i accidently modified my file system of some partition in my hard disk from ntfs to fat...i havnt formatted the drive...but now i cannot mount this partition...
View 1 RepliesPrior to making a fresh install of 10.04, I made a back up of all my documents by copying them to a NTFS partition. I did this my selecting files in File Browser, then right clicking and selecting the Copy command.
When I came to move the files back after the fresh install, I was mortified to find that all the file modification dates had changed to the date I copied them! I've lost all the original file dates, which was the principal way I sorted my files. I guess there's no way of getting it back? It seems that Linux does not store File Creation dates either so I'm stuffed.
I've surprisely recognized that it's possible to write a filesystem on a hard disk without any valid partition. Well, the general advantages of partitions are clearly. But what are possible disadvantages or limitaions if you don't use a partition (e.g. if you want to use the complete space as one volume for data mining or so)?
View 14 Replies View RelatedSo the first 10Gb of a 450GB NTFS partition have just accidently been written over with an Ext4 filesystem that spans the entire partition instead. all foolishness asside, what can be repaired. Now I know Ext4 likes to jot bits of meta-data down (inodes blocks) along the way, and this can be about 5% of drive capacity, that said, there's alot of small text files and stuff, coe files so forth that can surely be recovered
I've looked into magicrescue and testdisk, but they fall into the only two groups to exist:
1) Filesystem independent, that is search almost like a patern - well exactly like a pattern match, to find the header and footer of files.
2) Filesystem recovery tools, like, damaged bootsector, so forth
I need one, that will be able to extract files, Iunderstand this will be a hard task, but.... text files; surely that'll be easy, anyway. This is my backup drive, they''re both WD you see, anyway. This is important, given the coding is ASCII surely.
can assign permissions on a partition with ntfs as the file system. I am aware of editing fstab and setting some basic permissions. What I am clumsily dictating is can you edit permissions of individual folders for specific users in Linux. I have already tried chmod and such
etc something similar to this
Code:
[user@computername user]$ sudo chmod 600 directory
Someone on IRC had mentioned they had a shared partition in NTFS, and that Ubuntu could read from it just fine... I wanted to get a second opinion before I did anything. Right now I have a WinXP partition and an Ubuntu partition, and a large NTFS partition in the middle that I'd like to move my /home to.
View 7 Replies View RelatedWhen I installed, I accidently installed the bootloader to the mbr of my hard drive instead of the Ubuntu partition.Is there any way that I can make it so that it shows the Windows bootloader first? (Windows partition is set to active, Windows is on hdd0,sda1, Ubuntu is on hdd0,sda4 with sda5 as swap)
View 4 Replies View RelatedI'm dual booting with Windows 7 and would like to have my windows 7 user folder mount when I boot.
After some looking around I edited /etc/fstab to add the following line:
This works. But it mounts the windows partition from the root level. I'd like to just mount C:UsersFHSM (/Users/FSHM) to /mnt/windows.
I'm trying to get it so that when I click on the windows drive I get my windows user folder instead of having to click through from C: to get to it.
I'm the only user on this system but if I created a second windows user would my home folder mount for that person too or does setting the user ID prevent that from happening?
In the Folder /bin I was following along with a tutorial on Linux.org where it was showing me how to edit a file (.bashrc) nad supposedly would not Delte a File without a Warning.The file I would like to put back in the /bin Directory is znew , I am not sure what it does yet but I would like to put it back anyway. Can someone tell me how to redownload that Single File from a Linux Mirror possibly?
View 8 Replies View RelatedI have been running Ubuntu as my sole OS for about a month now, and aside from Computer Janitor, I have found no drive/fs cleaning tools, or defragging tools. I know this isn't Windoze, but surely there must be a way of maintaining your hard disk. I mean installs/uninstalls must leave detritus, and file moving must cause SOME fragmentation. Are there any apps, systems or methods in place that provide this functionality?
View 3 Replies View RelatedWhat file system should I use to partition a slow and old hard drive? I know that ext2 was best for old computers which mine is not but I am using an old hard drive for extra storage and I was curious if anyone knew if using ext2 or ext4 would show any performance differences.
View 4 Replies View RelatedI'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
I really need some help here. I was installing Ubuntu 11.04 supposedly on a Desktop but I had my external hard disk connected via USB. This external hard disk had two NTFS partitions with lots of important personal and my works.
I accidentally installed Ubuntu upon it and I believe I had created new Linux partition for the Ubuntu installation. Is there any way to undo everything?
I need to resize a NTFS partition in a disk for which I have an image (dumped with dd).
I mounted it through the loop device on linux:
# losetup -o 32256 /dev/loop0 disk.img # I got the offset from looking at fdisk's output
# mount /tmp/t /dev/loop0
# ls /tmp/t
[content of NTFS partition shows correctly]
# umount /tmp/t
# gparted /dev/loop0
gparted shows me the disk correctly; it just contains one large NTFS partition I want to shrink.
I have it had it running for one hour now.
Question: will this work? There is lots of disk access but the timestamp and size of the underlying file disk.img remain unchanged.
i have installed Salix 13.1 LXDE version (Salix 13.1 is compatible with Slackware 13.1). I must use various external hard disks formatted with NTFS. The hard disks are automatically recognized and mounted with PCmanFM file manager, but only user root can write on them. How can I allow normal users to write on automounted external ntfs drives?
View 3 Replies View RelatedDoes someone know how to reconfigure this? I have three hard drives.
1. Sata 1TB. It has Windows xp and ubuntu 10.10 on it
2. old 30G drive. It has ubuntu 10.04 on it
3. Old 120G with ubuntu 10.04
I installed the oses on each drive by disconnecting the others. So each drive has a boot record, and I can choose by pressing F11 at boot. All ubuntus can see and mount the NTFS partition except the one I installed last. It's on the 120G drive.
