I have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
Im currently unable to install a wireless USB network adapter because it requires an installation which can only be done with a cd and im not sure how to install the software to run the wireless adapter.
Was wondering if anyone had a idea on how to install this wireless adapter onto a computer thats running Ubuntu. I don't have access to a direct connection so that won't work. So I need a way that I could install it without internet, I do have access to another computer that i could get files off of if needed.
I am a complete novice when it comes to Linux. I have just installed Debian 5 and i would like to get the wireless adapter working. I have a Ralink RT2070 54Mbs Wireless USB Adapter and the driver disk. What are the steps/commands i must follow to install the driver please?
When I run iwconfig to see if my adapter is getting picked up I only get an output for the loopback interface and my Ethernet port. I installed the following packages which I thought would be enough to get it working:
Quote: b43-fwcutter, broadcom-sta-common and broadcom-sta-source
I was able to get it working in a regular Ubuntu installation, but it doesn't seem to pick it up in this install. Does anyone have any tips/advice? I went with the minimal install because I wanted to see how lightweight I can get the OS.
I really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory USB Adapter - Netgear WNDA3100-100NAS = v2 The adapter works under W XP with no problems The router, Linksys WRT54G sees the adapter in the dhcp table lsusb lists the adapter.
I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly. 2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page. 3) From terminal I typed "cd Desktop" to change the directory to the desktop. 4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb" 5) This installed Windows Wireless Drivers gui successfully and I can access it. 6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed. 7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder. 9) Upon mousing over the network Icon naturally my hardware is still not present. 10) From what I gather after the system finds the hardware I am to write into the terminal
However I am having some issues with drivers. I need to install a Patriot Wireless N USB wireless adapter in Crunchbang but when I follow the directions for installing the drivers and am using the command "make" I get an error that says '*** /lib/modules/2.6.32-5-amd64/build: No such file or directory. Stop . *** [modules] Error 2"
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
I have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).
I've got a couple of old PC's running Ubuntu but I want to give them wireless capability and move them to a different room. What is the easiest wireles adapter to use? I'm thinking USB would be easier than opening the boxes to install cards, plus I could buy one adapter and try it with both PC's to make sure it works, then buy a second one once I know it works.
I'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.
I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 220.127.116.11-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
My netbook have an internal wireless receiver, but from my room it doesn't work well, so I bought a TP Link TL-WN422G hoping it receives better. Ubuntu sees it but I don't know how to force using it.. I attach lsusb with peripheral in bold: