I'm completely new to oracle and need to install oracle 11g onto my Linux box. But my Linux box currently has no X Term (KDE or Gnome).
Is there a way in which I can install this without the GUI ?
I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedI am going to install Oracle RAC on two Servers, With shared SAN storage (Servers and Storage is IBM) OS = RHEL 5u5 x64 bit
And we used multipathing mechanism and created multipathing devices. i.e. /dev/mapper/mpath1. Then I created raw device /dev/raw/raw1 of this /dev/mapper/mpath1 Block device as per pre-reqs for Oracle Cluster. Every thing looks good, But we faced the performance issue as under.
when we run command :
#dd if=/dev/zero of=/dev/mapper/mpath1 bs=1024 count=1000
the writing rate is approx. 34 MB/s
But If we run command
#dd if=/dev/zero of=/dev/raw/raw1 bs=1024 count=1000
the writing rate is very slow like 253 KB/s
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies View RelatedI'm trying to configure DNS on Oracle Enterprise Linux 5.4 - Kernel 2.6.18-128.el5. When I restart the named service, I'm not getting any errors. But service is showing Failed. What could be the reason?
View 3 Replies View RelatedI have an issue with few servers. All have OEL 5.5 and various versions of oracle (mainly 10g something).
I've noticed on one machine that amount of free memory is slowly decreasing. When it comes to less then 30M, application has problems. Ive tried adding mem on this machine (virtual), and it behaves the same.
The same is on physical machines I have simmilar, if not the same config. Variations are with physical memory installed, and it does not matter if servers have 2G, or 8G, free -m gives around 30 free
It does not swap, and does not make some big issues on other machines, but on this one, application that uses this DB timeouts the user. Is there some chance to check what is creating this issue?
P.S. I've tried with DB admin to check something related to oracle itself, bit when we shutdown instance, Oracle frees 1.5G allocated to him, but nothing else. Will try testimg a bit more, but any thought on this is usefull. This is production server, so no big issues can be done. Will try to copy it to other hardware and do some testing, but then no App server available to attack it.
I am running a 5 node 11g RAC cluster with cluster ready services. The hardware is HP BL460g6 with virtual connect modules on each chassis. The OS is RHEL5.5, 2 Qlogic 4G fibre cards, 2 Broadcom NICs bonded, and the backend disk is all Hitachi 15k. The issue that I'm seeing is periodically each day there are spikes in I/O waits for disk writes, and sometimes that will cause a node or 2 to reboot when CRS can't communicate with the other nodes. Both nodes that have been evicted, are on the same chassis. What I've checked is, the backend storage is not seeing ANY high utilization, in fact it's running at less than 10% all the time. The network is 10G, and is not showing errors on the switch, or on the blades themselves. The redo logs have a 10M buffer cache, and are running on ASM disk. What other information would be beneficial to check? I am seeing nothing in the logs as to any errors, or waits for disk writes. I believe it's a software issue, but am lost as to how to prove it. These aren't the only nodes experiencing periodic high I/O waits, and it happens at the exact same time on all systems, whether they run ASM or are part of a cluster.
View 1 Replies View RelatedI just found that PMON and SMON are running (i.e., showing in the output of ps -ef | grep -i [o]ra)but when I check MMAN (used for internal database tasks), nothing comes up:
Code:
ps -ef | grep -i [m]man
Is that okay or could there be some problem?
So, what are the essential processes of an Oracle Databse that we must check for their status to make sure that the Oracle Databse is up and running fine? What steps do you usually take to validate an Oracle Databse on a Unix / Linux (Production) Server (specifically immediately after a CR has been worked upon)?
I need to know that how to use my micromax MMX 352G (USB MODEM) in oracle linux. i am unable to detect my modem using wvdialconf.
View 2 Replies View RelatedThe Default Template for installing Oracle VM Server has 10GB, what are the factors to take into account when considering sizes. I have only seen one installation, and 2 sizes were changed to 23072 and 5000. How can I see these settings?
View 1 Replies View RelatedDoes the RHL 8.0 version supports the Installation of Oracle 10g
View 3 Replies View RelatedStartx by non-root user account in red hat linux kernel 2.6. How can I use the command "startx" by other user account such as "oracle"? I cannot startx by user account oracle?
Code:
[oracle@localhost ~]$ startx
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do not have console ownership?
Please consult the The X.Org Foundation support at [URL] for help.
[1]+ Stopped startx
[oracle@localhost ~]$
I'm trying to install Oracle DB on my Open Suse (uname says: Linux-llwu 2.6.34.7-0.3-desktop preempt 2010-09-20 .. 86_65 x86_64 x86_64 gnu/linux) but it fails when it need to check package requirements.. for example, installation says that libaio-0.3.105 is missing, but I installed it (0.3.105-2), and could upgrade it to 0.3.107-4.1 how should I fix this problem?
View 9 Replies View Relatedi want to install oracle 10g in my ubuntu 9.10.
