General :: Entered An Incorrect Password Too Many Times Trying To Us SSL VPN?
Jun 21, 2011
I just got a new laptop for work that dual boots with Windows 7 and Ubuntu 10.10.Normally, I can use an sslvpn connection to log onto my office servers to transfer data back and forth through Windows. However, I do my actual work on Linux, which the computing services department at the university where I work has not set up a sslvpn connection method for.I got the JRE set up on Linux and loaded up the sslvpn connection when I was asked for my sudo password. After following some other instructions, I created a different password to act as root.I entered that password over and over again and now I'm not able to attempt to connect again by trying another password.
I'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.
I have set up a new account, with a user name of Benjamin.However, when running a sudo command, while logged in with the user name 'Benjamin', I receive an incorrect password error.Yes, I am entering the password for user name 'Benjamin' and not that of the root account.
I had the CAPS Lock on accidentally during my Ubuntu installation, when I entered in the root password it was with CAPS.Now I am stuck having to hit the CAPS lock back and forth for password entry to perform various sudo tasks.I have tried several methods below:(not my real password) Current password in CAPS: 2HOTDOGS Desired password: 2hotdogs
I'm trying to connect to my windows 7 computer via network from ubuntu 10.04. I get as far as this screen:
My problem is it always says I've entered the wrong password. I've tried the administrator account password and also the long windows 7 homegroup password.
Recently I was trying to download some software from Ubuntu Software Center. I found the app I needed, pressed install, entered my password and then i got an error window with this written in it: 'The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.'
The problem is that I don't remember what I downloaded or when I did it.
I'm running Ubuntu 10.4 Netbook Remix on a Dell Mini Netbook 9 (I think that's what it is.) I used to be able to connect to my wireless internet fine, but then my brother put a password on it. So there's a little box that comes up and tells me to enter a password now. I do, and it tries to load for a minute and then wants me to enter my password again. It just keeps going like this.
This is mostly an FYI. I have been messing around with an old desktop to see what I could do.
I installed an image of XP, then tried installing Ubuntu. I chose the option to install along side XP, and adjusted the partition size. The install gets to the point where I create my password, and I get exactly 4 characters entered in the first password field and it freezes. It did the same thing on two consecutive installation attempts.
The login cycles- I already have a problem with mounting something connected with USB (long term minor annoyance, but everything works), but suddenly I cannot log in. When I put my username and password in, the screen flashes black for about half a second, then the login screen re-appears. If I put the wrong password in, I get an authentication error message (as expected) without turning black and then cycling again.
I have no problems going into terminal mode and logging in. I've tried all sorts of suggestions related to this problem- reinstalling ubuntu-desktop, apt-get clean, sudo startx, and the last indicates that x-windows is already running. I've found a couple more things to try, but I'm not too sure how well they'll work. It seems to be connected with x-windows, but I don't know what is causing it. Last night I had a big problem that required reinstalling nautilus (couldn't set up a connection to a remote server), and that problem was fixed- but this developed when I booted this morning.
When I try to connect to my ubuntu server with my mac, I always get "You have entered an incorrect username or password, please try again". The same problem occured when I tried to connect to another mac server at my school. Is this a mac wide problem? Anyone else experienced this problem?
I've tried to do the installs using Unetbootin, LiveUSBcreator, and Startup Disk creator and the Install program from within the distros themselves, regardless of installation method the same problem returns. So I do not think the problem is related to method of installation.
Maybe it's hardware? I've tried a total of four different motherboards, (an MSI, 2 Gigabyte and an Asus) all with updated BIOS, all 4 of which work perfectly fine with normal Linux installations to the HD. I have no troubles running any of the above distros when installed to a hard drive.
The problem comes when I install to a thumb drive. Which thumb drive? Take your pick. I've used Sony, SanDisk, Kingston and a handful of cheaper brands in sizes from 2G up to 16G. The problem always returns regardless of the hardware involved. Therefore I do not think the problem is related to hardware.
I want a fully functioning installation of Linux on a thumbdrive. (I do not simply want a Live CD copied to a thumbdrive.) This will allow me to make changes to the software/settings and have those changes remain after rebooting. I'm able to do this just fine, and everything works perfectly until the third, fourth, or fifth reboot. At this point I enter my password and my password is no longer accepted. Sometimes the screen flickers a little, sometimes it just reloads the prompt. But it doesn't let me in. At this point it's Game Over. All the hard work installing and tailoring the install is down the drain. Yes, I've searched and found threads of this similar problem. Many of them go back to 2005 or 2006. The vast majority of them are people begging for help, receiving a few suggestions, finding no resolution and then the thread just dies. Honestly I've spent many, many hours following outdated advice that has, on occasion, worked, but only temporarily. The problem always returns. Something is seriously screwed up and I can't be alone.
So here I sit with a brand new 4Gb Sandisk that up until last night had a beautifully running Ubuntu 10.10 installation. And yet, voila, my password is now no longer good enough. It simply will not let me log on. I enter it, hit enter, and the log-in screen simply reloads itself.
I have built a linux image based on kernel 2.6.32.10. The image boots up fine & at the login prompt when I enter the login Id - the system doesnt prompt for password - instead throws an error message "Login incorrect".
