I just now installed a latest version of Kubuntu on my desktop after the installation it asked me to reboot so ,I restarted my PC but after booting Kubuntu nothing is displayed instead of that a blank screen with mouse pointer and at the top one blue window is coming nothing seems to work.
View 6 RepliesI'm kind of new to Linux even though I've played with it several times over the years. My question is this. I just installed Kubuntu from the SPM in Ubuntu and when I did a reboot, I can't login using my previous username and password. My assumption was that it would just use the same username and password from Ubuntu.
View 11 Replies View RelatedI'm very new with kubuntu. A friend st work turned me on to it. Seemed very simple. After a few days palying with it on a dual boot...i decided to fully install. I could not get thw wi-fi to work. Decided to reinstall. Could not get the reinstall to initiate. Tried to reinstall 7. no good.
View 1 Replies View RelatedI've installed kubuntu in ubuntu 11.04 using the synaptic manager updates. After the completion of installation & after the reboot it is asking username & password, when I enter my ubuntu username & password it says it was wrong...
View 1 Replies View RelatedI installed kubuntu few days back. By clicking blindly I lost my desktop - I mean it is working fine but there are no icons on the desktop and there is no task bar with list of programs.
How can I reset to the initial stage when i first installed?
I'm new to Linux. And I tried using the at command to echo "Hello" after 2 minutes and I saw the following.-$ at now + 2 minutes-at> echo "Hello"-at> <EOT> job 7 at Tue Aug 9 23:59:00 2011So far it hasn't worked. I'm trying to get used to the syntax. Am I missing something?
View 1 Replies View RelatedI just install Kubuntu 9.10 everything is work find but my logeitech usb speaker. It says its on defualt and it not muted. I can also see the volume go up and down when I press the buttons on my speakers.this is what I get when I
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
[Code]...
Yet another Linux newbie with wireless problems I'm afraid. I saw some postings that appear very similar but I don't have any Linux experience and don'h to make uncontrolled changes to the environment without expert advice.Background: I have an old laptop (HP Pavilion dv9000) with Vista installed and a troubled history (overheating motherboard failure), so I put it on the shelf and replaced it with a new Windows 7 laptop (Dell Studio 1555). But I have been intrigued by the Ubuntu reviews and thought I would dig out the old laptop and install Kubuntu 11.04 (replacing the 2 Vista partitions with a single Kubuntu partition).
Kubuntu installation was easy and I am impressed by the Kubuntu interface, but I soon noticed that it was not detecting my wireless router, which works fine for everything else (Dell, Sony Bravia TV and also an internet radio). The wired connection is okay (using it now) so I guessed the problem was Kubuntu notognising the Broadcom BCM4311.The network interface tool shows the wired connection but the Wireless tab is greyed out.I also installed Wicd Network Manager but that just confirmed what I knew.I noticed other threads have asked for the lspci and lsusb details so here they are:
lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
[code]...
using Kubuntu 10.04. When my computer was being updated sudden power failure forced my system to reboot and in the log in screen I can find that my keyboard and mouse is not working at all. I cannot enter into my system. I tried to enter ctrl+F1 but failed.
View 1 Replies View RelatedI have Win7, Kubuntu and a third OS (and home) partition for trying out others. I did Arch, Debian and Chakra without problems with triple booting. I skipped the bootloader installation/configuration step when installing those, booted into Kubuntu and ran update-grub to get the new one added to the boot list.
I used a separate partition for /boot (sda6), and have only one hard drive in this machine.
Following the same procedure (skip bootloader install) with openSUSE 10.3, I managed to loose the ability to boot Kubuntu.
I know the Kubuntu partition is fine (or at least still intact) and have since been able to get Windows added to the grub menu after a few attempts with grub-install and update-grub, which boots.
I tryed to installed ubuntu 11.04 but that dont work with grub bootloader.
So i tryed kubuntu 11.04 instad, that work.
Used :Sudo apt-get install ubuntu-desktop
But i dont get this menus:
I just get this wallpaper (Without menus?)
Is it some "Requirement" that i need? E.g display-drives/OpenGL or someting?
If not will this menu`s be disabled?
I just got some like: (Ubuntu classic)
As default desktop (Ubuntu)
KDE desktop work great also.
I installed Kubuntu 9.04 recently which I thought was jaunty, but my apt sources list had Karmic Koala as the repos. Updater told me 9.1 was available so I used updater to upgrade my system. Normally I'd use apt-get dist-upgrade. Since then, apt-get / amarok and updater won't access the all the repos. Apt-get stalls at ip 32.1.3.136.
