same...The computer is a Dell Mini 9. I have pulled out it's SSD because it has broken.I managed to install about some months ago an ubuntu netbook version (10.04, not sure) which all worked fine from a 8GB usb stick Here are my steps:
1. Download ubuntu either netbook or standard version
2. Make a bootable flash with Unetbootin from ubuntu or other programs from windows
3. Put the flash disk and the second 8GB flash to the dell mini 9
4. Boot Ubuntu live from the first flash (sometimes I think I must put the second flash after the boot so it finds only the live version... If I have put both flashes sometimes it won' t boot)
5. install ubuntu to the other flash (to the 8GB flash drive)
6. reboot
and then...only a blinking cursor is appearing to the top left of the screen with nothing else happening...Shift does not do anything.I have some suspicion that there is no Grub at all but I am not sure for this.I am sure there is a way to make it because I ve done it before, but I don't remeber how!
View 3 Replies
View Related
Aug 5, 2010
I have dual monitors that I have set up with two separate X screens with the nVidia control panel. For some reason at times when I move my mouse between the two screens, the cursor will start flickering rapidly between the adjacent edges of the screens and the system will become completely unresponsive, forcing me to do a hard reboot (the keyboard doesn't have a SysRq key).
View 6 Replies
View Related
Apr 21, 2015
I'm thinking about switching to Debian from Ubuntu, so I installed Debian (debian-7.8.0-amd64-DVD-1) in dual boot with my Ubuntu 14.10 (Uefi install). Installation process was OK (I think), I got a working GRUB that recognizes both OS, but Debian boots to a blank screen with a flashing cursor in the top left corner (Ubuntu boots perfectly). I also ran into some graphics-related problems while installing/booting Ubuntu, due to my AMD GPU graphics, that I solved adding the nomodeset option to the kernel in GRUB, but that no longer seems to do the trick here. Here's some info about my machine:
HP Envy 15
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
[Code] ....
I don't know why they are listed as microsoft basic data.
View 9 Replies
View Related
Jun 18, 2009
I installed F11 without issue but after rebooting all i got is a blinking cursor with no error messages or indeed any other form of feedback.
To check i was even getting as far as grub i went into rescue mode from the dvd and edited the grub.conf to remove the hiddenmenu option and set the timeout to something a little larger. This confirmed that grub does in fact seem to be loading fine. Selecting the Fedora entry still however leave me with just a blinking cursor.
Next i tried removing quiet from the boot commandline. same result.
Just in case i had the wrong disks configured in grub i tried swapping root(hd0,0) with every combination available with as expected various errors about either partition not being suitable or files not found.
Using grub to boot manually to a usb disk worked fine so grub does seem to work.
With no feedback at all i tried all the common options people suggest just in case the kernel is booting but not getting far enough to output to the screen. So far i tried noapic acpi=off nomodeset.
I tried installing 3 times so far with slightly different configurations just in case but still no luck.
Basic partition layout in case it helps:
/dev/sda <-- boot loader installed here.
/dev/sda1 /boot ext3 2GB
/dev/sda2 swap 4GB
/dev/sda3 / ext4 634GB
Various other disks are present but not part of the configuration. I double checked they are not mentioned anywhere in the common places like fstab.
View 5 Replies
View Related
Oct 6, 2009
i worked on my notebook as usually. The only thing i did with the system was the update. The little screen appeared and I clicked to update everything. After the logoff/logon everything worked fine. But the next morning (yesterday) the system loaded and finished with the blinking cursor on the black screen. the yum.log output is the following (from 4th Oct):
[code]...
i did the system update but it haven`t fixed it.
View 3 Replies
View Related
Nov 23, 2009
I used the F12 DVD to upgrade my system, before all the NVIDIA warnings were posted. I have a Geforce 7100 (7 series) card and used the rpmfusion drivers on Fedora 11. After the upgrade, I get a blinking cursor at boot time. What I should do to repair the mess.
