General :: Dual Boot - Replace Vista With Win7 Without Affecting Fedora?
Oct 9, 2010
I had Windows Vista Business in my compaq presario CQ40-145 TU laptop, over which I installed Fedora 13, making the system dual boot. The Windows is set to be the default OS. Now I want to replace Vista with Windows 7 professional without affecting Fedora. As far as I understand, during boot up, the system enters Fedora's booting process and then gets redirected to Windows, and it is not directly windows even if the default OS is windows.
The reason behind not disturbing fedora is the updates, extra software and packages installed and the pain and time it took me to make my speakers, wlan and flash player work in it. I even don't remember the exact process of what I did. I don't have now so much time to search for it again. So I will take up only that way in which Fedora is not affected at all. And the second problem is my DVD drive is not working at all. So I'll like using USB stick for the same.
I haven't done this in a long time, so I probably just need a quick refresher on a few things. I had to revert to Vista as my primary OS for more than a year to do CAD work, but now I finally have the freedom to move back to Ubuntu. I have my Win7 upgrade that I still haven't done (yes, I know I'm late to the party) and I want to update my Ubuntu 9.04 install to 10.10.
If I remember how to do this correctly, I should upgrade Vista to Win7 first, and then install Ubuntu second. I have two separate hard drives, so each OS will go on a separate one. The only issue I had in the past is that the drive with Ubuntu on it must be set as the primary boot device, otherwise GRUB wouldn't load. Is this all correct? I've been out of the Ubuntu loop for quite a while, are there any caveats to this process that I should be aware of?
I have a pretty good grasp on general computer works and I have read alot about the dual boot system and can do it with multiple variations of linux. My problem lies within my laptop, that I want to do a dual boot on (which is my only one with wireless). It is currently running Vista Home Premium-x86 and I would like the upgrade to Windows 7 Proffessional-x64. I have access to it but I have to keep Vista as is in order to keep Windows 7 as an upgrade which will have to be a custom install. This HD is dedicated to Vista and the backup partition as it is already.
I've read just about everywhere that you first have to do Ubuntu install and partition and then Windows, which makes sence, and then change the GRUB. However, I'm unsure about this case.
What would be the best way of going about making the partitioning scheme? I've already backed up everything possible so loosing that info is not the problem. Vista is the problem. My HD is a toshiba 320gbs- 2.5" form factor. My plan was to make 3 partitions. Windows, Ubuntu, and then the back up partion for Windows. I wanted to allocate Windows 150gb, Ubuntu 150gb, and then the other 20gb as back up for Windows.
I install Fedora 14 32bits the same way I install Ubuntu. First, make unallocated space for it (about 150Gb). During the installation setup, I select "use all continuous free pace" as partition option, coz it's fastest and easiest. /dev/sda/ is selected as location for boot loader, and leaves Fedora as default boot target. Installation process goes very smoothly, but when the system restarts. The computer boots up as if Fedora has never been installed, it goes straight to Windows7, No GRUB boot loader menu whatsoever.
troubleshooting attempt #1: at first I thought it maybe the GRUB compatibility issue between 32bits Fedora and 64bits Win7. So I tried out 64bits Fedora, doesn't work.troubleshooting attempt #2: then I tried to install the boot loader on the Linux partition (first boot sector of boot partition) and let Windows 7 controls the startup menu by using FreeBCD.
I need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
I installed fedora aside of windows 7 home premium 64 so I can choose which one to star. But its always fedora I set bios to boot from the cd drive and yes it ask me hit any key to boot from the cd so I can reinstall windows 7 but it's fedora again. It happens the same with the USB drive. I think I don't need to reinstall Win7, it's there in Hard Disk. I am new in Fedora (infact I installed Fedora today in the morning).
I had experience with earlier Red Hat Linux dual boot with Windows 98 and XP. I now have Fedora 9 and also a Compaq Presario CQ61 with Windows 7 Home edition. I have made it so that my Laptop now boots from its CD/DVD drive instead of the hard drive which it was. Only so far when I run Fedora's 9 Desktop Live CD everything seems OK until I get to a non graphics window for logging in and there I am stuck.how I am going to log in and go into Linux Fedora's windows view.
I can dual-boot on my PC by using my SATA drive for Windows & a second IDE (PATA) one for Ubuntu.However when I try to install both OS's on the Primary SATA drive side by side only one is detected (and I have no option to boot the other).
I have a friend with the same problem who is trying to boot Win7 and Ubuntu off the same SATA drive and the same issue occurs on his (He doesn't have the second drive as an option as I do).
Does anyone know a way to get side by side installation to work on one (SATA) drive? Failing this is it possible to boot Ubuntu off and External hard drive and still be able to dual boot Windows & Ubuntu?
I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
I downloaded the DVD release of Kubuntu 10.04, from Kubuntu.org. The file is: Kubuntu-10.04-dvd-amd64.rar . I burned it to a DVD, as image, with ImgBurn application. See any problems so far? I want to dual-boot, leaving my Win7 in tact. I am confident that I can handle this with some patient instruction.
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
I installed Fedora13 to dualboot w/ my windows 7. I quickly found out that I don't care for fedora. I was referred to Ubuntu, and put Ubuntu 10.04 on in VirtualBox. Lo and behold, I like Ubuntu a WHOLE lot more! So, I promptly went to Disk Manager (in win7) and deleted the Fedora partitions (told you i'm a noob). Of course that was a poor choice, and I was only able to get my computer to boot again by reinstalling f13. neat.
ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
SO what i was thinking is go back to Disk Manager, delete partitions sda 3,4, & 5 (the linux ones), then reboot from the Ubuntu live disk? But I don't know what the sdb1 partition is?
