I've burned about a dozen disks and they all tell me disk error I really wanna run a dual boot and I used this to partition my hard drive with this EASEUS Partition Master 4.0 Home Edition and burned the disk with this InfraRecorder and then went to reboot and press F11 for boot order.I can see the boot screen and thats when it says disk error.
View 2 RepliesI have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies View RelatedI'm getting a HDD Lock screen or Disk Controller Failure at boot up. (Compaq Armada) The HDD stops the system dead. The controller failure will allow me to boot Fedora or Puppy from the CD drive.
View 1 Replies View RelatedI have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies View RelatedI'm trying to install ubuntu on a windows vista pc from a usb which I have saved ubuntu on from another linux computer but every time I select the usb drive to boot from in bios all I get is "disk error press any key to restart" on both windows and linux machines, any ideas on whats wrong?
View 1 Replies View RelatedEdit: This is somewhat inaccurate, please see post #16 on page 2 for my actual situation
I'm more than a little confused by this. A little while back I had to reinstall my machine because I had a hard disk failure and I replaced my primary drive.Everything went perfectly smoothly, but then a couple of weeks after that when I rebooted, it dumped my into the grub rescue console
Code:
error: out of disk.
grub rescue>
So, I found a solution to the problem on these forums, rebooted perfectly fine, and thought everything was fine. Until the next time I rebooted, when it happened again. And now, every single time I reboot, I get the same issue.I have to do the following, each and every time I want to reboot - and i'm at a loss to explain why grub is borking itself every time.Boot off a live cd.Open a konsole window
Code:
sudo su -
mount /dev/sda6 /mnt
mount /dev/sda1 /mnt/boot
mount --bind /dev /mnt/dev
[code]....
when it comes to disk and volume management in linux, I'm attempting to install a new 1TB disk to remove the current 250GB disk, the system also has a 37GB disk.
What I did was that I added to new 1TB disk to the system with the LVM tool, I added it with a mountpoint of /storage2. Then I removed the old disk with the LVM tool and moved it's data to the remaining disks (the 37GB and the new 1TB) with the LVM tool.
Everything looks ok so far.
When I reboot with the old 250GB disk still in the system it's all fine. But when I remove it, the system won't reboot. I get to the point of where the fedora screen usually turns up.
The old disk had 2 partitions, the new one has only one, I'm starting to think there's something in there causing the issue? Can't load that big partion at boot or something?
If I'm missing to fill in some details, just ask and I'll try to answere. I now has the old disk back in the system to be able to boot.
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies View RelatedI downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies View RelatedI've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer. The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading
error: no such disk
grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem. The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer.
The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading
error: no such disk
grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.
I'm a noob to Linux. I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem.
The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
I've downloaded Ubuntu 8.10 and I have installed it within ms windows. My first problem was when I went to boot Ubuntu and the graphics weren't right so I rebooted it with a different graphic configuration and it installed successfully. When I went to boot Ubuntu a second time to actually use it I got the following error:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
I have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.
Here's some info:
Code:
I can't get Ubuntu 10.04 to boot for install (to my desktop), it displays the logo then hangs for about a minute and displays the alert dialouge saying "Boot disk error."I've tried multiple CD-Rom drives, burned from multiple computers, with both the desktop and server downloads. I'm down about 10 CDs and 2 DVDs here I've checked their integrity (md5) as well as checked the disk integrity from another computer (laptop) and everything passed. I got xUbuntu to install effortlessly, so I don't know what's causing the problem for Ubuntu. I can even look at the contents of the Ubuntu Server CD from within xUbuntu -- so, I know the disk really should work.
My system specs are pretty basic:
2 x Xeon 2.0Ghz
Tyan S2720 Motherboard
2 Gig (4x512) ECC PC266 RAM
[code]....
why xUbuntu worked and regular Ubuntu won't, and/or maybe what I can do to fix this?
I am a long time Windows user and attempting to install Ubuntu Netbook 10 on my Acer Aspire netbook.I followed the steps:1) Downloading the Ubuntu ISO to my netbook hard drive.2) Installed Ubuntu from the netbook HD to USB using USB universal installer (also using the universal installer to format the USB)3) Set bios to first read USB deviceI receive the following message during the boot "Invalid system disk. Replace the disk, and then press any key.I have retried this process several times.
View 2 Replies View RelatedI was using the disk utility on Ubuntu 10.04 and wanted to make by 500GB external NTFS formatted USB drive into 1 x 50GB FAT32 and 1 x 450GB NTFS. I clicked the option that said format or create a partition and it basically wiped the whole thing in a split second leaving me with 500GB of seemingly empty space. Obviously the files are still there but I cannot boot the drive to view anything. I have downloaded testdisk, but don't know how to use it, but I am sure there is a relatively simple solution here. I am currently repairing the boot sector of the drive as Test Disk showed the drive as "no type" i.e. not FAT/NTFS/ext4 etc., but shows the correct amount of used space though, but I cannot view anything err go, I cannot use the undelete command as yet.
View 2 Replies View RelatedDownloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
Currently I'm running 3 operating systems on my machine (in order of installation); Windows XP, Windows 7 and Fedora 14. Unfortunately, after I installed Fedora I'm no longer able to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error:
Code:
Error 21: Selected disk does not exist
To provide more info, here is a boot info script result:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for /grub/stage2 and /grub/grub.conf.
=> Windows is installed in the MBR of /dev/sdc .....
mdadm: No arrays found in config file or automatically
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies View RelatedMy system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
I'm trying to install ubuntu from a disk I got with a Ubuntu manual magazine, but once I choose the install option, the logo glows for a couple minutes then freezes and nothing happens. The same happens for running it without installation. Does anyone know what I should do? I'm currently downloading it onto a USB stick to attempt to boot it from that.
View 4 Replies View RelatedI dual booted xp home ed with ubuntu netbook remix10.4 and in the grub loader (i did side by side install) it shows xp at the bottom (after ubuntu, ubuntu recovery mode, memcheck64 , xp
All of the loaders work fine (ubuntu loads fine, im typing this from ubuntu.) but xp will just say: Disk Read Error. Press Ctrl+Alt+Del
One hard drive is partioned 500GB HD ([440gb XP partition] + [60gb ubuntu])
Last night when I turned on my lap top (5 year old Acer TravelMate 4650), it was not able to boot up (10.04 LTS). No system files could be read and a lot of error messages was displayed. In fact, it has done a few checks for disk error lately during boot up, but no further warnings given. I gave up recovering, and simply re-installed Ubntu 10.04. I was wondering if this could be related to a virus attack?
View 9 Replies View RelatedDownloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
I just booted ubuntu from a disk that I burned to try and salvage some files off a hard drive with a failed boot sector (maybe. not sure what the problem is,). Anyway, I can see the files, and I have a large portable hard drive that I can use (a MyPassport 320gig, if I recall correctly). I'm having trouble accessing the drive, and I think it might be because there's something popping up in the task bar that I can't see. Unfortunately, I can't see the task bar! My screen's resolution is off, and I'm having trouble adjusting it. I browsed the various settings and I couldn't figure out any way to change it.
Is there anything I can do? EDIT: Oops! I didn't look into the Monitors options... how embarrassing.
EDIT2: Okay, looks like I can mess about with the resolutions, but all of them still deny me access to the full screen - still can't see the task bar.