General :: Monitor Will Not Show Any Picture Except Distorted Green, Orange, And Red Lines?
Mar 23, 2010
I have an old Compaq Pro desktop with Ubuntu 8.04 installed. been using it without a major problem until four days ago. When I attempted to boot all I got was a screen with green vertical lines at the top and horizontal yellow, red, and orange lines below that. Since I recently had downloaded a new kernal I tried to use another kernal but that got the same result. I tried to boot with a live cd and finally got it to boot in low graphics mode. I have also tried to boot into the safe mode and tried the recovery option.got the following warning:xserver-xorg postinst warning: overwriteing possibly customized configuration file; backup in /etc/X11/xorg.conf .20100323151611I have no idea what that means or what I should do. Can anyone point me in the right direction? I would really hate to wait the 30 some odd days for 10.04 to come out.
View 4 Replies
ADVERTISEMENT
Apr 5, 2011
Guy Im having issues getting my NIC to work. I dont think the NIC is faulty because when I plug the network cable in I get the green and orange light and I get the below result when running lspci | grep net
Code:
:~$ lspci | grep net
02:08.0 Ethernet Controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (Rev 42)
[code]....
View 8 Replies
View Related
Jun 22, 2010
i am getting really pissed off with my new core i5 system I have a gigabyte p55m-ud2 mobo ([URL]) which's got a Realtek 8111D lan chipset it connected to my router after fresh install of ubun10 and then i installed MacOSX 10.6.3 and it worked there too then i came back to ubuntu and it didn't work anymore, after several restarts it was still not working until i took out the power cord and mobo battery, and reinstalled them back later which caused ethernet to work once again. but then after a while it started not to work anymore, which usually got fixed with a reboot. now this time i had ethernet working and i just resumed from screensaver and it stopped agian
there are no green or orange lights flashing at the back and when i take the cable out and reinsert it nothing comes on but with a shutdown they do come on i don't have this problem on the other harddisk which now has win7 and i some times manually change the sata cable to boot into windows and use itunes and some other stuff to load music to my iphone. I dont like to have dualboot and i dont like to use win7 either i just have it on the other hard disk just in case
is the manual switching of hard disk causing this to happen? why do i get it working with restart/shutdown and when i am using it fine it just decides to stop working after a resume from screensaver or sometimes for other reasons and why does none of this happen on win7 is there a way to reconfigure the ethernet drivers or other stuff without a reboot i am thinking it might be a problem with network manager or a bug or something network manager is really crappy and i used to use wicd until that started to do funky things ( like not connecting to hidden networks, launchpad Bug #473817)
View 2 Replies
View Related
Mar 1, 2011
complete noob, please forgive me if this has been covered a million times, butMy asus F9e laptop, shows picture ok on my plasma tv, but the sound doesn't - I'm running ubuntu 10.10
View 4 Replies
View Related
Mar 17, 2011
Upon boot up the usual little mouse splash boot is suppose to come up. Once I first installed it (10.10 via usb) the boot screen worked perfectly but after I updated via the update manager the boot splash became all static and green lines across the image. It still boots up to the login screen but it's just ugly looking at it.
I have (via hwinfo)
20: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_5a61
Unique ID: ul7N.dFXV26GrjA4
Parent ID: vSkL.CTscIjbcyd9
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "ATI Radeon XPRESS 200 5A61 (PCIE)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5a61 "Radeon XPRESS 200 5A61 (PCIE)"
SubVendor: pci 0x103c "Hewlett-Packard Company" .....
Primary display adapter: #20
View 4 Replies
View Related
Apr 11, 2010
the system was off and now it won't boot up. It have power because the monitor is showing the orange light as if the tower is off. I'm assuming it may be the PSU went dead. Well, today, I've changed the PSU which should be a good working one and still no power to the tower system. I dont overclock. As far as I can tell the fan is not spinning since this has happen. This is an Intel C2D, Biostar motherboard, 320gb WD HD & 2gb memory.
View 3 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related
Feb 3, 2011
I have created a text file in Linux, and I only want to show certain users. Here is my text file:
usr user tty Limbo?
