Did a quick search through the site and could not find the answer i was looking for. Currently i am running Fedora core 12.I would like to get amarok installed with all the mp3+ support with it.I do not have internet at home. just on my phone (so i can download and transfer small files), and at work with a jump drive.How would i go about getting this done?
View 1 RepliesI just purchased a "VGA Adapter to TV S-Video RCA Out Cable for PC Video" but it isn't working. How do i get my VGA card to support direct tv out through a RCA cable?
View 2 Replies View RelatedHow can we force an application which is using a direct Internet connection inherently to connect through a proxy server connection. Like redirecting the direct traffic generated to a proxy server.
View 5 Replies View RelatedI want to set up Ubuntu Server as a firewall in which I want to direct my internet connection through where Ubuntu Server will block, filter, and monitor anything that come into either three of my computers using the same internet connection. Is this easy to do? sum up the steps that I will have to go through to establish this, and any relevant information, and where I might be able to find necessary information etc. I plan to use ubuntu-10.04.2-server-i386.
View 3 Replies View Relatedi have the following system in my lan.
firewall(iptables)
etho(private) - 192.168.2.1
eth1(public) -189.117.57.2
squid server at 192.168.2.10
my request is that i have to make all out bound internet connection should go from proxy server , not directly to firewall. Please specify a iptable rule for blocking direct internet access. my clients ip ranges from 192.168.2.20 to 192.168.2.47
I need a linux distro who provides the following:1) Has an partitioner who can resize fat , ntfs ,ext* , .....filesystems.2) Has an excellent hardware support3) The installer can install console or graphic mode 4) The updating can be done via console5) In console can be configured internet via: static IP , DHCP , PPPOE and preferably to have support for USB modems.
View 8 Replies View RelatedMy wireless card: TP-LINK 322G + I ask, after the installation is complete debian5.04, how to configure wireless Internet access,
lspci entry:
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
[Code]...
I have just put a fresh version of Ubuntu 10.04 64 bit on my dell laptop, and I'm having a problem connecting to the internet. Before I installed the os, I tryed it out, as they let you do before a complete installation. While testing, I was asked if I wanted to install the proprietary drivers for the broadcom nic. When I did this, I was able to connect to the internet, however, after the install, I can not seem to update the drivers.
Maybe this was automatically done during installation and now there is another problem, but when I try to connect to my network, after I click connect, it disconnects right away and I am entering all the information correctly.
I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedI need to debug a kernel panic. It prints some long log to the console, but even if i set 1920x1440 VESA framebuffer mode, i can't see it whole.
So, i would like to direct all the kernel messages to a COM port and read them on another machine. Is there any way of doing so? What are the other (maybe better/easier/etc.) ways of catching whole kernel panic messages or scrolling the ones already displayed?
I am having a hard time locating the Success Stories area here.
View 3 Replies View RelatedI notice that when people message me in a channel the message itself show up in the channel, but I also get notified from pidgin that I got a message. Now my question is, how do I send a message to a specific user so he gets notified like I do, but still the message show up in the channel. I know It's not Linux specific question, but IRC is in Linux culture anyway, and I been googling but for no solution at the end.
View 3 Replies View RelatedNormally all I/O goes through the kernel so that it can schedule the operations and prevent processes from stepping on each other. A few special user processes are allowed to slide around the kernel, usually by being given direct access to I/O ports. X servers are the most common example of this isn't it ? give examples for any other processes that are allowed to slide around the kernel ?
View 3 Replies View RelatedI have a need to start an application on bootup on the linux console and I do not have a need for any type of login or security. I do not need any ALT-F1,F2,etc virtual consoles but I would like to allow SSH access via the network port for debugging, loading, etc.
The application is a SDL graphics program running with fbcon as the SDL_VIDEODRIVER if that matters. I'm currently using Fedora 10 and 12 but any distro that supports SDL using the fbcon framebuffer would be acceptable.
Part 1 -- The Packages: i586
[Code]...
how to install freeradius with dialup admin support on CentOS 5. .
View 1 Replies View RelatedI acquired an old ML370 Proliant server, and I'm attempting to find a way to control the fan speed, as all three noisy fans are running at full blast, and I had planned to keep this thing in the office, because it has no wireless capability or support.
I know the following:HP has a suite of programs that are variously called Insight Control Manager, Server Health driver, HP-health, hpasm, and a few more I can't remember. Obviously these are different iterations of the same program, but I have been unable to determine which one I need, and I've been completely unable to find a way to install any of them or find the repository that contains them.
The website: Download Drivers and SoftwareIt lists a lot of different Enterprise-class Server OSes, but nothing about Ubuntu or any home server OSes. I've only been at this for a week, so I don't know which of these would work with Ubuntu Server, or how to make them work if their aptitude file extension is not .deb. I'm currently running Server version 10.10, as 11.04 gave me monitor troubles.
I have tried countless things and am at a complete loss. I'm pretty new to Ubuntu and Linux in general, just so everyone knows. Here's my problem: I can run the 10.10 install disc as a Live CD and have perfectly functional internet. However, when I install into a clean ext4 partition, I have zero internet support. I have Googled the heck out of this problem, too.I've tried tinkering with IPv6 settings, I've tried scouring my BIOS for anything relating to "Wake-on-LAN" (It's enabled in Windows 7, by the way, which is what I dual-boot into), and several other network-related ideas I've read online. None have had any effectEDIT: Additional details: ethernet worked like a champ in 10.04, and in 10.10 when I did an upgrade instead of a clean install. I had this same ethernet problem in a clean 11.04 install (which also worked in Live CD form), too, which is why I tried 10.04 to begin with.
