General :: Install Wireless USB Adapter WUA-0603?
Jul 2, 2011How to install wireless USB Adapter WUA-0603 ?
I have Ubuntu 10.04 LTS
How to install wireless USB Adapter WUA-0603 ?
I have Ubuntu 10.04 LTS
However I am having some issues with drivers. I need to install a Patriot Wireless N USB wireless adapter in Crunchbang but when I follow the directions for installing the drivers and am using the command "make" I get an error that says '*** /lib/modules/2.6.32-5-amd64/build: No such file or directory. Stop . *** [modules] Error 2"
View 1 Replies View Relatedtime Windows user here; limited line command experience from early computer learning; Just wiped my drive and installed Ubuntu. How do I install a driver for the netgear wireless adapter - it was already installed in the machine. I've downloaded the driver believed to work. What next? Also, any instruction on educating myself on Linux/Ubuntu basics?
View 14 Replies View Relateddownload and instal tp link wn321g wireless adapter for ubuntu
View 1 Replies View RelatedI'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
I have Problem with connection Wireless.I can't install wireless adapter.Now i'm installed Backtrack3.How i can Configure wireless adapter.
View 2 Replies View RelatedI'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.
View 9 Replies View RelatedInstallation of my wireless USB trendnet adapter
View 2 Replies View RelatedI have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
Im currently unable to install a wireless USB network adapter because it requires an installation which can only be done with a cd and im not sure how to install the software to run the wireless adapter.
View 1 Replies View RelatedI want to install the DLink N150 (DWA-125) Wireless USB adapter in Ubuntu 9.04 if if go to
system-> administrator->log file viewer->dmesg
[ 8.840794] type=1505 audit(1286918554.305:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2041
[code].....
i don't know how to enable wireless.
Was wondering if anyone had a idea on how to install this wireless adapter onto a computer thats running Ubuntu. I don't have access to a direct connection so that won't work. So I need a way that I could install it without internet, I do have access to another computer that i could get files off of if needed.
View 5 Replies View Relatedconfiguring my ASUS USB-N13 Wireless-N Adapter I was able to get the drivers installed as per the instructions I found in the forum but I'm not sure how to get the ASUS USB-N13 Wireless-N Adapter to be recognized by the drivers and how to configure it to connect to the Internet I tried following the instructions it came with but I did not understand the steps to set it up it was like chinese to me no clue what it said I am running Redhat Linux 9.0 on the laptop
View 6 Replies View Relatedi need to install an Zyxel G220 V1 which is a wireless adpater.I plug it on the usb and the dmesg i have this:
[ 2025.463349] usb 1-1: firmware: requesting zd1211/zd1211_ub
[ 2025.469375] usb 1-1: firmware: requesting zd1211/zd1211_ur
[ 2025.493491] usb 1-1: firmware: requesting zd1211/zd1211_uphr
[Code]....
I'm trying hard to get my new usb wireless adapter to work with my ubuntu desktop 9.04.
sudo apt-get install linux-headers-generic git-core libssl-dev
Next, download the drivers for the tool-chain
cd /usr/src/
sudo git clone git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/otus.git
[code].....
my wireless network appear disabled in the network list. There is one network in the list enabled which is using WEP. I think this is because my network is using WPA or WPA2 and that the installed driver needs a suppleant driver to work correctly. I dowloaded the driver package from DLINK [URL] Now when I open the package I see that there is a wpa_supplicant-0.4.8_otus.tar.gz. Untaring it gives me a folder with source code...
I am a complete novice when it comes to Linux. I have just installed Debian 5 and i would like to get the wireless adapter working. I have a Ralink RT2070 54Mbs Wireless USB Adapter and the driver disk. What are the steps/commands i must follow to install the driver please?
View 15 Replies View RelatedI need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2
View 7 Replies View RelatedI was wondering how to install the Rosewill RNX-N180UB wireless adapter?
[URL]
It works on a XP PC, but not on my Ubuntu workdesk without playing with the code. I have downloaded the package
I have a laptop that I don't use anymore so I figured I would use it for trying to get used to the command line in Linux. The lspci line for my WiFi adapter is:
Quote:
02:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
When I run iwconfig to see if my adapter is getting picked up I only get an output for the loopback interface and my Ethernet port. I installed the following packages which I thought would be enough to get it working:
Quote:
b43-fwcutter, broadcom-sta-common and broadcom-sta-source
I was able to get it working in a regular Ubuntu installation, but it doesn't seem to pick it up in this install. Does anyone have any tips/advice? I went with the minimal install because I wanted to see how lightweight I can get the OS.
I really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory
USB Adapter - Netgear WNDA3100-100NAS = v2
The adapter works under W XP with no problems
The router, Linksys WRT54G sees the adapter in the dhcp table
lsusb lists the adapter.
I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.
I just got my desktop set up with Ultimate Edition, an OS based on Ubuntu. For more information on my OS, please click: here. I am using UE version 2.6, which is based on Ubuntu kernel 2.6.32, so any Ubuntu users.I've gotten my wireless usb keyboard and mouse to work fine, and my speakers are ok, so I know my usb hardware is working properly. The Situation: I can't get my new ASUS USB-N10 wireless adapter to work. My computer hasn't recognized it, and there are no usable instructions on the driver CD for installing the device in Linux.ASUS claims this adapter works on Linux systems with 2.6-type kernels, but I've been trying for 2 weeks to no avail.
View 6 Replies View Relatedhow to use my alpha awus036nh wireless adapter in bt3 that i am running from cd, whenever i try to scan for aps the built in adapter kicks in.
View 1 Replies View RelatedI downloaded from the following link: [url]... etinst.iso and i have a working flash drive Debian installer. I would like to be able to integrate driver support for my wireless adapter or my gprs phone for internet access during install so that I wont have to be connected via ethernet.
View 2 Replies View RelatedThis is the wireless card that came with my Toshiba Satellite L655D-S5093. First check to see if you have the correct driver. Run
[Code]....
I just acquired a Wi-Fire long-range wi-fi adapter, and I would like to test it with my Ubuntu desktop computer. However, my machine defaults to using an internal, discrete wireless card (not hard-wired into the motherboard.) How can I set my new wireless adapter as the default wireless connection? How can I disable my internal wireless card (without opening my computer case)?
View 1 Replies View RelatedI just loaded Fedora 10 onto my laptop and now I'm trying to add a USB wireless adapter with little to no luck (well no luck at ALL.)
# lsmod
Module Size Used by
nls_utf8 5632 0
fuse 49436 2
bridge 43796 0
[Code].....
I am new to linux and backtrack 4 and I didn't have a hard time installing it but my question is that I cant see my wireless adapter at all even in vmware settings. I am using Vmware player, backtrack 4, Gateway netbook LT2030u and my wireless adapter is Atheros AR5B95.
View 6 Replies View RelatedBuffalo's NfinitiTM Wireless-N Ultra-Compact USB 2.0 Adapter!!Do any of you having this working in Linux?
View 1 Replies View RelatedDell D630 not seeing the wireless adapter
View 1 Replies View RelatedI have been all over the internet trying to find a wireless adapter that will work with my older Toshiba notebook. I have several but none seem to be recognized. I am willing to purchase one and I would like it to work out of the box.
View 12 Replies View Related