I have an xml file that is similar to this.Suppose that this file name is Example.
<PMID>10605436</PMID>
<Year>2000</Year>
<ArticleTitle>Steroids</ArticleTitle>
[code]...
the command acpi gives me the percentage of battery that my laptop has.I would like to print the result of acpi in the hardstatus line of "screen".
View 5 Replies View RelatedI have the following commande /sbin/fuser -f -u /u/DT01/F010107 1>/tmp/null 2>/tmp/seausr.T0069 when executing as root 'su' this give me all user using the file. but when tried with 'sudo' i am asked with 'user password'. Is ther anyway to simply get the result without having to supply a password and to see all user not only me. (i have the file open also).
View 1 Replies View RelatedIs there a command line option that will allow less to return to the command line if there are not sufficient lines in the file to warrant paging.
View 1 Replies View Relatedi am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!
View 1 Replies View RelatedI am trying to get 2 things to operate on the same line, for example echo Current Version: [cat /file/ver.txt] is there a way to do this?
View 1 Replies View RelatedI need some plugin for Gedit (or maybe other HTML-editor) which will make tags of words, like: I type "div", hit some hotkeys or anything else with keyboard and get "<div></div>". The same with all the words I type in. Do you guys know which piece of software can do such things?
View 2 Replies View RelatedI have a lot of avis with annoying metadata that show in vlc. Since I cannot figure out how to configure vlc in a way that it won't show the tags, ffmpeg should strip the tags. This is supposed to do the trick:
[Code]...
I want to make a program that maintains a list of tags that can be attached to a set of files. Store the tags in the files. The main problem is that there is no way to get a list of all the tags without reading each and every file. And also what if you have an unused tag? Have a file that contains tag "keys" and file list "values". This seems like it would be fast and effective, but what if one of the files gets renamed?
View 12 Replies View RelatedI installed Fedora 10 on a pc I built from a barebones package, I have had no problems over the past couple months until recently. When I start up the pc the OS lags on a black screen with the cursor blinking. I have searched forums but I guess since I am a newbie I am still lost in the translations. What I am trying to do is save my files that are on the pc to a DVD-RW or my external hard drive before I have to reinstall the software again.
My questions are as follows:
How can I locate the files on the hard drive? When I have the bootable cd-rom inserted I am unable to locate the HDD. How can I transfer my files using the command line prompt? Finally, is it possible just to upgrade to the latest Fedora without losing my files and going through the data recovery process head ache? Or can I reinstall the OS and not lose my files?
i would like to add 8 bytes of data to the begigning of a binary file.is there a command for this?
View 2 Replies View RelatedNow, I use Fedora Core (version 8) with core linux OS 2.6
I have some file data with size about 2G and I want to burn (write) this file to DVD rewrite.
I know linux OS can install software to burn data to DVD, but I don't have permission to install more software. I only use command line over Terminal (Gnome Terminal).
I don't want my Firefox browser to store anything in a cache. Is there a way to shut the cache off?
View 6 Replies View Relatedin my php page they ask the user to enter some input example like year. i want that input to be transfer into my .sh file and will show its output. how to make .sh file receive data from php and php sent data to .sh file
View 1 Replies View RelatedHow can I do to make less not to do line wraparound? That is, if there is a line exceeding 80 chars, I want to see only the first 80 ones. Of course, if I wish, I would afterwards be able to see the rest of the line by pressing the End key.
View 4 Replies View Relatedi'm not able to play music at all. videos videos seem to crash my browser and using either rhythmbox or banshee they crash too.i ran rhythmbox by typing sudo rhythmbox and tried to play a file and it displayed a pop-up window saying that my autioaudiosink element is missing and the terminal displayed this:
code: (rhythmbox:8415): rhythmbox-warning **: unable to grab media player keys: could not get owner of name 'org.gnome.settingsdaemon': no such name
warning: unhandled message: interface=org.freedesktop.dbus.introspectable, path=/, member=introspect
[code]....
How to parse the bunch of values displayed by the socket program into the php file so that further it can be displayed in HTML page
View 1 Replies View RelatedMy mouse wheel scrolls 3 lines at a time !
I tried this, it didn't succeed.
I use a program which makes a large image which I have to scroll to view. The program has no way to save the image, and I have no access to the source to modify it. The only way I have to get the image from the program is by screenshot. My goal is to save the full size image without having to piece together individual screenshots. I'm using this script to try taking a screenshot:
#!/bin/bash
window=$(wmctrl -l | grep "Program$" | awk '{print $1}')
wmctrl -v -i -r $window -e '0,0,0,6030,5828'
wmctrl -i -a $window
import -window $window ~/Desktop/screenshot.png
This uses wmctrl to get the window id ($window) for a window named "Program". It then tries to resize the window to the desired dimensions. It uses imagemagick (import) to save a screenshot.png on the user's Desktop. All of this works except the resize step. I can resize the window using wmctrl -r -e, but sizes greater than the screen size don't work. I'm using Ubuntu 10.04 and the Gnome Desktop. I run two monitors, but I've tried this with one of them disabled. Is there a way to resize the window larger than my screen to get a huge screenshot?