View 9 Replies View RelatedI am trying to install squirrelmail on Ubuntu 10.4 and at some point in the instalation process I get the following error:
[Code]....
Trying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
How can I read .gz file direct on shell/terminal without decompressing the file?
satimis
Today I put in two brand new RAM sticks, same brand as the two I already have in there only difference is the new ones don't have the giant heatsinks that cover the stick. I have 4 slots for RAM, and I had 2 gigs in there, 1 gig in the first, and 1 in the 3rd. I put the two new ones in the empty slots. Everything worked fine, so it seemed. I was able to boot up, log into Ubuntu. It looked like everything worked, said I had internet access by the icon up on the top panel. The only thing that was curious was my weather app wasn't updating. So I went into a web browser, and the home page showed up fine. Which was the default, the ubuntu google search engine. I tried to go to another site though, and it kept looking for the site, for a while but never found it. I tried multiple sites, same thing. I tried to ping www.ubuntu.com, and www.yahoo.com and it just hung for a while, after a while it couldn't find it. I tried ifconfig eth0, and even just ifconfig. It showed that eth0 was connected, it had the ip address, the DNS address, the MAC, everythting. Only problem I could see was at the end it said something like Interupts: 18, I don't know if that's normal or not.
So I tried then to reset the router, no difference. I tried resetting the hub (at least I think it's a hub, could be a switch or something), which is connected to the router, and the hub connects to my computer. Now that, made it worse. Now the icon for my internet has disappeared, well it tried to reconnect but can't. ifconfig eth0 brings up no ip address anymore, no DNS, no nothing. I tried rebooting, didn't help.
So here I am, and I'm definatly in need of some help. I find it very hard to believe that adding new RAM would kill my ability to get online, that doesn't make any sense to me. I am using Ubuntu 9.10 64 bit, had 2 gigs in there, and now have 4. Edit: I tried rebooting once again, and this time when logging on Ubuntu it for some reason checked my filesystem for errors, found none as far as I can tell, then logged on. Once I logged in, it connected again to the internet, but it's doing the same thing it was before I restarted the hub. Says I'm connected, but can't visit any webpage, weather isn't updating, but homepage is showing up, etc.[URL].. Which is the same RAM I had in there, minus the one in there had a giant grey incasing/heatsink on them.
i am new one here and have a question.i dont have internet connection home and i want to install ubuntu. i find a dvd release here [URL].. and it suppose it has more things than the cd version.i think to it has because its a big iso file. so, if i install this one, am i going to be able to play dvds, to work with openofice, and other stufs, or do i need something else to? what about grafik card driver?
View 6 Replies View RelatedI live in northern Canada. I am not in a high speed internet zone but use an alternative method which I pay lots of money to get high speed. However I am restricted to 5 GB of traffic per month.
Now I have to computers running Ubuntu. So for example, if I want to install TuxPaint on my first PC then I would go to the software center and it would download then install the software for me. Now if I wanted to install the same program on my second computer it would download it again. The problem is that this would download twice as much from the internet. Is there any way that I can save internet bandwidth by using the download files from my first computer to install the program on my second computer? Similarly, can I only download updates once but install them on both computers?
I currently have Ubuntu 10.04, no installation CD, and no interwebs to connect my computer to.What I'm really looking for is some file (or set of files) to download that will allow me to compile C programs (after moving said files onto a USB and then move to and install on my compy at home).
View 2 Replies View Relatedi have purchased an archos 2.8 internet tablet. i have gone through the website and have read that the device is COMPLETeLY open, allowing for people to put android, or even ubuntu onto the device. but do ya think there is any website that google can find with people that have done this? no. the device comes preinstalled with android 2.2 froyo. i enjoy android. but on this little guy i need something a little bit lighter and less bugs. with only having access to a limited french "android market". i certainly got around that and have the full market available, but it was just too much hassle and the device thinks its a phone. what flavor of ubuntu would work will with this wifi touch screen device? heres a link to the device if your wondering what im talking about.
[URL]
I just installed debian lenny in one computer, and after installing, I noted that I havenot got internet. (wire internet, by LAN card)And this computer does have internet with windows and Ubuntu. During the instalation I havenot got access to internet and I miss internet autpmatic configuration, and I think the problem is there. So, now I have finished the instalation, how can I activate internet in my debian? (wire internet by LAN card)
View 2 Replies View RelatedIs it possible to install further software if your development machine has no internet connection? I have been searching for a solution and found that I can do
yum localinstall <cdrom path to package>
but it does not seem to work. Is this no longer possible?
i'd like to install the b43 firmware driver on my laptop without internet connection. It requires internet connection to download the firmware-b43-installer...tar.bz2. I have this tar.bz2 on my hard drive, the problem is i don't know how to make debian use that for the install, instead of trying to download it.
View 6 Replies View RelatedI have a dial-up connection through PeoplePC and I'm running FC11. In order to get my modem working, I'm told I need to install the wvdial package. To get wvdial, I need wvstreams. I downloaded the source for both on my Windows machine, and transferred the .gz files over to my FC partition.
When I try to ./configure wvstreams, I receive an error about not having a C compiler at $PATH. I'm pretty lost about what I need to do to correct this.
Basically I just want my dial-up to work with FC11
Here's a link to exactly what it says: [url]