11 12:06:13 APW no
12 12:06:13 APW no
[code]...
View 12 Replies
View Related
Aug 11, 2010
With the default settings made by the installation of 11.3, I had, upon booting, an ugly screen showing green geko with a bar to show progress. Upon shutdown, there was this really neat screen showing the shut down process transparently on the SUSE splash screen. In the menu.lst file, there were the settings
Code:
SPLASH=SILENT QUIET
I wanted to have the boot process show transparently, the process on the splash screen. Possibly even change the underlying screen.
View 4 Replies
View Related
Aug 3, 2010
Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
View 2 Replies
View Related
Feb 7, 2011
I have CentOS 5.5 installed and I'm having the problem of no display, though everything is working perfectly besides that. When I don't use the mouse for a while, the monitor flashes green, but then when I do finally move the mouse, the monitor turns solid green, just that no display is seen. How the situation came about is as follows. The display was working perfectly. I was trying to fix a friend's machine, so I unplugged the VGA cable from the back of the monitor (so that I can hook up the monitor to my friend's machine). Afterwards, when I re-plugged in the VGA cable from my linux machine to the monitor, I had no display.
Also, note that the machine is working perfectly. When I reboot, it boots up completely (I don't need to login as I turned this off) so I can ssh into it from another machine on my network. Another interesting point is that this linux machine is currently using a cheap graphics card and this is what the VGA cable is attached to on the back of the tower. However, the motherboard does have built-in graphics card, and I also tried hooking up the VGA cable to that... still no display. I should also mention that I tried testing the monitor by hooking it up to a laptop as an external monitor and it worked nicely. So the monitor is, in fact, working.
View 1 Replies
View Related
Oct 29, 2010
So I've been trying to find a program to edit grub ,so that I'll be able to add a picture behind the letters add new lines,and change the name of the menus. I know in Backtrack that I used a program,I don't really remember which one it was,I think KGrubEditor,but that is a KDE app,and I cannot find a place where I could download it anyway. Do you guys know any alternative,or any way I could do this? I know how to edit grub.cfg,but I want some features besides that.
View 2 Replies
View Related
May 1, 2011
Running Ubuntu 10.10 along side Windows7 on a 64-bit HP Pavilion dv7 Laptop. Everything works in Windows. Everything works in Ubuntu, except for 2 things.1) I can live with not being able to enable/disable wifi.) I cannot read photos from an SD card plugged into the laptops SD card reader. When I open the SD card in Ubuntu, I can see the file name, but the thumbnails show messed up pictures. Usually, the bottom half of the photo is solid green, and there are usually lines running through the photo, or it is divided into quadrants with one quadrant being ok, but the rest having the green and/or lines.I assume the driver for the card reader is not correct. Card reader works fine in Windows. So I have to reboot into windows, copy pictures from reader to a folder, then reboot into Ubuntu and I can see and open the photos just fine. Just cannot read and copy them from the card while in Ubuntu.
View 8 Replies
View Related
Jul 27, 2011
I'm trying to use Pinta Image Editor but I cannot find an option to preview the image, in a viewable size, before I work on it.
what to do in this situation? Prefferably it would be nice to view all the pictures as thumbnails.
View 1 Replies
View Related
Jan 26, 2010
Is there a way to draw a picture that will show up in tomboy?
View 4 Replies
View Related
May 13, 2010
my notebook has an external monitor connected with 1280x1024 pixels.
As long as the resolution of the external monitor is set to 1024x768 I can watch video with VLC, mplayer etc.
But once I set its resolution to 1280x1024 all mediaplayer play only sound. This happens on the external screen and on the built-in screen of the notebook. The desktop is extended to the external screen.
View 1 Replies
View Related
Oct 14, 2010
I've just upgraded to Maverick and as the Me menu works with Empathy I started to use it as my default IM client.
But no matter what I do, it won't show my picture.
I tried resizing the picture to 96x96, I tried to convert it from jpg to png. I tried uninstalling the program with apt-get remove --purge. I tried also removing the ~/config/Empathy directory and all others related to the program and then reinstalling it but nothing seems to work.
