Trying to format a external Hard drive in NTFS using the utility program.
The error message is
"Error creating file system: helper exited with exit code 1: cannot spawn 'mkntfs -f /dev/sdb1': Failed to execute child process "mkntfs" (No such file or directory)"
I have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
View 2 Replies View RelatedI have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
View 4 Replies View Relatedmy external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
View 2 Replies View RelatedWanted to image my mom computer. Her computer is windows 7 and has ntfs. So... how do I mount it?
Below is what I did.
Code:
I just bought a new 320gb laptop hard drive and mounted it into an external enclosure. The hard drive has never been formatted. I plugged it into my computer running Ubuntu 10.10 and nothing happens. I expected something toopup and say the drive has not been formatted and give me formatting choices. I looked in Places>Computer and it's not there. I even looked in Gparted and it does not show it. So how on earth do I format a new external hard drive?
View 9 Replies View RelatedI wanted to get started with Ubuntu so I partitioned an external hard drive with Ubuntu 11.04 onto it. After finding out my computer couldn't but up from a external hard drive I wanted to format my drive. When I plugged it into my computer, Windows would not recognize it. I then dual booted Ubuntu 11.04 onto my laptop and attached my drive. Ubuntu found it a recognized it as 3 separate disks. I then opened up disk utility and told it to format the drive. After clicking a couple "OKs" I got an error message: An error occured while performing an operation on "500 GB Hard Disk" (Seagate FreeAgent GoFlex): The device is busy I clicked details and got:One or more partitions are busy on /dev/sdb. I was wondering what I could do since it isn't doing anything in the first place. I just want to format the whole thing.
View 3 Replies View RelatedI had this corrupted external hdd and so I formatted the main partition on it on windows but messed up in the formatting and ended up having to format the entire thing. I got some weird message about it not being initialized (no not mounted) so I was in compmgmt.msc in windows and right clicked it in device manager and it asked for master boot or GUID I selected the latter and formatted. Worked fine and all for a bit but now it doesn't show up as a drive. I noticed when using compmgmt.msc it showed up that it had installed driver software and was being recognized but in the partition editing area there was nothing on this drive, reinstalling driver software doesn't seem to help. Also GParted wont load up when I have it plugged in and Disk Utility doesn't show it. I am requesting help to fix this problem within Ubuntu 10.10 somehow so I can use it properly.
View 9 Replies View Relatedand am running Ubuntu 9.04 version. My wife's USB flashdisk has picked up viruses from computers running Windows in her office. My quick solution is to format it (and external hard disks as well) in my machine.
View 7 Replies View Relatedcan't find an answer for this here or elsewhere. I recently installed Ubuntu on my laptop with no problems...until now. I bought a Seagate portable drive for backup/extra storage purposes. When I plug in the drive and start up Disk Utility, it recognizes the Drive and whatnot, but when I click "Format Drive" I end up (after clicking through the warnings) with an error message stating:Error Formatting DriveAn error occurred while performing an operation on "640 GB Hard Disk" (Seagate Portable):The device is busyI clicked for details, which resulted in:One or more partitions are busy on /dev/sdb(Not that detailed, if you ask me.)I then entered the command line (a scary place for someone who came over from OSX) Code:sudo lshw -C diskgave me this info about the hard drive I'm trying to format:
Code:
*-disk
description: SCSI Disk
[code]...
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies View RelatedI've been searching for a way to do this with no luck. I've got a 1TB external hard drive I used to share over the network from my Windows desktop -- which is now a Ubuntu desktop.I've tried setting it up as a samba share, and the closest I've gotten is mount error(12): Cannot allocate memory. I've tried the suggestions (editing /etc/security/limits.conf), and that removed the warning I got from testparms but didn't fix the mounting on my mythtv box.
View 1 Replies View RelatedI'm having problems mounting my NTFS external hard drive .
dmseg :
Code:
1.padlock: VIA PadLock Hash Engine not detected.
2.PPP MPPE Compression module registered
3.PPP BSD Compression module registered
4.PPP Deflate Compression module registered
5.npviewer.bin[5405]: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4
6.usb 4-2: new high speed USB device using ehci_hcd and address 5
[code].....
