General :: How To Increase Hard Disk In System
May 31, 2010I have created a linux machine in virtual box now i want to add some hard disk space into it.
How would i do this. code...
I have created a linux machine in virtual box now i want to add some hard disk space into it.
How would i do this. code...
My computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View Relatedi just installed ubuntu 9.10 onto my windows vista laptop. i ran ubuntu update manager but it tells me i'm low on disk space. system monitor tells me that i still have 50.2 GB of space but the problem is that i only have 68 MB left in my / File System. how can i increase disk space in / File System?
View 3 Replies View RelatedI have been running Ubuntu as my sole OS for about a month now, and aside from Computer Janitor, I have found no drive/fs cleaning tools, or defragging tools. I know this isn't Windoze, but surely there must be a way of maintaining your hard disk. I mean installs/uninstalls must leave detritus, and file moving must cause SOME fragmentation. Are there any apps, systems or methods in place that provide this functionality?
View 3 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedIf you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
I created the disk and now I would like to increase its size. I know I could add a new one, but I don't want to.
View 1 Replies View Relatedmount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View Relatedwhich OS system is better for pc with 1GB ram and 80GB hard-disk
View 9 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI have two systems, both having file systems running on LVM. System No 1 has 2 PATA HDD (40 and 80 GB) running linux on LVM. System 2 has a single SATA HDD (300 GB) which again uses LVM. What i was trying to do was to add the two HDD in system 1 to system 2, possibly with little or no data loss. So i connected the PATA drives from system 1 to system 2 and booted up. The system booted up to the openSUSE 11.3 splash screen and stopped after scanning the HDDs. Frankly i never expected openSUSE to try n auto mount the new drives. I think the problem was caused because both the systems had VG and LV of the same names. Can the volume group be renamed, maybe from a live CD or somthing?? System 2 is not boot able now.
View 5 Replies View RelatedI've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
I have never used Linux before and know nothing about it . But my cousin installed a Fedoro linux CD on my laptop which previously had Lotus symphony . Unfortunately my laptop had single partition and so Linux overrode the old OS ,ie lotus symphony .
I have some critical data on my hard disk but I have no clue how to take backup this data using Linux . I desparately need this data .
Could somebody let me know how I can access this data and take the backup ?
server is :intel 5000p ,2gX4 ram ,cpu 5405 X13 sata sda 500g sata use for system rootfilesystem primate mastersdb 500g sata use for data filesystem second mastersdc 500g sata use for data filesystem second slavebios set use enhance and ide i install centos5.4 x86_64 on sda when i install system on sda, sdb and sdc is offline.after system install sucess ,poweroff and add sdb and sdc when system kernel start report ata0 error or ata1 error. exp XXXX (rydy).but when only add sdb or sdc ,system can startup and use all service ,exp vncserver ,kvm,pptp..
View 2 Replies View RelatedI am trying to port the current Fedora4 system to the CentOS5 on a new hard disk. Actually, the Fedora4 system is constantly being hacked due to my lazy update. So i prefer a fresh install of CentOS5. I am not clear what files need copy and what does not need for ease and for avoiding possible backdoors.
View 5 Replies View RelatedI was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
How do I adjust the dpkg --get-selections >installed so that it tells me about a linux installation that is not active. Currently I can not load the original installed Ubuntu on the HD and am using the live CD. How do I extract the list of installed applications for the system on the hard disk
View 9 Replies View RelatedI've surprisely recognized that it's possible to write a filesystem on a hard disk without any valid partition. Well, the general advantages of partitions are clearly. But what are possible disadvantages or limitaions if you don't use a partition (e.g. if you want to use the complete space as one volume for data mining or so)?
View 14 Replies View RelatedThis is a good way to backup my current system:
How to backup your system to restore your server incase the hard disk is damaged.
i accidently modified my file system of some partition in my hard disk from ntfs to fat...i havnt formatted the drive...but now i cannot mount this partition...
View 1 Replies View RelatedFor our workgroup I set up a server which is basically 10.04.2 with kernel 2.6.32-32-server on a SSD and all the data on a RAID 5 consisting of 4 2TB hard disks, thus a maximum of 6TB space for data on the RAID. Having multiple users with different amounts of data from different scientific data source I set up an lvm on top of the RAID
--- Physical volume ---
PV Name /dev/sdb2
VG Name home-data
PV Size 5,45 TiB / not usable 3,00 MiB
[code]...
Here is the problem: The volume Genomes (or /genomes) is half full
sudo df -ah
/dev/mapper/home--data-Genomes
1,9T 850G 920G 49% /genomes
but the system states it as full whenever I try to add more data (tried cp and rsync). There is no quota set to the volume (I have quotas in place for users home folders. These are only for max amount of disk space, not max file number, and I am still able to move/add files elsewhere so there seems to be no interference).
I opened this thread in Ubuntu forums with no luck at all. Hope someone can give me a clue of what happens.URl...Recently, gnome has been warning me about low disk space, always less than 1.5GiGs. The problem is, baobab (disk usage analyzer) tells me that there are something like 50GiG free. I am sure that I have the free space ( I can write big files ) but the system keeps reporting low disk space.
View 4 Replies View RelatedJust installed Linux (Ubuntu 10.10-net book-i386) on an acer 5310 laptop, everything is working great except for the internet. Google home page takes over a minute to load on Firefox, the actual search results takes only a second but then it takes 2 or 3 minutes to load any site i click on. I have broadband, only 1mb, but it worked perfect on the previous OS, also using Firefox.
View 9 Replies View RelatedAs a thin clint mode is possible on ubuntu ? like windows clint system login on to the server without hard disk...
View 1 Replies View RelatedI would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
I have sony lap with 320 Gb hdd with 3Gb RAM with windows 7 home basic running on it.Through Ubuntu website i downloaded the Windows installer[WUBI].At first it asked about the disk space i allocated it as 12 Gb..Now i want to add more hdd space to it..Right now i have avaiable spave is 7 Gb free i want to incerase atleast to 20 Gb ....How should i do...
View 3 Replies View Related