[Code]...
i had installed fedora 14 into my new hardisk(1500gb) as new server the problem is how can i use the fdisk to partition the hardisk into two partition.
View 10 Replies View RelatedJust installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
I clone my entire notebook hdd once a month to a USB drive with an identical disk once a month using dd. I would like to find a way to automatically or manually do incremental backups at shorter intervals.
The first problem is that my incremental backup drive is not the same as my full backup drive (which is my clone). Is there some way to backup or copy all files on a document partition modified after a certain date?
The second problem is that my document partition is NTFS-3G. I guess this could be done pretty easily using "dump" if I stored my docs on ext. [I don't because I want to make sure that my docs are accessible from any machine (say in an Internet cafe) should my MacBook die and I need to rip out the hard drive and run to do my homework on another system; that is why I keep my docs on my Vista partition].
Background for the problem:
A. I have partitioned my WinXP LTop into:
--- WinXP NTFS partition
--- a vfat partition (mounted onto /fat32)
--- Installed F10 on ext3 virtual partition
B. I do not want install grub-loader in the Master Boot Record (that would loose my WinXP boot-loader for ever)
C. I have installed grub boot loader in the First Boot Sector
D. Now I have to boot using Rescue Mode, do:
1. dd if=/dev/sda2 of=/fat32/linux.bin bs=512 count=1
2. mount -t ntfs /dev/sda1 /ntfs
3. cp /fat32/linux.bin /ntfs
4. modify /ntfs/c/boot.ini and introduce the statement 'c:linux.bin="Linux"'
Problem: Im not able to do step D.2 above.
Symptom:
** after booting linux using the Rescue Mode: sh-3.2# chroot /mnt/sysimage sh-3.2# uname -r 2.6.27.5-117.fc10.i586 sh-3.2# mount -f ntfs /dev/sda1 /ntfs FATAL: Could not load /lib/modules/2.6.27.5-117.fc10.i586/modules.dep: No such file or directory ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
sh-3.2#
Observations:
* The rescue mode boots into i586 based kernel (I dont know what is the actual difference between i586 and i686 - will really appreciate if anyone can educate me about it). * The installation is only a i686 image and consequently there is *only* '/lib/modules/2.6.27.5-117.fc10.i686' dir and *no* other dir. There is no dir as xxxx.fc10.i586.
Just ran into an uncomfortable problem. I usually never save any documents on my machine, and keep all my stuff on an external USB hard disk. (an 80GB TrekStor DS microdisk q.u)
Well yesterday this disk just would not mount.
Read through related posts but nothing seemed to work. Even tried it on a Windows machine.
Tried TestDisk utility. Found nothing wrong with the drive, but still could not repair the MBR.log code...
Palimpsest Utility recognized the drive, but just will not let me do anything with it except format it.
How can i repair the partitions and MBR without losing all my data?
I wonder if I can backup files from an ext partition to a ntfs partition and keeping all kind of metadata and file infos?!
With other words:
Can I backup a full linux system from a ext file system to a external ntfs partitioned disk using rsync -a (keeping all file permissions)?
Is something getting lost of a file (like permissions or anything... flags...) when copied / rsynced from ext to ntfs?
The thing is, that when I restore the stuff back from ntfs to ext, can I still use my system properly?
And can I backup files like photos from ext to ntfs without loosing any meta data?
Or asked more in general: What is the difference of a file on a ext partition compared to the same file on a ntfs partition?
How to convert FAT file system to NTFS file system via Ubuntu,are there any commands to do this task?
View 2 Replies View RelatedI was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View RelatedWhen I installed Lucid several months ago, I went ahead and let Ubuntu use the entire disk. Since then I have learned more about partitions and came to realize that I didn't have a separate /home partition, meaning that clean installs of new Ubuntu releases would wipe my data. I would like to carve my hard drive up from the LiveCD environment while preserving my current data and Lucid installation.
View 3 Replies View RelatedHow to create NTFS partition in linux?
View 3 Replies View RelatedWhen i work in Ubuntu on a dual boot system with a shared NTFS data-partition where Windows is hibernated, and then reboot and continue working in Windows from the hibernated sesion, strange things happen. Files disappear, files that i worked on suddenly have the content of another file.
View 5 Replies View RelatedMy computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View RelatedThis is my situation, I had installed Ubuntu in my whole drive in 640Gig. Now, I want to partition it, without affecting my Ubuntu operating system. I just want 320Gig for my Ubuntu and 320 for my Windows.
I know how partition using Windows but from Linux, that I don't know.
I was copying a bunch of files between hard drives. For some reason I have permissions issues, but I was able to copy the data using cp in the terminal (I know I can sort out permissions, but that's something for another thread).So, I start copying files just fine, but cp doesn't have any sort of progress indication. So, I started up another two terminal windows, cd'd to the source and destination folders, and ls -l'd each to compare the folders.
At this point, I realised that I'd forgot to add -r to the cp command, so cancelled it. I decided it'd be better to start again and add -r in, and repeat the command. So, I went to the folder, went up a level, then rm -r'd the folder I was just in. It wasn't until I'd gone through with the command that I realised I was actually in the source folderSo, putting aside all the obvious things like 'You dope, you shouldn't have been messing around with rm -r, let alone sudo' and 'With great power comes great responsibility' and 'This never would have happened if you'd just sorted out your missions and usedNautilus', is there any way I can recover the data? I know it's possible in ext2, but not in ext3, but it's on an NTFS partition. Is it possible to recover files from this