The Default Template for installing Oracle VM Server has 10GB, what are the factors to take into account when considering sizes. I have only seen one installation, and 2 sizes were changed to 23072 and 5000. How can I see these settings?
View 1 Replies
I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedI just found that PMON and SMON are running (i.e., showing in the output of ps -ef | grep -i [o]ra)but when I check MMAN (used for internal database tasks), nothing comes up:
Code:
ps -ef | grep -i [m]man
Is that okay or could there be some problem?
So, what are the essential processes of an Oracle Databse that we must check for their status to make sure that the Oracle Databse is up and running fine? What steps do you usually take to validate an Oracle Databse on a Unix / Linux (Production) Server (specifically immediately after a CR has been worked upon)?
I need to know that how to use my micromax MMX 352G (USB MODEM) in oracle linux. i am unable to detect my modem using wvdialconf.
View 2 Replies View RelatedI need to check with nagios an oracle database that is located on a server. There are a lot of plugins that are provided, the problem is that the database is located on a remote server (i have an hostaddress) and then i need to log on the database (i have username and pass)So i only need to have a plugin that connects to that hostaddress and logs on, but i can't find any plugin which does that
View 14 Replies View RelatedI'm trying to configure unixODBC on Linux rehat EL 5 32 bit to connect to an Oracle 10g database server. But when I retest the connection after the configuration then The error occurs:
# isql -v oralab4_dns vonphot vonphoto
isql: symbol lookup error: /usr/lib/libreadline.so.3: undefined symbol: PC
I have searched on Google.com for 2 days but I can't resolve the problem.
I have a physical drive of about 40GB, I want to create a partition of 10GB with FDISK on this drive.
View 2 Replies View RelatedI've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
So the first 10Gb of a 450GB NTFS partition have just accidently been written over with an Ext4 filesystem that spans the entire partition instead. all foolishness asside, what can be repaired. Now I know Ext4 likes to jot bits of meta-data down (inodes blocks) along the way, and this can be about 5% of drive capacity, that said, there's alot of small text files and stuff, coe files so forth that can surely be recovered
I've looked into magicrescue and testdisk, but they fall into the only two groups to exist:
1) Filesystem independent, that is search almost like a patern - well exactly like a pattern match, to find the header and footer of files.
2) Filesystem recovery tools, like, damaged bootsector, so forth
I need one, that will be able to extract files, Iunderstand this will be a hard task, but.... text files; surely that'll be easy, anyway. This is my backup drive, they''re both WD you see, anyway. This is important, given the coding is ASCII surely.
there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies View Relatedi have 2 harddrives. a 6gb and an 11gb. IDE ATA. i want to install opensuse 11.2 on them, using EXT4, in a different way this time. i want the "/" partition to cover all of the 6gb, with the drive set to master. For the slave, I want the "/home" partition on the 11gb, covering only 10gb on the beginning of the drive, and i want the swap space partition on the end of the drive using 1gb. Is this a smart way to install it? Will i have to continuously mount the drive with home and swap on it? What is the best configuration for using these two drives?
View 9 Replies View RelatedI'm completely new to oracle and need to install oracle 11g onto my Linux box. But my Linux box currently has no X Term (KDE or Gnome).
Is there a way in which I can install this without the GUI ?
I'm trying to configure DNS on Oracle Enterprise Linux 5.4 - Kernel 2.6.18-128.el5. When I restart the named service, I'm not getting any errors. But service is showing Failed. What could be the reason?
View 3 Replies View RelatedI have an issue with few servers. All have OEL 5.5 and various versions of oracle (mainly 10g something).
I've noticed on one machine that amount of free memory is slowly decreasing. When it comes to less then 30M, application has problems. Ive tried adding mem on this machine (virtual), and it behaves the same.
The same is on physical machines I have simmilar, if not the same config. Variations are with physical memory installed, and it does not matter if servers have 2G, or 8G, free -m gives around 30 free
It does not swap, and does not make some big issues on other machines, but on this one, application that uses this DB timeouts the user. Is there some chance to check what is creating this issue?
P.S. I've tried with DB admin to check something related to oracle itself, bit when we shutdown instance, Oracle frees 1.5G allocated to him, but nothing else. Will try testimg a bit more, but any thought on this is usefull. This is production server, so no big issues can be done. Will try to copy it to other hardware and do some testing, but then no App server available to attack it.
I am running a 5 node 11g RAC cluster with cluster ready services. The hardware is HP BL460g6 with virtual connect modules on each chassis. The OS is RHEL5.5, 2 Qlogic 4G fibre cards, 2 Broadcom NICs bonded, and the backend disk is all Hitachi 15k. The issue that I'm seeing is periodically each day there are spikes in I/O waits for disk writes, and sometimes that will cause a node or 2 to reboot when CRS can't communicate with the other nodes. Both nodes that have been evicted, are on the same chassis. What I've checked is, the backend storage is not seeing ANY high utilization, in fact it's running at less than 10% all the time. The network is 10G, and is not showing errors on the switch, or on the blades themselves. The redo logs have a 10M buffer cache, and are running on ASM disk. What other information would be beneficial to check? I am seeing nothing in the logs as to any errors, or waits for disk writes. I believe it's a software issue, but am lost as to how to prove it. These aren't the only nodes experiencing periodic high I/O waits, and it happens at the exact same time on all systems, whether they run ASM or are part of a cluster.
View 1 Replies View RelatedDoes the RHL 8.0 version supports the Installation of Oracle 10g
View 3 Replies View RelatedStartx by non-root user account in red hat linux kernel 2.6. How can I use the command "startx" by other user account such as "oracle"? I cannot startx by user account oracle?
Code:
[oracle@localhost ~]$ startx
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do not have console ownership?
Please consult the The X.Org Foundation support at [URL] for help.
[1]+ Stopped startx
[oracle@localhost ~]$
I am not an oracle DBA, but need to find the cause of high load avg, even after adding more CPU power the load avg is the same.
Old and new servers load avg is the same (between 6-10 peak hours and 3 to 5 during off-peak hours) no difference. I expected the laod to come down as we added more CPUs.Our DBA says queries are optimise.Can some Oracle DBA give some tips to find the cause.
I have oracle installed on Linux I want to schedule a script "backup.sh" to run in oracle user.
oracle@linux1]crontab -e
*/2 * * * * /tmp/backup.sh
this script does not execute by cron.
But
oracle@linux1 tmp] ./backup.sh ------executes successfully
I don't know why the script is not being executed by cron.
We have a Wipro Net Power 8552 server on RAID 5 with Linux Advanced Server. The Databse is Oracle . Every time the reocovery is made the block corruption error gets changed. There are four hardisk in the Raid with 18 GB capacity of Quantum make. I want to make sure if any Utility is there in Linux to check the Harddisk if any Block corruption is there or Not.
View 1 Replies View RelatedI am going to install Oracle RAC on two Servers, With shared SAN storage (Servers and Storage is IBM) OS = RHEL 5u5 x64 bit
And we used multipathing mechanism and created multipathing devices. i.e. /dev/mapper/mpath1. Then I created raw device /dev/raw/raw1 of this /dev/mapper/mpath1 Block device as per pre-reqs for Oracle Cluster. Every thing looks good, But we faced the performance issue as under.
when we run command :
#dd if=/dev/zero of=/dev/mapper/mpath1 bs=1024 count=1000
the writing rate is approx. 34 MB/s
But If we run command
#dd if=/dev/zero of=/dev/raw/raw1 bs=1024 count=1000
the writing rate is very slow like 253 KB/s
Installing Oracle iPlanet Web Server
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
We have a Dell PE6600 with a QLA2460 FC HBA in it. Server is running RedHat AS 4.7 (kernel 2.6.9-78), FC driver used is the file qlafc-linux-8.02.23-3-install.tar downloaded from the QLogic website. On this server is an Oracle database running (11.1.0.6). Files for the Oracle database are located in mountpoint /u02. The SAN is an iQStor 2880. Since several weeks we suddenly have problems with the Oracle database after a reboot of the server. After a reboot the mountpoint /u02 is readable and writable (tested by creating, opening and removing files).
