I am having trouble upgrading my broadcom drivers ( bnx2 ) for some reason i can't switch Broadcom NetxtremeII support from "built in " to module in menuconfig. can someone show me why this is the case?
[code]...
also i do have loadable module support enabled[*] Enable loadable module support
I am looking for information to insert kernel module into kernel. I am not looking at dynamically insert of kernel module using insmod, modprobe etc. I am looking for statically insertion of kernel module procedure, such as what to change on makefile, what to change on menuconfig, what to change on .config file, etc.
View 2 Replies View RelatedI was going to buy a TP-link wireless router (802.11b/g/n) but while I was reading the consumer's reviews I saw some people were saying that they couldn't make it work with ubuntu. So, I'm starting wandering if there is somewhere any compatibility list? I mean if for instance TP-link or D-link would work with broadcom's chip. I would like to use my laptop's built-in wireless module which is HP Broadcom corp. BCM4306 802.11b/g. My laptop is a HP Pavilion zv6000.
View 2 Replies View RelatedOn aMSN the webcam works,but it's very very dark, and i can't move the adjusment handlers for some reason. Also, i tried several methods to increase the gamma, but it just won't work...nothing changes.how can i proceed?
View 1 Replies View RelatedAfter upgrading to Lucid said adapter is nonfunctional - NetworkManager won't start on booting (I'm using 2870sta module) and it finds no networks - neither does WICD. The device itself is identified: "lsusb" gives a line "Bus 001 Device 005: ID 148f:3070 Ralink Technology Corp." "iwconfig" gives nothing under lo and eth0 and this under wlan0:
Code:
RTxx70 Wireless ESSID:""
Mode:Auto Frequency=2.412GHz
Link Quality=10/100 Signal level:0 dbBm Noise level:-143 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
And a "lsmod | grep -e rt2 -e rt3" gives:
Code:
rt2870sta 525366 0
(Note: I had a similar problem going from Jaunty to Karmic, but blacklisting rt2800usb in my blacklist.conf fixed it. No such luck this time.)Using a Zonet ZEW2500P.x86-64 Lucid.
I just installed debian (lenny) on a new MSI 785GTM-E45 motherboard with a built in Radeon 4200. I have a MAG 22" LCD monitor that has a maximun resolution of 1680X1050.xrandr on my sytems reports the following: the maximum is incorrect
Screen 0: minimum 320 x 200, current 1920 x 1440, maximum 1920 x 1440
default connected
1920x1440 0.0
[code]....
I have a HP ProLiant DL380 server and I am trying to install Debian on it.
I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.
I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.
I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]
Is this a kernel mismatch between my Deb. version and the driver?
And after many try my server started hanging at detecting network hardware stage, how can I deal with this?
Also finally I started to get this...
[url]
Is this happening because I am using wrong architecture CD?
I have i386 image and my server has 2 x Pentium 3 processor.
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I'm using Logitech WebCam on fedora 11 and running webcam server to capture the images on the browser.. it works fine but the image quality is poor...could anyone suggest me how to change the image quality by passing parameters via command line??I tested Video quality on cheese as well, which is poor too..I searched a lot in google for a solution but no use... i got some patch but couldn't install that since the gspca driver on my fedora 11 is in-built..
Output of lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 020: ID 046d:092f Logitech, Inc. QuickCam Express Plus
[code]....
I have on my Asus x59sl laptop webcam with built-in webcam. Here is the lsusb output:
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 001 Device 005: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code].....
I have had this issue for a while now but never really messed with it enough to try and fix it..
View 3 Replies View RelatedI have a WRTG54S Linksys router and Fedora 11 on my Asus EeePC and I would like to be able to access my Fedora remotely via ssh however I'm not sure which info and were do I need to change it in my router, also I want to be able to change the ssh port access is it from /etc/sshd_config ? My internet connection at home is via cable modem and with a connection that is always on. (no dialer)
View 2 Replies View RelatedI've installed Debian 8.0 Netinst ISO on my old Ubuntu 8.04 Desktop to upgrade it for banking access requirements. I've installed the 32 Bit Jessie (Debian 8.x) and I am trying to get GWintree installed from the .deb file on the Internet. It was missing libtiff4, and I contacted the author about the missing lib. He rebuilt GWintree for Ubuntu 14.04, and uploaded the new .deb file. Now, when I try to install the deb with gdebi, I get another missing lib named libjpeg8, which is a runtime module. libjpeg8 is not available in Jessie, but is available
in Stretch (unstable) & also SID.
Is it possible to change my repositories, and add just the libjpeg8 module and get GWintree installed. That assumes there aren't other missing libs as well. If not, what is the best way to get libjpeg8 backported to Jessie? Who does this type building? GWintree worked well in Squeeze & Wheezy! I hope I can get it working in Jessie.