I have a problem in auto mounting external usb hard drive in write mode.
I'm using Debian Etch.
# /etc/fstab: static file system information.
Writing to etrenal USB hard drive doesn't work:
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
View 4 Replies View RelatedI have WD external hdd (80GB) formatted with fat32. I was using this hdd to transfer the data from computer A (LINUX, RH9) to computer B (Win7).
I was keep copying and deleting the data in the WD hdd during the data transfer because the amount to transfer is more than 300GB.
After doing this several times (and the WD drive was emptied), comp. A said the disk is full. I checked using 'df' and it was really full but 'ls -la' shows that there is no data in it.
I checked it in comp. B, and it showed empty. I tried to format in comp. A using 'mkdosfs -F 32 /dev/xxx# (block#)', but showed an error message like below.
'Warning: block count mismatch: found 78xxxxx but assuming 0'.
I found a similar situation in this forum metioning 'possible damaged linux kernel (not exactly same expression though)', so I re-installed linux in comp. A, but the problem was not solved.
1. why the disk info. is showed differently in linux and win7
2. why I cannot format it
I need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedI am working from a laptop where all my work is stored on a 80GB drive. I am now also an owner of an external 250GB USB hard drive, formatted with FAT32. I want to keep it FAT32, so that I can offer some of my files to people that run Mac OS or Windows and I don't want to have them install ext3 for windows and what not.I am in need of a strategy which will allow me to keep a mirror of my laptop drive on my new external drive, i.e. no history / versioning required. However, I do care about file permissions. The files don't have to be stored as-is, they can be stored within a large (80GB?) tar file, that is fine - it would be easier for me to coerce people to open a .tar file than to install an ext3 driver for their OS, I suppose. I don't think I can keep file permissions otherwise, can I?
I have previously used a self-written sh script that used rsync to keep an up-to-date copy of my laptop filesystem on a USB flash drive, but in that case I had the flash drive formatted with ext3, so no problem with file permissions there. This time, it's trickier.
Is it possible to format a Fat32 Ubuntu system drive to ntfs leaving the program and data undisturbed? I created a gparted liveCD and used it to format a slave drive to ntfs. It worked perfectly. Can the gparted liveCD be used on the master drive similarly without destroying the existing files on it?
AMD 1700 2.66ghz, 1gb memory, 80gb HDD plus 60gb HDD, Nvidia TNT2 AGP Video, DVD +/-RW, running Ubuntu Intrepid Ibex 8.10 Standard Desktop installation
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I'm unable to format a new drive. I've tried commands, which complete without error, yet the drive is still listed as NTFS.
===========Ive tried the following
[root@server ~]# mke2fs -j -m1 /dev/sdb1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
[Code]....
I recently tried Fedora on my laptop (previously Debian; I was bored one day) and gnome-disk-utility (palimpsest) warned me that my hard drive had numerous bad sectors. I re-installed Debian to find that this software was installed before so why had it not warned me?
When I load the disk utility, it says SMART is not available. I've got smartmontools installed, I can run a self-test with smartctl but I don't think this shows bad sectors. I've tried starting smartd on startup but the disk utility never changes from "SMART is not available". It is possible for it to work with this hardware as it works in Fedora on this laptop; any ideas?
Right clicking on a drive will format the drive but Disk Utility 2.30.1 included with Ubuntu 10.10 will not format the drive and says the drive is busy.
View 2 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I really need some help here. I was installing Ubuntu 11.04 supposedly on a Desktop but I had my external hard disk connected via USB. This external hard disk had two NTFS partitions with lots of important personal and my works.
I accidentally installed Ubuntu upon it and I believe I had created new Linux partition for the Ubuntu installation. Is there any way to undo everything?
I have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
View 2 Replies View RelatedI just bought an external HDD (WD) which came with ntfs format. Which program can I use to reformat it to ext4? How can I do it?
View 2 Replies View RelatedHow do you format an external harddrive to ext4 or ntfs?
View 5 Replies View Relatedwhat are all the options dos- ect! to format a HD. for the Linux platform is there not a way to load Linux out side of a Windows program .
View 7 Replies View Related