However, when we try to start the database we get an error which give you the idea that the database is corrupt. The Oracle error is quite a general error. After doing a lot of testing we found out that if we unmount /u02 and mount it again (using mount -a so it reads the /etc/fstab), the database can be started after all. So the database is not corrupt but for some weird reason we have to remount /u02 first before the Oracle database can use it. We don't know if it's a linux issue, fibre issue, san issue or an oracle issue.
I have installed Redhat Enterprise Linux Server 5 on my laptop. I want to install Oracle 10g database on RHEL5 server. I want to know whether any additional rpm's need to install before installing the Oracle 10g.
View 1 Replies View RelatedCould anyone give the steps for converting a logical volume to a raw disk to mount Oracle ASM Instance on it?
View 2 Replies View RelatedI am attempting to remote in to my sister's netbook using Remmina remote desktop client on both linux mint pc. I get prompted for a VNC password, but I do not know what it is, or where were I could change it. what the default password is or how I could change the password. UPDATE 09/18 10:25 EST-clients web site doesn't provide this information.
View 1 Replies View RelatedI've set up home server, which doesn't have to be as powerful as other servers, so I decided to install GUI because of applications that are alternatives to classical GUI applications in headless version requires more skill/knowledge. However, I don't want server to run GUI always at start (which gnome-desktop package does). I need some configuration in KDE/gnome/xfce (haven't decided) that doesn't start GUI after each start (e.g is required to type startx or equivalent command to start GUI)(off topic: can you also recommend good remote-administration with GUI transport ?)
View 1 Replies View RelatedDoes anyone know Oracle e-Delivery (link below)? It looks like free download of linux is available form this site.
[URL]
1. What is the difference between Oracle Linux x86 32 bit and x86 64 bit?
2. How can I verify which one (x86 32 bit vs. x86 64 bit) I need for my PC?
3. What's the difference between the two below (one with Source and the other without 'Source')? I am trying to figure out which one I need.
- Oracle Linux Release 5 Update 2 for x86_64 (64 Bit)
- Oracle Linux Release 5 Update 2 Source for x86_64 (64 Bit)
I installed Oracle Linux 5 and now I can not boot into Vista. However if I use Debian Live CD Vista is there and looks fine (as far as I can see). Is there a way I can use a live CD to fix grub? I have googled it but none of the commands I found worked.
View 9 Replies View RelatedMy Setup: Dell Laptop (BIOS allows boot from USB) - Vista 32 bit installed, 4 GB memory
External 500 GB HDD (iOmega) - Partitioned as follows:
NTFS: 50 GB
/boot: 1 GB
below two on one logical volume:
swap: 5 GB
/: rest ~ 440 GBI installed Oracle Enterprise Linux on the external HDD.
Did not install the Grub bootloader as I don't really want a startup boot option. The way I was planning to make it work was: When USB HDD connected and laptop powered up, it'll boot to the Oracle Linux. When the USB drive is not connected and laptop powered up, it'll boot to Vista. When I boot with the USB HDD connected, nothing happens. I get a blank screen with a blinking cursor. The USB HDD light comes on though. Is the above plan possible, or do I have to have a Boot loader installed?
If I have to have a boot loader installed, how can I just install the bootloader and not have to reinstall Linux on the HDD. The Linux drive is currently empty, so I'm open to any good suggestions to partitioning it. I want to keep a small amount of NTFS space on that drive to store some windows files and documents that I can carry around. The rest 450 GB is open for Linux. And I Plan to install Oracle Database and Apps on Linux (which takes about 350 GB of space).
