After login I get the blue desktop with the swirly art thing but I don't have a starting point to be able to do anything and think screen resolution may be the issue. How do I resolve that?
View 2 Replies
So I know now that I reach the login screen, and I know to hit control, alt, f1. However, all attempts to reset the resolution have failed. Here's how it went down. I was working with nvidia driver. Already was frustrated I couldn't get a working wide screen setting for my toshiba hd tv/monitor but that's a seperate issue. I was trying to get the driver to recognize my separate monitor to an hd tv in the living room using the video out. works fine with windows. I got it to recognize, it made me save settings, and then restart. Note resolution settings are set to automatic right now. Then when I restart, I get to ubuntu splash screen, it plays the chime, and shows a blank black screen. Control alt f1 brings me the menu.
I have been told to type (this is just quick type, I used the proper commands in reality)
sudo dpkg-reconfigure xserver-xorg.
sudo dpkg-reconfigure -phighxserver - xorg
xrandr --output lvds --mode 1024x768
I found one article that gave a three step process.
sudo cp /etc/x11/xorg.conf / etc/x11/xorg.conf.custom
sudo sh -c 'md5sum ' etc'/x11/xorg.conf > /var/lib/x11/xorg.conf.md5sum'
sudo dpk-reconfigure xserver-xorg.
Nothing gave me any of the results I expected from command doesn't exist to completely irrelevant menus. Start me from the beginning to what I should do. Yes I logged in properly with my username and password to. Do the 'etc' in the command need to be filled with something else like a drive letter or something. I'm so lost, should I disconnect my tv? Also I tried running in safe mode and it said something about display not found.
I am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?
View 14 Replies View Relatedjust installed ubuntu10.04 has set monitor resolution to 800x600 i need 1920x1080 i have been at this for two days now and getting absolutely no where , i could set this on windows in 5 minutes , why does it need to be so hard on ubuntu, i really prefer ubuntu to windows but problems like this really can drive one to despair. i have tried so many different web sites and follow instructions but keep getting command not found which i dont understand why. here is an example of something i tried in terminal xrandr --output VGA --mode 1920�1080 --rate 50 i get warning: output VGA not found; ignoring.many other things i have tried come up with command not found .
View 4 Replies View RelatedI'm unable to reset using either the reset option in gnome shell or the command using a terminal. When I select it the shell exits and displays the graphic "exploding" and then it just sits there. Shutdown works fine; just no reset. Any ideas? I've installed from the DVD. I booted the live CD and it resets just fine so I know it's no my hardware
View 1 Replies View RelatedWhenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
View 9 Replies View RelatedI installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
View 5 Replies View RelatedMy screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
i download the rpm package of gcc .
View 10 Replies View RelatedI have just bought a new Acer 23" 1920x1080 flatscreen. I used to have an old fashioned 1280x1024 flatscreen.Now the problem is, every single time when I log on Ubuntu resets my screen res. to 1280x1024. So every time I have to use the Nvidia Settings to set my screen res to 1920x1080 and every time I have to place my panel widgets back in the right place and order, because of that, which is quite annoying.GDM has no problems though, it always displays in the right resolution.I use a Nvidia GeForce 6200 graphics card and the nvidia-current driver on Ubuntu 10.04 i386. I cannot use the Gnome monitors manager to set my resolution. Every time it sends me to Nvidia Settings.This is my Xorg.conf;
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
[code]....
I just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
View 3 Replies View RelatedI recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies View RelatedI have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
I've a program that launches new processes, and wait for them to die before it exits. So, for example, my program is a process, and it launches 3 more processes, and when the 3 child processes end, it will exit.
As you see, at end of the example, the program used a total number of 4 processes.
1 - Now, I'm running this program in a CPU with 4 cores. This means that the program used each core for each process?
2 - How can I know which core the program used?
I mount my Fedora AMI on my EC2 account, when I reboot the system, the passwords for ec2-user and root are changed.On the web I found that is a "feature" .
