General :: Permanently Mounting A Ntfs Partition?
Sep 4, 2010how can it be done?
I'm running 64 bit linux mint 9.
how can it be done?
I'm running 64 bit linux mint 9.
How to mount ntfs partitions into red hat linux. I'm trying to mount but not mounted that
View 8 Replies View RelatedWhat are the necessary packages for mounting NTFS partition on CentOS? i tried installing fuse-ntfs-3g but got a result saying its not available.
View 1 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I am trying to mount 3 NTFS partitions, but they aren't showing up in the /dev directory. If I fdisk the drive, the partition shows up, but nothing in /dev...
Here is the output of fdisk -l as well as the results of my attempt to mount the partition.
I have successfully mounted the NTFS partition containing win7 via Ubuntu.
I followed these 3 steps:
Code:
Now I have unmounted the partition and want to remount it again except this time so that it is mounted as Read-Only.
I am running 11.4 from a thumb drive,mainly because something is fishy with my main hard drive, but installation is not my reason for this thread (though I think fixing one problem will remedy the other). My winbloze install is short stroked with ~50gb for OS and ~200gb for media storage. I have no problem accessing the storage from windows, but I am unable to mount the storage partition under Ubuntu. I get the following error:
Error mounting: mount exited with exit code 14: Hibernated non-system partition, refused to mount.
Failed to mount '/dev/sda2': Operation not permitted
The NTFS partition is hibernated. Please resume and shutdown Windows properly, or mount the volume read-only with the 'ro' mount option, or
mount the volume read-write with the 'remove_hiberfile' mount option.
For example type on the command line:
mount -t ntfs-3g -o remove_hiberfile /dev/sda2 /media/Laptop Storage
When I run that command, I get this:
su: invalid option -- 't'
I want to mount ntfs partition in rhel5 I searched a lot in google and finally understood that these three RPMS are must to mount ntfs partition in rhel5. My kernel version vmlinuz-2.6.18-53.el5. As per instructions in the net I downloaded these rpmms
fuse-2.6.5-1.el5.rf.i386.rpm
fuse-ntfs-3g-1.1030-1.el5.rf.i386.rpm
fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
First and second rpms are installed successfully but third is showing errors saying
rpm -ivh fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
Failed dependency
/boot/vmlinuz-2.6.18-53.el5 is needed by fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
But I copied vmlinuz-2.6.18-53.el5 in /boot even though it is saying dependencies missing
#rpm -qa | grep kernel
kernel-headers-2.6.18-53.el5
kernel-xen-2.6.18-53.el5.
#modprobe fuse
FATAL: module fuse not found
#uname -a
Linux server2.vth.com 2.6.18-53.el5xen.
My query is that why am unable to install the kernel module. Currently running kernel-xen-2.6.18-53.el5. I tried in another system above three rpms were installed successfully without any errors. What was the reason for my system.
Is it possible to use the 'discard' option when mounting an ntfs-partition? Because I'm buying an ssd and I intend to dual-boot windows xp (which doesn't support TRIM) and Ubuntu 10.10 (which does).
View 3 Replies View RelatedOn a clean install of Arch linux I edited fstab to be like so :
Code:
/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
I come from ubuntu, and, although they are all linux distros, they differ in a lot of things. Well, I just install the OS and I have a 1 TB drive for storage formatted in NTFS, I identified the device with fdisk -l, but the problem is Centos doesn't understand ntfs partition out of the box. Is there any package I need to install. I tried yum install ntfs-3g, but got an error: "no such package in repos,"
View 8 Replies View RelatedI have a dual-boot setup with winXP and openSUSE 11.2. I have both XP and SUSE partitions on a 160g HDD and then a Hardware RAID 1 array of 2 320g HDDs. The RAID arrray contains all my media/data files on an NTFS partition. For some reason SUSE shows both individual 320g disks mounted in the file system, but not the RAID array. If I attempt to browse either of the disks, I get an error and can't view them. How do I mount the RAID NTFS partition?