View 5 Replies View RelatedCan i install oracle 10g in fedora using the cd i used to install in xp...
View 2 Replies View RelatedI am not an oracle DBA, but need to find the cause of high load avg, even after adding more CPU power the load avg is the same.
Old and new servers load avg is the same (between 6-10 peak hours and 3 to 5 during off-peak hours) no difference. I expected the laod to come down as we added more CPUs.Our DBA says queries are optimise.Can some Oracle DBA give some tips to find the cause.
I have oracle installed on Linux I want to schedule a script "backup.sh" to run in oracle user.
oracle@linux1]crontab -e
*/2 * * * * /tmp/backup.sh
this script does not execute by cron.
But
oracle@linux1 tmp] ./backup.sh ------executes successfully
I don't know why the script is not being executed by cron.
We have a Wipro Net Power 8552 server on RAID 5 with Linux Advanced Server. The Databse is Oracle . Every time the reocovery is made the block corruption error gets changed. There are four hardisk in the Raid with 18 GB capacity of Quantum make. I want to make sure if any Utility is there in Linux to check the Harddisk if any Block corruption is there or Not.
View 1 Replies View RelatedInstalling Oracle iPlanet Web Server
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
I'm newbie in Debian. I downloaded Debian 5.0.4 Lenny and installed in VM(i dont know why but i couldnt install it on other partion of my windows 7. During installation i got error that CD-ROM wasnt detected and mounted but VMware could install without issues. I thougt problems were with drivers...).Now my Debian is running through the VM. I want to install Oracle 10g Enterprise Edition there, so i found this article http://www.makina-corpus.org/blog/how-i ... 10-64-bits and confugured my kernel and installed some packages. But during installing Oracle i got 2 error and in log file were some string that some packages werent installed, such as libaio and etc. where i can find list of this packages and how to correctly install Oracle on my Debian.
View 1 Replies View RelatedI am new to linux and i wish to install oracle 9i in fedora 12 can anyone provide me the details of where and how to download oracle 9i and installation steps
View 6 Replies View RelatedI need to install Oracle on my F15 machine however when I try and run the installer it gives erros that DISPLAY is not set, so I tried adding using XHOST + but that also states no display setting, any idea what i am doing wrong?
root@hrdevdba1 network-scripts]# export DISPLAY=10.171.108.6:0.0
[root@hrdevdba1 network-scripts]# xhost +
xhost: unable to open display "10.171.108.6:0.0"
[root@hrdevdba1 network-scripts]# export DISPLAY=:0.0
[root@hrdevdba1 network-scripts]# xhost +
[Code]...
just got a quick question: I need to install Oracle's SQL Developer since I need to use the program for a database unit at Uni. Anyway, if you've tried to use it before you'd realise that there is only a .rpm installer available for it (no .deb). So I tried to convert it to .deb using alien. When I "sudo alien --scripts" the .rpm I get: error: incorrect format: unknown tag mkdir: cannot create directory `sqldeveloper-2.1.1.64.45': File exists unable to mkdir sqldeveloper-2.1.1.64.45: at /usr/share/perl5/Alien/Package.pm line 257.
Basically, I'm asking, does anyone know what I'm doing wrong here? I've never used alien before since I've never had a need to convert a .rpm before. I also tried installing and running Java JDK and SQL Developer under Wine, but was unsuccessful with that as well
here's my setup: 32 bit Ubuntu 10.10 with an AMD 2.7GHz processor, and 2GB of RAM.I get Oracle 11G R2 installed, except two things fail near the end of the installation (I think they're both Oracle Net services or something. I broke a cardinal rule by not writing them down. ) I try to use sqlplus through Terminal, but the system can't find sqlplus. I'm assuming it isn't installed. I'm unable to connect to it through JDeveloper.
View 2 Replies View Relatedi need to deploy oracle packaged thorugh unix instead of using SQLplus where in you can directly type the commands.
View 4 Replies View RelatedI tried to install oracle 11r2 in red hat el5. [root@perf Downloads]# uname -a Linux perf.com 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux
some of the prerequisite patches are not updated
Current Requirements
gcc-4.1.1-52.el5 gcc-4.1.2
libgomp-4.1.1-52.el5 libgomp-4.1.2
glibc-2.5-12 glibc-2.5-24
[Code].....
we need the following files,where can i download it?
I serached in net.but there is no use.most of them related to fedora core
i want install oracle 10g to redhat 5 i want to change bash_profile.but I can't find it when I looked to the /home/oracle/..
View 2 Replies View RelatedI am new to Linux and need ssh graphical that will alow me to install oracle on the new linux server
View 3 Replies View RelatedI need to check with nagios an oracle database that is located on a server. There are a lot of plugins that are provided, the problem is that the database is located on a remote server (i have an hostaddress) and then i need to log on the database (i have username and pass)So i only need to have a plugin that connects to that hostaddress and logs on, but i can't find any plugin which does that
View 14 Replies View Related