Here is my sources list.
deb http://au.archive.ubuntu.com/ubuntu/ karmic main restricted
deb-src http://au.archive.ubuntu.com/ubuntu/ karmic main restricted
deb http://au.archive.ubuntu.com/ubuntu/ karmic-updates main restricted
deb-src http://au.archive.ubuntu.com/ubuntu/ karmic-updates main restricted
deb http://au.archive.ubuntu.com/ubuntu/ karmic universe
deb-src http://au.archive.ubuntu.com/ubuntu/ karmic universe
deb http://au.archive.ubuntu.com/ubuntu/ karmic-updates universe
deb-src http://au.archive.ubuntu.com/ubuntu/ karmic-updates universe
deb http://au.archive.ubuntu.com/ubuntu/ karmic multiverse
deb-src http://au.archive.ubuntu.com/ubuntu/ karmic multiverse
deb http://au.archive.ubuntu.com/ubuntu/ karmic-updates multiverse
deb-src http://au.archive.ubuntu.com/ubuntu/ karmic-updates multiverse
deb http://archive.canonical.com/ubuntu karmic partner
deb-src http://archive.canonical.com/ubuntu karmic partner
deb http://security.ubuntu.com/ubuntu karmic-security main restricted
deb-src http://security.ubuntu.com/ubuntu karmic-security main restricted
deb http://security.ubuntu.com/ubuntu karmic-security universe
deb-src http://security.ubuntu.com/ubuntu karmic-security universe
deb http://security.ubuntu.com/ubuntu karmic-security multiverse
deb-src http://security.ubuntu.com/ubuntu karmic-security multiverse
deb http://au.archive.ubuntu.com/ubuntu/ jaunty-backports main restricted universe multiverse
deb-src http://au.archive.ubuntu.com/ubuntu/ jaunty-backports main restricted universe multiverse
Interestingly, I thought I had installed the Medibuntu repos as well?
I've installed up a copy of Kubuntu 9.10. I want to use it to play eve online and replace my copy of windows. So far I have managed to get it installed, got the video drivers and wine sorted, and got eve online to work with wine. I'm quite happy with myself up until odd things started to happen. Basically, I want to recompile my Nvidia driver to a newer version, I know how to do this, I need to press ctrl alt F1 to drop to terminal, kill kde and then install the driver, i've done it before without issue. However this time around something is wrong. I press ctrl alt F1 and the black terminal window pops up... but I have no option to log in, same for terminals 2 - 6.
I did this, and sure enough none of my tty processes are showing, i've basically lost my terminals , as far as my limited experience goes, getty is responsible for the terminals right? How do I reinstate my terminals and get to a point I can kill kde and get back to shell? I have no idea what i've done to get in this state. Also, as a side question, before all got screwed up and i did manage to launch eve online, I could run one client perfectly. However with 2 clients things got all choppy and laggy? why is this? I can run 2 quite happily under windows 7
I tried to upgrade through Ubuntu Jaunty .04 to Koala but couldn't, I think it had something to do with the Kubuntu I have dowloaded also, (like it goes to the same splash screen and I choose if I want to go to Ubuntu or Kubuntu) the kubuntu is on the 8. version. how do I fix this so I can upgrade to Koala?
View 1 Replies View RelatedRecently installed Kubuntu karmic koala (9.10) and I have no sound other then the startup sound.
[Specs]
O/S: Kubuntu 9.10 Karmic Koala
Mobo: Asus M3A78-EM
I just recently installed Kubuntu desktop onto Ubuntu and I don't have any shutdown or restart options shown in KDE, but they show up in Gnome. I initially installed Kubuntu using GDM instead of KDM and switched to KDM when I saw that my Gnome taskbars overlayed my KDE taskbars. To switch from GDM to KDM I used the following command:
sudo dpkg-reconfigure gdm
After enabling KDM the terminal suggested a command to configure KDM, however I can't remember the command. I ran it and I got a message that KDM was already configured.
I have insatalled Kubuntu using wubi (in windows). But when I am running Kubuntu it is showing the following error.
try(hd0,0) : FAT16 : NO WUBLDIR
try(hd0,1) : NTFS35 : NO wubldir
try(hd0,3) : NTFS35 :
What should I do???
A couple weeks ago I became fed up with using Backtrack5 as a primary OS, as fun as it is, and installed Kubuntu 64-bit for AMD on a laptop with an intel chip. I didn't see an intel iso on Kubuntu's site right away, and I suppose I was too excited to try it to care. I have been having some problems with plugins working correctly, but i'm not even sure this architectural mixup is to blame for that.
To cut to the chase, should I be worried about installing kubuntu that was intended for AMD on a board with an intel chip? I figure i havent really done anything I can't easily redo yet, and if I want to reinstall, i'd like to do it before I cross that bridge!
