I have installed ubuntu server 10.04 on a virtualhost. I have installed webmin fine.
When I try to access the webpage from my web browser the webpage cant be displayed.
I have attached the output of ifconfig.
I installed ubu server 9.10 on my desktop, then I tried to install webmin and I was able to do that too. When I try to connect to webmin I get "page cannot be displayed" so I thought let's change the port...I changed to port 443 as recommended on the website.
Here is the miniserv.conf:
port=443
addtype_cgi=internal/cgi
realm=Webmin Server
logfile=/var/webmin/miniserv.log
errorlog=/var/webmin/miniserv.error
pidfile=/var/webmin/miniserv.pid
logtime=168 .....
Now I tried connecting using the ip address and the hostname. I also tried with http and https
https://hostname.com:10000 and 443 ... no go.
i try to access my webmin but it give me "This webpage is not available." now, webmin is useless for me if i want to uninstall webmin, is some other application will affected (like apache, mysql, etc) ?
View 9 Replies View RelatedI recently started with Amazon's EC2, and it's been smooth sailing up to this point. I installed the official EBS AMI ( ami-714ba518 ) for Ubuntu 10.04 and installed LAMP, etc. All this worked fine. However, Webmin is a bust. I cannot fathom why I can't get Webmin working after adding the webmin repo and installing via apt-get. This worked just fine on my physical server, but on Amazon it gives me "Firefox can't establish a connection to the server at xxxxxxx:10000." I made sure my security group allowed port 10000 through to my IP, and MySQL client connections work fine, so that can't be the problem.
View 9 Replies View RelatedIm having issues to connecting to my network and it continues to not connect and keeps saying that webpage cannot be displayed....i have other computers here that connect just find....i was wondering is there a command like ipconfig or something
View 1 Replies View RelatedI have set up a mapserver, everyting is working except no map is displayed, it looks like a problem with the tmp folder where the images should be writing to. I have searched for a solution and it seems that the user group needs to be www-data, however on my system apache is set as root not www-data and www-data does not exist as a group. Can I simply create this group? if so how?Then I assume I just do the following:
sudo chgrp www-data [path]/tmp
sudo chmod 755 [path]/tmp
sudo chmod g+s [path]/tmp
[code]...
I have a proxy server (squid-3) that I would like to setup Dansguardian to do additional web filtering.
The system:
Ubuntu 10.10 - all updates as of today
Dansguardian - 2.10.1.1-2ubuntu0.1 (latest update)
Squid3 - latest update (not squid 2.7)
Webmin - 1.530 (all updates)
Webmin dansguardian module - 0.7.1
Ok - I have all of the above installed. When I go to the DG module page in Webmin, I get the following:
Warning - the version of DansGuardian you have is not supported by this Webmin module version
Webmin Module Version 0.7.1 supports DG version 2.10 (& 2.9)
Currently installed DG version
This obviously makes no sense, since I am running DG version 2.10.1...
PS. I have squid installed, but not configured (still tinkering) - could this be the problem? That squid needs to be running for DG to work?
I encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.
When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:
I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]
Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.
I tried creating a virtual server in apache and it got created successfully. (I also added a zone in dns for that domain successfully) However, when I try opening that domain in my browser, I see a popup window which asks me what to do with "default" which is a php file type.
I dont see the index.php which should actually open. What do I do to make the php files display correctly?
I'm just getting familiar with my new VPS. I have webmin installed. I'd like to host more than 1 website on my server and I just can't figure out how to add a new domain (addon domain) to my server.
View 1 Replies View RelatedWebmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.
Sites:
[URL]
I have just done a fresh install of server 11.04 32bit.I installed webmin. I can hit webmin , but it doesn't take my login. I tried with both my users but it refuses to log me in as if my username or password is wrong.
View 5 Replies View RelatedI put together this 500+ page .pdf how-to, if your looking to setup a server, and manage it with Webmin. built on Debian, but should work here to for the most part[URL]..
View 9 Replies View RelatedI was wondering if I can use a different port for WebMin down below 1024 where I forward ports to my Linux box, rather than the current 10,000.
The reason is I forward higher ports to the Windows machine at present.
The goal is to keep Linux services down in the low port range. Suggestions?
I am planning to setup my own webserver using webmin, but from what i've read i apprently need two harddrives. one for the OS & one for the data. can i just partition my harddrive into two because i dont have another hdd lying around. i also just want to note that this is my first time trying to do something like this sooo I rly want to try to set up my own server . As a side note ill list the specs of the comp i plan to use as a server. Pentium 4 2.8ghz, 1gb DDR, 80GB 7200RPM HDD.
View 7 Replies View RelatedI want to make a daily backup of my websites from ubuntu server over ftp to another server I own. Backup schedule and process works, the problem is backup restore. Winrar says: The file is corrupt, 7-zip crashes.
Backup archive looks ok (the same size as original folder) and you can also extract it ignoring the error by winrar. But the extracted folder only contains one or two subfolder and one file(usually image) and that's all.
If I try to restore from Webmin it doesn't report any error, and it looks like restore worked. But restored files are nowhere.
I've got an old computer around that I've put Ubuntu server 8.04 on.At the moment, this is only a little hobby of mine purely for educational purposes. (Great for learning Linux!) After using this tutorial:URL...for setting up a LAMP-server, I'm trying to figure out is whether or not setting up a root-password is necessary or not. I think the tutorial is really great for a newbie, but it consistently uses su instead of sudo.I'm aware of the fact that setting a root-password isn't recommended in the documentation, but don't you need a root-account to be able to run tools such as webmin?
View 8 Replies View RelatedI am using ubuntu 10.04.3 LTS and I have webmin 1.560 installed but when I look at Un-used Modules its showing system log is there and when I click on it I get this: The syslog configuration file /etc/syslog.conf was not found on your system. Maybe syslog is not installed, or a newer version like syslog-ng is in use, or the module configuration is incorrect.
View 2 Replies View Relatedi'm not able to play music at all. videos videos seem to crash my browser and using either rhythmbox or banshee they crash too.i ran rhythmbox by typing sudo rhythmbox and tried to play a file and it displayed a pop-up window saying that my autioaudiosink element is missing and the terminal displayed this:
code: (rhythmbox:8415): rhythmbox-warning **: unable to grab media player keys: could not get owner of name 'org.gnome.settingsdaemon': no such name
warning: unhandled message: interface=org.freedesktop.dbus.introspectable, path=/, member=introspect
[code]....
Instead of XAMPP or LAMP, I installed a local web server to my Ubuntu 10.04. Apache and phpmyadmin works well.
I copied the files of my Joomla website to /var/www folder. When I go to administrator panel, it works. But when I type in the browser "http://localhost/[folder_name], a blank page appears and nothing else.
I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
I would like to set up a proxy server at home which i can use to access sites from work. I was thinking a web-page i log into and then a sort of use like a browser? like this for example, but where i can have a secure login
View 4 Replies View Relatedi want to make a webpage so that only people on my network can see it. how do i do this
View 9 Replies View RelatedCan someone point me in the right direction for adding SSL to a webpage?I've installed Phpmyfaq, on an Ubuntu 9 server, but I want to set it up so that logging in is done securely.
View 1 Replies View RelatedI am trying to setup a virtual machine server as a web development environment. Install and setup is going correct. To avoid any accidents I have the apache alias set to www.example.dev instead of www.example.com. The URL will redirect no problem but I need to find a way to have every instance of a link (example.com) show up as (example.dev) so that whole site will function on the server without linking to the live external site. I'm using git as a version control system that will push certain commits to my live site and thus want to avoid changing any configuration files to get this desired effect on my virtual machine. How to do this server side, maybe via PHP, apache2.
View 4 Replies View RelatedI've been trying to figure this out... What command does the system use to display this at login:
Quote:
System information as of Fri Oct 1 08:35:54 CDT 2010
System load: 0.28
Usage of /: 10.8% of 17.89GB
Memory usage: 51%
Swap usage: 3%
Processes: 112
Users logged in: 1
IP address for eth0: <ip.address>
It's not uname, free, top, df, uptime, etc... Also doesn't appear to be anything in /proc that I've found. Anyone know what it is? I want to grab its output as part of a script. I could use other commands I suppose, but this system info output is neat and concise.
I'm having trouble with Webmin. I got it up and running. However, I was changing the 'listen on port' to something other than port# 10000. I made sure ufw was open to the tcp requests on my new webmin port only. UDP has been disabled. I type in my browser my ip address with the new port, and I get 'problem loading page' now. How can I see the tcp port webmin is set from a terminal on the host computer? Do I goto a webmin folder and change a .conf file?
View 4 Replies View RelatedI just made a script to install a Transparent Proxy with DHCP Server, Content Filtering and Webmin. It installs and configures the modules and starts them. I can use from two to five interfaces (eth0, eth1, eth2, eth3 & eth4). I've tested in 8.04 to 9.10 and works fine. It does not configures BIND and IPTABLES, just install all the modules needed for a transparent proxy, and configures DHCP, SQUID, DANSGUARDIAN and WEBMIN for Ubuntu. I did it because mostly all configurations I do are transparent proxies.
What does:
1. Installs many packages needed for transparent proxies, and webmin. Also installs perl modules needed.
2. Configures default Squid settings for transparent proxies, and a better Dansguardian content filtering for public access.
3. Configures and fixes Webmin DHCP and Dansguardian modules to work on Ubuntu.
4. Configures DHCP Server subnets.
What doesn't:
1. IPTABLES and BIND. You must configure both manually. IPTABLES can be configured with Firewall Builder or other firewall tool. BIND can be configured using Webmin or the CLI.
2. Configures /etc/network/interfaces. You must configure all network interfaces correctly. Any mistake can screw the automatic configuration.
3. Dansguardian Blacklists. You must use your prefered blacklists. I use URLBigBlacklist with a modified script to work on Ubuntu (downloaded from Danguardians' Extras and fixed up to work on Ubuntu).
4. Check the script if there's something missing.
I've got my first EC2/cloud instance of Ubuntu up and running. This is my first time really dealing with the server edition. I've loaded Apache, Tomcat, PostgreSQL, and Webmin. I've got a public IP on the instance and it is working. I've opened, for now, ports 80, 8080, 443, and 10000 to 0.0.0.0/0.
I cannot get into Tomcat Manager or Webmin at all through a browser. For Tomcat, I've restarted, stop/started, and verified that Tomcat is running. I installed Webmin all through apt-get commands so any dependencies should have been installed (first time doing it this way), but cannot get to the login screen. But if I just go to the IP, Apache goes to the "It Works." splash page. Did I miss some set up? Is there an internal firewall in Ubuntu Server edition that needs to be set?
when I connect to Webmin using [URL], I cannot get the File Manager Java applet to work. If I connect from within my LAN using [URL], the applet works.
View 9 Replies View Related