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
I have a laptop running windows vista already and I need to run Red Hat 7.2/7.3 or Fedora Core 1 on there as well. I am in the process of downloading Red Hat 7.3. I haven't done this before so I'm wondering if there are any guides out there that detail how to set this up to dual boot? Is Red Hat 7.3 a better option over Fedora Core 1?
I'm only a few months into working with Linux, and am getting used to it slowly. I messed up trying to load Ubuntu 10.04 on a new Gateway (Acer) laptop that has Win7 on it. I need Windoze for a couple commercial applications. Neither will boot w/o a CD. I'm guessing I messed up the load. I would like directions/ideas. I think that since Windoze is such a hog, I should remove Linux and partitions, restore Win7 and try again. Do I need to do something to GRUB as well?
I would like to know the best way to dual boot an already installed Win7 HDD, with adding a second HDD to which I will install Mint9?
I have attempted this in the past with Mint8, but managed to screw it up some how with Mint 8`s Beta Grub2! So bear with me if I am skittish on repeating a "conventional" Grub bootloader selection approach!
This time I would prefer to install Mint9 to it`s own HDD with Win7 disconnected if possible, and installing Mint`s Grub bootloader directly to the Mint HDD installation, just to insure Win7s MBR isn't affected by the Mint9 installation, by keeping each O.S. and it`s bootloader completely separate and apart. Of course then comes the question of how to access my new Mint 9 installation, since reconnecting my Win7 HDD (with it`s MBR) will become the default, with no knowledge of any Mint installation.
Would a third party bootloader such as "Easy BCD" be the way to go? Or am I over complicating what I would like to accomplish here? The main thing is: NOT having to upset my twice installed Win7 installation again!
I have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
I have a e-machine x64 machine, running win 7 home premium. I have tried to run WUBI, and do a side by side install, but either way, I cannot get it to dual-boot. Any ideas? Comments (other than trashing Win-7?).
I have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code: fdisk -ls
Code: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0d8b0d8a .....
I have one computer with windows 7 (computername = windowspc) connected through a modem router to a computer running Ubuntu 10.10 (computername = linuxpc). Had Samba setup and working between them.
Decided to check out Fedora 14 (computername = linuxpc). so set up dual boot on the on the Ubuntu box and installed samba. When Fedora is running Win 7 only sees shares for Fedora. If Ubuntu is running win 7 cannot connect to any shares stating a bad file path. I understand that both linux oses use the same ip address and thats probably were Win7 must have problems.
Ran nbtstat r in windows and was able to swap the situation around i.e. win7 sees Ubuntu but not Fedora.
I would like to be able to set it up so that when logged on to either of the linux oses I would be able to see shares from both partitions in Win7. Or if thats not possible, to differentiate them in some way so that Win7 would recognise which os was running and display the shares accordingly.
One of the screens in the installer( middle of screen) will show what systems are on the grub menu, and one will be marked the default.
If the vista is not there (usually indicated by other), then click the add and select the correct boot partition (sda for vista) and change it's label to Windows Vista.
If other is there, click the edit button and change other to Windows Vista.
Finally, click the check box for the one you want to be the default boot. (you can always change that in the grub.conf later.)
I have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
I have installed the Fedora on my laptop with Vista installed first. Now I am using the OS separately fine. I just choose which Os to boot in to every time I turn the machine on. However, I now need to do certain task that I need to switch between two OS. Wonder how to switch to Vista when I am using Fedora without rebooting? and vice versa.
I have been messing around with F13 in VM VirtualBox for awhile now. I have read in some places that it is better to install F13 into its own partition on the hdd creating a dual boot system for, in my case, Vista and F13. Any truth to this? I have been having problems with system settings in F13 while using VB. i.e.: sometimes the system will see 3d support, other times it won't. Sometimes it will see ethernet eth0 and then other times it won't. All my hardware from my MB to Display is supported according to the documentation I have looked at.
This morning I started my PBell desktop (dual booting Fedora/Vista) and Fedora opened fine. I started making entries in a text file with gEdit & when I saved it took a long while to complete the save (I had only entered a few lines of text).I then created a new folder in my home folder & tried to move other folders in to the new one but suddenly all the folders disappeared and the computer hung/froze. I tried a restart but again this did not complete fully (the cursor turned into a 'brick' & the progress bar hung).
I had to switch off & when I restarted I got Disk Read error. I tried switching off/on again and got Grub cursor. I switched off & on again & this time was told to put system disc in (I do not have a disc as I installed Fedora with USB install).So I switched off and left the computer for 15 minutes & when I switched on again it started Fedora normally.I experienced similar crashes with Ubuntu10.04 dual booting with Vista & this was the reason I decided to leave Ubuntu & install Fedora. When I used Ubuntu I did a DejaDup backup & I tried to use this with the DejaDup in Fedora to restore my data to Fedora but it didn't work.It appears there is some issue with my computer running Linux (dual boot Vista)-either Fedora or Ubuntu. How do I find out what the problem with my computer is and how do I proceed now?
I just tried to install OpenSUSE 11.3 on sda4 which is approximately the 2nd half of a 1TB drive, with a pre-existing Win7 installation on the 1st half. The installation summary (before it made any changes) told me "The bootloader is installed on a partition that does not lie entirely below 128GB. The system might not boot." Naturally, not keen on having a computer that won't boot, I aborted the installation.
Of course it's not below 128GB -- Windows is there.
Is there a workaround that is straightforward enough for someone who has very limited experience with GNU/Linux and isn't a comp-sci student?