View 1 Replies View RelatedI want to remove fedora core 6 & that is all
View 14 Replies View RelatedIm trying to dual boot windows xp on my computer already running fedora core 6. I have some experience with dual booting- i had a windows xp laptop, and now it runs both windows and ubuntu. Ive done some reasearch, but still not clear on how exactly I should go about dual booting xp on fedora.
I forgot to mention above I do not have internet access on that computer. I do, however, have a laptop (windows xp) that i can download things on and burn on a disc if needed. it has internet. If you know of any solution to run programms such as visual studio and dreamweaver on linux which dosnt require dual booting(i tried wine but didnt work for me)
I know that Windows likes to store files according to Gibibytes, but why is Fedora Core downloading in an MiB format? Is that Mibibytes?
View 3 Replies View RelatedI need to upgrade one of our systems from its current distribution, Fedora Core 7, to the most recent version distribution, release 5.4, of the CentOS operating system. Can I do an in-place upgrade of the operating system without any adverse side-effects? Are there any issues that I should be concerned with before proceeding?
View 10 Replies View Relatedi have a own internet cafe that use a Fedora Core 8 as a dhcp and proxy server, and i had two normal users that created in my server to monitoring the billing of client who use the internet. But was delete those users and create a new one and restarted the server. and the problem is when booting process running suddenly hang and cannot continue but the server doesn't showing any errors and cannot continue the booting process.....
View 14 Replies View RelatedThis is my first post and I figured why not start it off with a question!
First off, thanks for this site, I have a LOT of reading to do!
Secondly, my question is, what is the easiest way to upgrade my live server from Fedora core 4 to Fedora core 14 (latest stable version).
I have a box that is live with a couple of small active forums on it where the upgrade would take place.
I want to upgrade my box to stay up to date with the latest release of Fedora linux to take advantage of any enhancements or security fixes that has been implemented since version 4.
My box is colocated at a data center. Would it be best to upgrade from a CD or remotely? I have read there is quite a risk upgrading the OS remotely and some issues like broken files or dependencies could occur.
I have been sat in front of this PC for hours now trying different ways to get Fedora Core 12 to automatically login. This hangs it up at the splash screen
etc/gdm/custom.conf
[daemon]
AutomaticLoginEnable=true
AutomaticLogin=*username*
[code]....
Im running fedora core 12 and when i start it goes to the GUI but i would want to start from the shell how do i go about it to redirect it there
View 4 Replies View Relatedi cant find any threds in this forum how to make raid 5 on fedora core 10 how to make 1?
View 1 Replies View Relatedjust did Red Hat Linux (Fedora Core 2) install. It's the only OC on the machine. Boots and everything seems to work just fine. Everything but the operator, that is!
I want to install FireFox and Thunderbird and AVG (free) antivirus so I first went to the Mozilla site for a download, only to discover that the best way to install is as part of a Package Manager.
Fair enough - but what is a package manager? Part of the distro? Where do I get one for these items?
UPDATE - I figured out the Package manager thing and no , FireFox is not an option, nor is Thunderbird or any antivirus.
If I can't get a package manager, the site tells me that I can install with me as the only user by downloading and typing in a couple of commands (Unzip and run, I think). But I get a report that I need a something or other file (library?) for it to run. How do I find that file and why would I be the only user? Surely as root I can set it up for all users can't I?
I guess the short(er) question is: How does a new user download and install a program onto a new setup without a package manager?
Question 2 - this install is for a class and the instructor wants screen prints as proof I'm doing certain operations. How do I get a screen print of, say, a history listing and can I save the screen print or view into a file for submission?
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
When I compile a C program in Fedora Core 12 using the following format: gcc -o program -static program.c
I get an error:
What do I need to do to make the program compile correctly with the -static flag ?
I am using HP G62 Notebook running i3 with intel(R) HD graphics card. I have installed fedora 13 and the display is not so good as it used to be when i used my old laptop and desktop effects require me to have 3D acceleration.
View 3 Replies View Related