View 2 Replies View RelatedI was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View Relateduntil recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code:
Mountall mount /media/win7 [1089] terminated with status 21
My fstab has not changed but here it is:
Code:
/dev/fd0 /media/floppy0 vfat noauto 0 0
UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
I have Debian Squeeze installed. I have 3 different HDDs, one of them is SATA, the other 2 are IDE, on one of which I have the distro installed.
How do I mount the other 2 partitions? I see them in "Places" but when I click on them I get an error message "Unable to Mount <The name of the volume> Can not get volume.fstype.alternative".
I can see both volumes in /dev/ntfs. I tried doing
Code:
I have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
View 2 Replies View RelatedI know nothing about linux. But my friend says linux is good. So, I kept a copy of fedora core 10 i386. My fiend has a lot of movies about 100 in his ipod. So, I took it. It contains lot of viruses and I opened the ipod in windows but my windows has malfunctioned due to the virus. So, I have installed the fedora core 10 i386. I have some important information in the windows ntfs partitions. How do i mount those ntfs partitions.
View 8 Replies View Relatedi have a fc-7 machine kernel version (2.6.21-1.3194.fc7). i am able to mount the nfs share form a server. but every time when i reboot my machine. share will go off and again i have to mount the share.. is there a way to Permanently mount The NFS Directory , i mean after reboot share should not go....
View 3 Replies View RelatedI have installed three flavors of linux on vmware
1.rhel5
2.centos 5.5
3.fedora 14
and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error:
"fatal : module fuse not found"
"ntfs unknown file system"
I need to mount NTFS drive on RHEL 5.1. I tried NTFS-3g & FUSE as well, but still getting
FATAL: Module fuse not found error.
i'm well versed with the fstab but i'm just curious if there is ubuntu way
View 3 Replies View Relatedi have dual OS in my hard disk. win xp and rhel5. i used use ntfs partition too while working in linux. There is no problem until i enable selinux. When i enabled that, its giving some error at startup and left the partition unmounted. But manually i can mount after logged in. But i need it at the startup itself. How to solve this.i am installed dkms* dkms-fuse* fuse* and fuse-ntfs-3g* rpms to use the ntfs partitions.
View 4 Replies View Related I installed a new media drive that I will be using to share with a windows 7 laptop using samba. After days of frustration, I figured out that the sharing is not working because I have to set the permissions for the NTFS drive when it is mounted. Once it is mounted, using chmod, chown or right-clicking in nautilus does not work. As a result, when I try to access the files from my windows laptop, it keeps saying that it can't find the share (due to the permission issue). How do I change the fstab to automatically mount the ntfs drive, and have completely open permissions (read/write/execute by everyone)?
Code:
UUID=28ASDFGF4AABFA4 /media/media ntfs-3g defaults,blksize=4096,umask=0000
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedI am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
View 4 Replies View RelatedI have linux9 & windows xp dual boot.I want to access ntfs partition in linux9 please give me suggestion for same.
View 4 Replies View RelatedOn my computer on the first disk /dev/sda was installed win2k system bootable with
native win2k bootloader. I created imges of that partition using Ghost4linux na Clonezilla. Images were placed on the second computer using sshfs. For all this tasks i used PartedImage LiveCD.
I removed old partition and created a new ntfs partition on the same disk. When I used GParted or native Win2k partitioner the partition I get was smaller: the difference is a few bytes. Finally I used the Linux fdisk. Now the size was OK, but after restoration win2k was unbootable: I tried to recover the win2k but it was even impossible to locate a system on the partition. So I tried to move all the partition at the very beginning of the disk. Now at least I was able to mount (under Linux) the partition. But again win2k was unbootable and unrecoverable.
It seems for me that the partition is missplaced. According to Ghost4Linux the partition begins with an offset 0x56. I suspect that it should be rather 0x80.
ntfs-3g /dev/sdb1 /media/sdd7 ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 6 has no FILE magic (0x0) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
how to access fat and ntfs partition in redhat linux 5
View 2 Replies View RelatedI have tried ntfsresize with the partition mounted and unmounted, and get the same error message: Illegal new volume size. I have also tried many different volume sizes and all get same message.
View 12 Replies View Related