I've fixed an tarball damaged and now obtain many file with the same name into; I tried to create a script based on a previous originally based on the "zipfile" module:
original:
Code: #!/usr/bin/env python
import os
import sys
import tarfile
[code]....
but obtain error becouse the tarfile has not the attribute "infolist" how i could change correctly the script for the tarfile module?
I'd like to change the existing kernel module (driver) file and compile a custom kernel.
Is this the correct way:
there was something like <board name> and deconfig or something so that make menuconfig can be configured.
View 1 Replies View RelatedHere is my result from lspci |grep ther
[root@ast ~]# lspci |grep ther
00:19.0 Ethernet controller: Intel Corporation 82567LF-2 Gigabit Network Connection
01:00.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
I have noticed that my 1st ethernet which is Intel is not install yet in my system, there is no (rev number) how can i install my Intel LAN (built-in)
I'm experimenting with 2.6.33-ck1 mainly because I want to try the BFS. I successfully configured and installed the patched kernel, but I'm experiencing various problems on the desktop. The biggest is Chromium not working at all, but there are several others, including graphical glitches in firefox. I'm sure I left some important module off or made a mistake for some settings My question is that is there a 2.6.33-fc12 kernel yet, and does it have a .config available? I'd like to load those settings in menuconfig and use them as a starting point to properly configure and complie a -ck patched kernel.
View 1 Replies View RelatedThe motherboard is an L7VMM2 Rev 1.1Initially everything was running smoothly, then I brought it upstairs and everything just failed. The computer would hang right before the POST memory check, and after a few reboots it would do the memory check and reboot. So, I opened it up and switched the RAM around thinking it may have been a BIOS bug or a loos connection and it seemed to work. Now it boots into 10.04 perfectly and is blazing fast for an old computer. THe only problem now is that according to ubuntu, my ethernet controller is non-existent. It doesn't show up in lspci, dmesg and the only thing in ifconfig is the lo interface. It will however recognize the USB interfaces. I upgraded to linux 2.6.2.32-22-generic #33 but that didn't help the issue any. Now I'm stuck, and running out of ideas
View 2 Replies View RelatedI'm using SecureCRT on a Windows host to connect to Ubuntu 10.04 using the default VT100 setting, and having a problem working with Ncurses (ie. output from "make menuconfig":[URL]...
- The screen is difficult to read/navigate
- Neither ESC nor F12 work so I can exit menuconfig
how to solve this issue?
Is there any way to record kernel menuconfig screens? I would like to have a record of the configuration as it looks to the menuconfig screen user, with each successive sub-menu indented. Copy and paste gets the data but the frame/box drawing characters are messy. Here's the first menu:
[code]...
[code]...
why is this? make menuconfig giving error
I am interested in kernel configuration and compilation, so I have executed ltib and menuconfig, but I am not sure to understand what is the difference between Linux Target Image Builder and the Menuconfig tool? Is menuconfig used by or included in ltib? I understand that both tools generate a kernel, But I guess ltib can process "something more"? (packages/target selection? )
View 2 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View Relatedi am using Ubuntu 8.10 inside VMWare Workstation 6.i need to use folder sharing feature with my host OS XP2 but when i tried installing VMWareTools i cant build several modules including vmhgfs and vmblock.Code:Trying to find a suitable vmhgfs module for your running kernel.None of the pre-built vmhgfs modules for VMware Tools is suitable for yourrunning kernel. Do you want this program to try to build the vmhgfs module foryour system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmhgfs module.
View 1 Replies View RelatedI am viswanath. i want to know how to insert a driver module in Linux fedora 2.6.while using insmod <driver name> it showing an error. shall i install any plugins.
View 2 Replies View RelatedI have been trying to get aircrack-ng program to get to work but apparently i needed a negative-one-channel-maxim patch in order for it to work successfully. I have looked over wiki of aircrack and followed the guide a few times but every time my compiled module was rejected my modprobe.
View 1 Replies View RelatedI have an old T30 that has an incompatible wireless card with my network. How can I disable the builtin wireless card while allowing my USB Linksys card to fully function?I can't figure out how to have one run while disabling the other.
View 4 Replies View RelatedRunning 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies View RelatedI've seen many posts about setting up VPN's but my doubt goes further. I just need access to the local network of my office from a Windows XP (which of course is outside the LAN). I would like this PC to have access to the whole LAN, but what I really need is it to access to an Ubuntu Server (e.g. 192.168.0.10). The router is a Netgear DG834, which has a built in VPN functionality. So, is it enough if I set it up? Do I need to install any VPN server in Ubuntu? What if I want to access to another computer in the LAN? Where should I start?
View 4 Replies View Related