I just recently installed linux kubuntu 9.10 and for some reason it says sound card not installed. When I know its installed. When I boot it (I have dual boot) as windows it works just fine. My sound card is HDA ATI LSI Si3054
View 4 Replies View RelatedI am trying to uninstall the packages that were installed as part of kubuntu desktop. I have gotten ~3 quarters of them, but didn't know if there was a better way than trying to pore over synaptic.
View 3 Replies View RelatedWhen I try to install Kubuntu 10.04 from the live CD (ran the installer from the Live Desktop) I get this error:
I then get sent back to the partitioner after clicking continue. Nothing but the installer/live desktop is using the cdrom. How do I install it? I have also tried running the installer without the live desktop, and it still throws the same error at me.
I want to switch from ubuntu to kubuntu without losing any of my files or installed packages.is there any way to do that smoothly?
View 1 Replies View RelatedI had Kubuntu 8.10 with KDE 4.0 interface and i decided to try out fedora to see if i liked it and wanted to eventually switch. i've done so many dual boot systems with Kubuntu and not had any problems that i decided not to back up my system this time before running the installation. after running the installation and shrinking my hard drive (200 gb) by 80 gigs, i rebooted to find that Kubuntu was no longer bootable. the first time i booted into fedora, disk utility popped up with a message that said "1 or more hard drives is failing". i ran the test that it recommended and found no problems. then i ran the longer test and still found no problems. i've rebooted a few times and have not been able to see Kubuntu in the boot loader options. if you need any more information i will be happy to provide it. my question, obviously, is how can i retrieve my Kubuntu partition. it is still there but is not bootable.
View 9 Replies View RelatedI recently installed Kubuntu 10.04 Lucid Lynx. It is working well, but Movie Player does not work, and Dragon Player plays videos/movies but with no audio. VLC works fine. how to either remove Movie Player and Dragon Player or make them work. I tried apt-get remove mplayer but that doesn't work. If not that, I wonder if the default media player can be changed to VLC, e.g., when you click any video it will start to play using VLC?
View 2 Replies View RelatedI generated noarch rpm using alien for rapidsvn tar.gz file. After generating and installation of the rapidsvn rpm it isn't working for CUI or GUI. When I checked for rpm installation status using 'rpm -qa' it is showing as the rpm is installed. But no output of the installation
View 6 Replies View RelatedI have a problem, because installation of ubuntu 11.04 will fail if I try to.
I have also Kubuntu and Xubuntu installed, which I regret a lot because I cannot uninstall them as well...
The problem is that I have installed a one-time-activation proprietary software so a fresh install is no option.
The error when upgrading is, that "xubuntu-desktop" cannot be marked for upgrade!
I just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
View 14 Replies View Relatedtoday i've installed kubuntu with wubi for windows 7 on my hp pavilion dv6 with processor Intel Core i7 Q720 @1.60GHz with 4 Gb of RAM @ 64bit with NVIDIA Geforce GT 230M but i've had some problems.Infact the system continued to freeze after some minutes due to overheating so i restarted the computer and the Bios told me that to prevent damage to internal components the computer has been freezed. I repeated the process and i checked out the temperature with the desktop widget and it actually reached after some minutes 80-85� C so i cleaned the computer and the temperature turned back to normal (50-60�C) but the problem continued to exist! After several minutes the computer freezed again and the BIOS told me the same things he told me before (90� and computer freezed due to prevent damage for overheating).
View 1 Replies View RelatedI just installed ubuntu and want to install a theme
http://www.ubuntuthemes.org/overglossed.html
i downloaded it and tried to install it but when I did it said that GDT + theme is not installed. I looked it up and found that I had to install them from synaptic package manager, I did it but still not working. How can I solve it?
My university uses 802.1x Dynamic WEP, with PEAP, MSCHAPv2, and no CA certificate. Our IT department actually provides instructions for Ubuntu, and they work, but I can't get it to work in Kubuntu. Here's the instructions using the Gnome Network Manager applet:
- Change the LEAP setting to Dynamic WEP (802.1x).
- Change the Authentication setting from TLS to Protected EAP (PEAP).
- Leave the Anonymous Identity option blank.
- Leave the CA certificate setting to None.
- Change the PEAP version to version 0 if running 8.10, or Automatic if running 9.04+.
- Leave the inner authentication setting to MSCHAPv2.
- Enter your username.
- Enter your password.
- Select OK. A warning message will appear about having no certificate; click Ignore.
- Click Connect.
I'm using Kubuntu 10.10. All the same settings are there for the KDE plasma network manager applet, but the connection always fails immediately. How do I go about debugging this? Is there a way to test this out from the command line? (WiFi in general works fine, on regular WEP and WPA secured networks; just having trouble with this one).