View 5 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 7 Replies
View Related
Jul 11, 2011
I am using fedora 15 on my dell studio 1558 . Sometimes a black screen appears with a cursor blinking when i tries to reduce the brightness of the laptop and somethimes it automatically happens . And i am not able to do anything its just like the blue screen of death as in windows . the only way to get back is by restarting the computer
View 8 Replies
View Related
May 31, 2011
Today I decided to play with my new 11.4 Opensuse dvd. It installed and booted without any problem, and I didn't face any problem until I rebooted the computer to test my newly installed nvidia graphics drivers. openSuse wouldn't boot. Well, the important side is: there are no kernel panics, no "hit enter to restart computer" to find the reason. Just a blinking cursor after an attempt to find the kernel. I only could get out of that by pressing the reboot button. I decided to press c and boot manually:
Code:
grub> root (hd0,4)
Filesystem type is ext2fs, partition type 0x83
grub> kernel /boot/vmlinuz-2.6.37.1-1.2-default
and the computer just froze. At this stage pressing tab for autocompletion at kernel line freezes the computer, too.
Maybe additional boot parameters?
Well, considering that installation brought me to a desktop, the system seems to be up and ready to run. Nothing seems wrong with my menu.lst:
Code:
title openSUSE 11.4
root (hd0,4)
kernel /boot/vmlinuz-2.6.37.1-1.2-default root=/dev/sda5
initrd /boot/initrd-2.6.37.1-1.2-default
(I did not install a bootloader with openSUSE. This is legacy grub bootloader of Debian)
View 4 Replies
View Related
Apr 2, 2010
I put the ubuntu 9.10 disk to install it I wait a long time then at the left upper corner a cursor appears blinking then I wait more then nothing happens.
View 3 Replies
View Related
Jul 12, 2010
Installed the minimal system ( didnt check any of the boxes when it asked me what i wanted to install.I just want a command line system to build from btw )Finished the installation and i just get a blinking cursor now.
View 6 Replies
View Related
Oct 20, 2010
I have a box with lucid I rarely boot. When I do there is usually some trouble, as now. The only thing that happens is that a blinking cursor appear, and nothing happens. Usually the box also never shutdown, I end up with having to hardboot it.
What causes this, is there anything I can do to fix it? As of now I can't get the beast back up. I'm running x64, a cheap raedon 5xxx card and an amd x4 processor.
View 3 Replies
View Related
Oct 21, 2010
I decided to swap my media center PC over to Kubuntu after I had some issues with the Ubuntu 10.04 to 10.10 update. It has had Ubuntu on it for probably 3 years now. Most notably, the same issue is occuring now with any installer later than 9.04 which leads me to believe it is all Grub2 related.
The install runs without errors, but after booting from HD I get only a blinking insertion cursor. No Grub at all. I've held in shift, nada. I booted to Live CD and reinstalled Grub manually but still no love. It acts as though Grub simply isn't there.
I do have a second hard drive in the box that has Ubuntu 9.04 on it that I use as a backup if the OS HD gets messed up, but it is second in boot order and shouldn't be causing an issue. Besides, if that HD was booting it would be giving me legacy grub, not a blinking cursor.
View 4 Replies
View Related
Nov 10, 2010
Just did a fresh Ubuntu 10.10 (minimal) install on my Asus EEE PC 1001PX.Before the minimal install I had Ubuntu Netbook Edition 10.10 which worked flawlessly, now all I get is a black screen with a blinking cursor:for the amazing quality, but I guess it's better than nothing.ctrl+alt+Fx does nothing, ctrl+alt+del reboots the computer.Booting with the usb-stick that was used for the install takes me to the login...
View 3 Replies
View Related
Nov 13, 2010
After installation of Fedora core6, only i can access to Graphical interface(ctrl+alt+F7) only. When i press ctrl+alt+F1 ,F2, etc.only get blank screen alone with blinking cursor. My system configuration is PIII, Intel 810 chipset.