From all the search I did, I narrowed this down to be a pam configuration issue. I checked that the /etc/securetty has an entry "/dev/ttyS0" to allow root to logon via serial console - so I ruled out this file to be a cause for that error. Few files that I am not entirely sure are as below:
i downloaded alinux 14.0 and when i restarted my pc to install it,it asked for login and password and i tried many and many of them but it always give the same message "the password is incorrect"
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
Code: Select all:~$ su Password: #Typed user password su: Authentication failure ~$ su Password: #Typed root password su: Authentication failure :~$ sudo su
[Code] ....
The file does open but with a warning in red saying i could harm my system. Had almost got everything configured just as like it, tried adding a custom action (open as administrator) to Thunar and my house of cards collapsed around me.
Debian 8 xfce, single user account, passwords and user names are single characters so it's a given there's no typing error.
Code: Linux tmif3 2.6.9-5.ELsmp #1 SMP Wed Jan 5 19:29:47 EST 2005 x86_64 x86_64 x86_64 GNU/Linux I added a user useradd billy because I don't like being root. I changed the password using passwd billy all as normal. when I try to logon, ssh rsh I cannot. even as root with an su - yields the following..
I'm trying to install the driver for my Lexmark prospect Pro-205 printer which I downloaded from the Lexmark site but when I type in my administrater password it keeps saying wrong password while I know it's the right password!
I don't know how I've managed to mess this one up, but in the midst of securing my webserver (ie. changing default SSH port, add new user, disable root SSH) I seem to have broken su functionality....somehow.
When I ssh as my user "lockdown" I attempt to "su -" and immediately am prompted with "su: incorrect password"
Code: lockdown[ at ]bag [~]# su su: incorrect password lockdown[ at ]bag [~]#
I re-enabled root SSH login (via editing /etc/ssh/sshd_config) and I'm able to SSH as root no problem, however I can't su even from root to another user, getting the same behavior and error message..
Code: root[ at ]bag [~]# su lockdown su: incorrect password root[ at ]bag [~]# Here are my permissions for /bin/su ... Code: root[ at ]bag [/]# ls -l /bin/su -rwSr-xr-- 1 root wheel 28336 Feb 28 2010 /bin/su* My user "lockdown" is a member of the wheel group, and I haven't edit /etc/pam.d/su or system-auth at all.
I've been using checkgmail package on my f10 (x86_64) box for a while now without problems. But all of a sudden, I see a pop-up windowtating: incorrect username or password. No matter how many times I enter my usernamend password the window keeps coming back demanding for the same. My system is up to date and I've rebooted my system a few times, but the problem persists.
I am trying to install a new printer and delete my old one. It keeps asking for my password, I enter the same one that I log on with. It keeps telling me that the password may be incorrect. To my knowledge, I only know the one that I log on with. Does anyone know what the heck this thing is talking about?
My root filesystem recently filled up. I finally established why - that my /media directory had filled up due to the USB-attached device having been unmounted for whatever reason, and SimpleBackup tried backing up without the mount in place - thereby filling up the filesystem.
I discovered that the root directory was full when the machine tried to get updates, and couldn't. So, I went into /media and tried to delete the backup directory and file(s) that were in that directory, but it tells me that permission is denied. So I try to SUDO the same command, and it tells me 3 times in a row, "Sorry, try again", followed by "sudo: 3 incorrect password attempts".
I installed Ubuntu Server 10.10 with the GUI on a spare box I had. This is my first experience with Ubuntu. I have never used Linux before this. The system works great and logging on is no problem. However I installed 2 applications, gparted and samba. When I go to open either application I enter my logon password and I am told that the password is not correct. I am the only user on this machine and went to the accounts setting and changed my account type from custom to administrator to no avail.
I formatted my drive and reinstalled the whole thing again and got all available updates also. I reinstalled gparted and samba a second time on the new install and I still am told that the password is incorrect again when opening thes apps. Is there a simple, easy to understand way for this first time Ubuntu 10.10 user to correct this. There must be a minor flaw in this OS that is denying me use of my apps.
I am trying to setup 2-factor authentication for SSH with PAM. Its working well, but if the password is incorrect, it does not ask for validation code, but rather asks for the password again. Any way not to warn about an incorrect password?
today i got this message everytime i try to login to yahoo messenger:"gyachi invalid user or incorrect password !" The user and password are corect, if i switch to kopete or pidgin is all right.Only with gyachi i have that problem. Using Fedora 10, gyachi improved v1.2.3
I'm using Fedora 12 KDE, and I'm trying to connect a Lexmark printer. It's a printer that I can connect to in other KDE distros. When I try to connect to it through the system settings printer manager I get a popup window that says, "Password may be incorrect", and then it goes to the new printer window. However, there is no option for a lexmark printer, lpd, ipp, or anything in the left menu bar. There's only an option for other, and a little box that asks for the uri. Am I missing a package, or is this normal behavior? Do I have to somehow open this up in sudo? Am I missing a package? I have cups, foomatic, and ghostscript installed.
Got latest version of ubuntu, installed skype and i keep logging in it keeps saying incorrect pw. than i made a new account and tried that, still incorrect pw?
After locking my GUI session, if I type my password incorrectly when I come to unlock it, the system often (not always) seems to hang for a long time, with the text "Checking..." displayed. The length of time can be many minutes.The system is not actually frozen - if I hit CTL+ALT+F6 I can log on to a console session, from which I can see a tty7 process (i.e. the GUI session) using the 'ps' command. Sometimes the only way I can recover is to kill this process, upon which a new GUI session starts up, but this is undesirable as I lose any open applications.