Part II: I tried using xrandr to set up screen panning, so as to have a bigger desktop than my monitor. xrandr --output LVDS --panning 2600x2500 This command makes the laptop screen pan over a 2600x2500 size desktop, even though it can only show 1440x900 at one time. To turn off the panning, I can use a similar command to set total size and with zeroes for the panning section. This gives me back my original laptop display behavior. xrandr --fb 1440x900 --output LVDS --panning 0x0 This is all done with xrandr, and does not require any Xorg.conf changes (my Ubuntu system doesn't even have an Xorg.conf).
My video card seems to only allow about 6.5 million pixels, even though the maximum dimensions are 8192x8192. That maximum seems to be the maximum for either dimension, but there is a limit to how many pixels can be drawn, which is the width multiplied by the height. Once I did the screen resize, I tried my script again and got a screenshot. The screenshot however is totally scrambled. I'm not sure if it's unable to take a screenshot of an off-screen window or if it is unable to handle the large dimensions of the window. With the panning display, the window should think it is visible, and the window manager should think it is on-screen. So there is a pixel buffer somewhere with those pixels in it, so there should be a way to get a screenshot.
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies View RelatedI wonder how to arithmetic operation of our data file using any script program/command (like sed, cut,awk)for example my data.file is:
45 65 42
12 23 61
43 34 21
I want to multiply first column with 2 and add second column with 3 then it become
90 68 42
24 26 61
86 37 21
I have a lot of mp3 files without any ID3 tag information. This is very annoying, because my iPod does not show them correctly. My Banshee shows them as "unknown artist" and the title. I would like to find them all in a bunch to batch update them.
View 2 Replies View RelatedI currently have 3 500GB drives, 1 is my OS drive with Ubuntu 10.04, and the other two have been setup in a software RAID1 (mirror). I would like to resize my Ubuntu partition and install FreeBSD to try it out. How can I make sure that my software RAID1 is recognized and make sure no data is lost?
View 2 Replies View RelatedI have an Ubuntu Linux on a VMWare running and I've installed RPM Package Manager. However when I try to query all packages using the rpm -qa command, I don't get any results returned.
View 2 Replies View Related#!/bin/shLOOK_FOR="NTLMAuthenticationFilter"for i in `find ./ -name "*jar"`doecho "Looking in $i ..."grepjar -e $LOOK_FOR $idoneI wrote the script above, and try to find if there any file name LOOK_FOR exist in those jar,my quest is: grepjar -e $LOOK_FOR $ihere how can I check if there are any successful result , and output them ?
View 2 Replies View RelatedEvery time I need to find a file and then open it, I have to use :
find ./ -name **.properties. , then copy the result, and then vi "paste the result here" .
If I need to use a mouse, it can be a little trouble. So is there any better way to do this?
I have used cp -rl to copy a folder. When measuring the size of the source and of the result of the copy du -sl returns slightly different sizes, even though diff confirms that their content are identical.Both folders reside on the same hard drive, no modifications to any of them have been done between the copy and the measure. I found nothing in the documentation of du and cp which could explain the difference.
View 1 Replies View RelatedI want to store the result of wc -l as a variable so I can use it later in my script...so far unsuccessfully.
I have tried this:
set `echo awk '{ print $1, $6}' | wc -l` | echo $1
but it is far from working.
I'm trying to get my music folder into something sensible. Right now, I have all my music stored in /home/foo so I have all of the albums soft linked to ~/music. I want the structure to be ~/music/<artist>/<album> I've got all of the symlinks into ~/music right now so I just need to get the symlinks into the proper structure. I'm trying to do this by delving into the symlinked album, getting the artist name with id3info. I can do this, but I can't seem to get it to work correctly.
for i in $( find -L $i -name "*.mp3" -printf "%h
")
do
echo "$i" #testing purposes
[code]....
I'm trying to mv The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ into the real directory DJ Exortius. DJ Exortius already exists, so it's just a matter of moving it into the correct directory that's based on the id3 tag of the mp3 inside.
PS: I've tried easytag, but when I restructure the album, it moves it from /home/foo which is not what I want.
I have some music files (.mp3 and .flac) which have unmodifiable tags: After I change the tags, they revert to their original values automatically. It's not related to access permissions (using Linux) as in a same directory, with the same permissions, some files have modifiable tags and other not. Is there such a thing as "protected" or "unmodifiable" tags? Are there solutions to force modification ?
View 2 Replies View Related