I even made a video aboout it, maybe I'm doing something wrong: [URL]
View 1 Replies
View Related
Sep 14, 2010
I am running Opensuse 11.3, KDE 64 bit. I have a nvidia GeForce 9400 GT graphic card.Somehow Dolphin and Firefox cannot show picture preview.It comes out like this; ImageBam - Fast, Free Image Hosting and Photo Sharing ImageBam - Fast, Free Image Hosting and Photo Sharing.
View 9 Replies
View Related
Jan 15, 2009
I'd like my DSL box to show a picture instead of the start up info as the system boots.
View 1 Replies
View Related
Jun 13, 2010
I select GLSlideshow in the KDE system settings, but there is no option to choose what folder I want to use. I have to open xscreensaver to do this. However, I don't want certain sub-folders being used and I can't seem to be able to blacklist those folders.
View 2 Replies
View Related
Jan 30, 2010
I simply ran the Guest Additions CD (on VirtualBox), double clicked the x86 (I'm running 32-bit) executable, and got that error.
View 6 Replies
View Related
Apr 24, 2009
How this can be done? I already have the necessary codecs installed and have kde 4.2.
View 9 Replies
View Related
Jul 3, 2010
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies
View Related
Nov 23, 2010
I have Dell Vostro 3300 with Intel HD integrated graphic card and Samsung SyncMaster 2343BW external monitor.
This is the output of xrandr:
It runs on 2048x1152 full resolution, however, the picture on the monitor is blurry, it vibrates and looks like old TV with interlacing.
I tried to disable output to LVDS screen on laptop using xrandr but it doesn't help/
Previously I had HP laptop with integrated Intel and OpenSuse 11.0 and the external screen worked normally.
View 7 Replies
View Related
Jan 26, 2010
I am hoping to move from windows XP to UBUNTU. I access the Internet through an Orange mobile dongle.
The instructions are for either Apple or Microsoft.
Will it work in UBUNTU?
It is an E160e model.
View 1 Replies
View Related
Oct 21, 2010
I was needing some help with a problem I have. I just installed Ubuntu 10.04 and I have two monitors connected. I also use windows on the same computer and both screens are perfect. Though when I boot into ubuntu and it's running my second monitor begins to show blue lines running down the screen. I haven't been able to find an answer to my problem yet. I have an Acer monitor.
View 1 Replies
View Related
Mar 4, 2011
after upgrading to 10.10 I ran into one problem. Upgraded some while ago (when released), then noticed problem but now it starts to really bother me. Unfortunately didn't find any solution yet. I'm 100% sure I didn't have such problem during upgrades starting from Karmic till Lucid.
The problem is with any version of wine (it's not wine issue, i think) and MetaTrader4 on it. Not typical VNC issue The problem is that it works almost normally, but don't show some lines on screen. Take a look at screenshot attached. I found in wine proposal to disable xrender: [URL]... it really helps with that issue, but then I ran in typical AplhaBlend problem and no visible icons in toolbars. So I have to choose to see normal icons in toolbars (see 2nd screenshot) or to see correct chart
Little bit about my laptop:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Limited. Device 13f8
Flags: bus master, fast devsel, latency 0, IRQ 45
[Code]...
View 1 Replies
View Related
Feb 4, 2010
whenever I open system monitor, I just get a loada black and white lines, I have no idea what this is, this never comes for any other application/program and it stops me from being able to kill non-responding processes.
View 6 Replies
View Related
Apr 28, 2010
I have an old windows Small biz server that has been decomissioned and I have been dying to try ubuntu 9.10. I loaded the desktop version on this box:
PowerEdge 1800
graphix card:
Radeon RV100 QY [Radeon 7000/VE]
Everything looks great, but the system monitor window is all lines and fuzz. I don't even know where to start looking for a fix.
View 2 Replies
View Related
Jan 11, 2011
i have a hp compaq nc6220 laptop running linux mint 9 isadora. the problem is the mute button on the keyboard is orange and i have no sound at all. the volume icon at the bottom is not muted.
View 14 Replies
View Related