View 1 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2. I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation. Also I am not able to install anything using YUM. It gives the following error:
Code:
[error 14] PYCURL ERROR 6-""
I work behind a proxy.
Please help as to how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 1 Replies
View Related
Aug 20, 2011
Im using 5.6 DVD install to a HW raid1 Card (2 x SSDs in raid 1, Arcea Card Natively recognized by centos anaconda).I select to wipe the entire drive and remove ALL partitions (ive also tried setting this to just remove linux partitions). The install location (raid drive) is /dev/sdh the A-G are other 1.5TB drives.I also un-check EVERY drive except the raid drive (sdh). it then asks me if it ok to wipe/reformat drive (Prompts Yes or No, i click yes)Every time i do this install i get the blinking cursor after post. Im told this means i dont have GRUB installed, i do NOT disable grub or anything related to the boot-loader in anaconda installer (all those setting are left at default). ive also tried setting this to NO boot loader, and i get the same result.
This DOES work as i have gotten it to install and run prefect for a few weeks. I think what i did then was removed ALL THE DRIVES except teh raid drive, and then did the install then. This way the install drive was /dev/sdA and all worked, even when i added the drives back online after the install, the machine ran great and booted several times this way (i had to do a os re-install or else i would have left it as is.)YES bios is 100% set to the raid card as the first device to boot from, Centos 6 installed to the same raid drive boots and works great - but i need 5.6.no google help on this one, searched hard, only one article on Ubuntu doing this all the time.also everytime im retrying to install 5.6, i go into the HW raid card's bios and delete and recreate the raid1 volume (it takes about 10 min for it to format and initialize the raid1 array
View 2 Replies
View Related
Oct 31, 2013
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
View 5 Replies
View Related
Apr 20, 2015
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
View 9 Replies
View Related
Apr 1, 2015
My cursor blinks when hovering over the likes of web page tabs and disappears behind open windows especially if im in system settings its hard to know where my cursor is sometimes, its really putting me off and i don't want to install different distro because of it, i really like debian even being beginner with debian.
View 4 Replies
View Related
May 17, 2011
I have a machine with Squeeze that currently boots from an USB thumb drive (that was the only drive on that box, referenced as SDA in /dev... Yep, no optical drive or HDD). I have installed an SSD on that machine. It is referenced a SDA, and the thumb drive has been nudged to SDB. I'd like to boot from the SSD and ditch the thumb.
I've partitioned and formatted the new Disk (ext4), created a swap file (to keep things simple, no swap partition), and used rsync -Sax / /media/USB0/ to clone the content of the root FS. I've edited the fstab file of the SSD to match the config (uuid of the drive, ext4 FS, swap file) then use grub-mkconfig -o /media/USB0/boot/grub/grub.cfg (I apt-get installed grub 2)
I've set the SSD as first boot device in the BIOS. Now when I boot from the SSD, all I get is a blinking cursor at the top of the screen (the thumb drive still boots fine). I guess I missed something .
I've been struggling with this for about 2 hours now (not the grub issue, the whole mess). I've tried googling this last problem, then searched this forum with no luck (I usually find stuff about people who want to boot from a drive other than the first one and must daisy-chain grub).
Bootloaders (and low level linux stuff) are new to me. I'm afraid to botch the bootloader of the thumb drive (grub 1.9x), and to be locked out of the machine.
View 12 Replies
View Related
Aug 28, 2011
I am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.
I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.
View 1 Replies
View Related
May 1, 2010
I have a single XP install on another partition, but can't boot to it now that I have upgraded to 10.04. Also, when starting Ubuntu, it takes a good 30 seconds to actually start booting ubuntu after I have selected it from the GRUB list (just sits there with a blinking cursor)
Noticed other users have been directed to run the boot info script, so here are the results from that.
Quote:
View 3 Replies
View Related
