Ubuntu :: Format A New External Hard Drive?
Dec 18, 2010
I just bought a new 320gb laptop hard drive and mounted it into an external enclosure. The hard drive has never been formatted. I plugged it into my computer running Ubuntu 10.10 and nothing happens. I expected something toopup and say the drive has not been formatted and give me formatting choices. I looked in Places>Computer and it's not there. I even looked in Gparted and it does not show it. So how on earth do I format a new external hard drive?
View 9 Replies
ADVERTISEMENT
Aug 10, 2011
I wanted to get started with Ubuntu so I partitioned an external hard drive with Ubuntu 11.04 onto it. After finding out my computer couldn't but up from a external hard drive I wanted to format my drive. When I plugged it into my computer, Windows would not recognize it. I then dual booted Ubuntu 11.04 onto my laptop and attached my drive. Ubuntu found it a recognized it as 3 separate disks. I then opened up disk utility and told it to format the drive. After clicking a couple "OKs" I got an error message: An error occured while performing an operation on "500 GB Hard Disk" (Seagate FreeAgent GoFlex): The device is busy I clicked details and got:One or more partitions are busy on /dev/sdb. I was wondering what I could do since it isn't doing anything in the first place. I just want to format the whole thing.
View 3 Replies
View Related
Jul 28, 2010
and am running Ubuntu 9.04 version. My wife's USB flashdisk has picked up viruses from computers running Windows in her office. My quick solution is to format it (and external hard disks as well) in my machine.
View 7 Replies
View Related
Oct 12, 2010
can't find an answer for this here or elsewhere. I recently installed Ubuntu on my laptop with no problems...until now. I bought a Seagate portable drive for backup/extra storage purposes. When I plug in the drive and start up Disk Utility, it recognizes the Drive and whatnot, but when I click "Format Drive" I end up (after clicking through the warnings) with an error message stating:Error Formatting DriveAn error occurred while performing an operation on "640 GB Hard Disk" (Seagate Portable):The device is busyI clicked for details, which resulted in:One or more partitions are busy on /dev/sdb(Not that detailed, if you ask me.)I then entered the command line (a scary place for someone who came over from OSX) Code:sudo lshw -C diskgave me this info about the hard drive I'm trying to format:
Code:
*-disk
description: SCSI Disk
[code]...
View 7 Replies
View Related
Nov 4, 2010
I have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
View 2 Replies
View Related
Feb 27, 2010
I have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
View 4 Replies
View Related
Mar 24, 2010
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies
View Related
Mar 21, 2010
Trying to format a external Hard drive in NTFS using the utility program.
The error message is
"Error creating file system: helper exited with exit code 1: cannot spawn 'mkntfs -f /dev/sdb1': Failed to execute child process "mkntfs" (No such file or directory)"
View 4 Replies
View Related
Oct 21, 2010
I have WD external hdd (80GB) formatted with fat32. I was using this hdd to transfer the data from computer A (LINUX, RH9) to computer B (Win7).
I was keep copying and deleting the data in the WD hdd during the data transfer because the amount to transfer is more than 300GB.
After doing this several times (and the WD drive was emptied), comp. A said the disk is full. I checked using 'df' and it was really full but 'ls -la' shows that there is no data in it.
I checked it in comp. B, and it showed empty. I tried to format in comp. A using 'mkdosfs -F 32 /dev/xxx# (block#)', but showed an error message like below.
'Warning: block count mismatch: found 78xxxxx but assuming 0'.
I found a similar situation in this forum metioning 'possible damaged linux kernel (not exactly same expression though)', so I re-installed linux in comp. A, but the problem was not solved.
1. why the disk info. is showed differently in linux and win7
2. why I cannot format it
View 3 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Sep 15, 2010
I need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
View 6 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Oct 3, 2009
I need to know how and what to use to format a USB external Hard disk with linux as i dont want anything that can be read with windows.
View 1 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Mar 10, 2010
I would like to format my new external hard drive (1.5TB) so it can be accessed on both Linux (Ubuntu) and OSX. Is that possible without using FAT system? If yes, what file system should I use?
View 7 Replies
View Related
Jan 9, 2010
I put a larger drive in my netbook and stuck the old in an external USB enclosure so I could use it for backups. It had three partitions on it, ntfs and linux so I deleted all the partitions and created one big linux partition. Every time I write and exit fdisk the removable disk utility in KDE pops up and says ntfs drive. If I ignore it and try to formatit wants to use ntfs, if I fsck.ext3 it saysThe superblock could not be read or does not describe a correct ext2filesystem. If the deviceis valid and it really contains an ext2filesystem (and not swap or ufs or something else), then the superblockis corrupt, and you might try running e2fsck with an alternate superblock:e2fsck -b 8193 <device>2fsck -b 8193 doesn't work either.It seems like its caching something, I can print the partition table and see the one linux partition I created.
Code:
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]...
View 3 Replies
View Related
Nov 10, 2014
i have external hard drive which will be used for windows and i have to format it. i tried with disk utility program but it tells me all the time device is busy. in terminal its too complicated for me.
View 2 Replies
View Related
Sep 18, 2010
I have an external 500GB USB drive that I want to sell. I've copied some stuff to it and practiced partitioning and formatting with it, but I want to use something to erase it completely. Is this possible if the USB is connected to a ThinkCentre 8187-EJU with an Ubuntu 10.04 OS? I've used Dban to erase regular hard disks but don't any software that could be installed on my computer that would erase a USB drive.
View 5 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
May 30, 2010
I'm not sure what to do, but I just rescued photos and documents using ubuntu live cd, gddrescue and photorec. The data carving went fine and I was able to move all of my recovered jpg's into a recovery/jpg folder, as well as my word doc's into a recover/doc folder. I also have recovery/video and recovery/audio. Now here's my problem...
I used the right-click "safely remove drive" from the ubuntu interface and then unplugged my external drive. I then tried to view the recovered photos, etc on my windows 7 desktop, but when I plug in the external drive I get an error and a prompt to "format the drive" so that windows can use it.
I plugged the external drive back into my failed laptop and with the ubuntu live cd can see the drive, but none of the folders display. I can cd "change directories" to all of the folders using a terminal, but still can't see them outside of the terminal. That is, with the ubuntu interface. I'm just trying to finish up recoverying these photos, which I thought I had done.
View 4 Replies
View Related
May 14, 2010
I have an 80gb hard drive that I used in an xbox for xbmc and it was formatted to whatever it needed to be formatted to for it. Now that I want to use it in my computer, I can't format it back to ext4 or NTFS. It's somewhat recognized, but the partition shows up as unknown. Is there a program that I can get to reformat it? idk if gparted will work cuz it won't startup on the live CD. I will give it a shot once I install ubuntu onto the computer.
View 9 Replies
View Related
Nov 23, 2010
I was looking in the disk utility today, and i was looking in the hard drive formatting section. in the drop down box, i noticed Apple. does that mean that i could format the rest of my hard drive to be OSX compliant?
View 3 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Jun 30, 2011
I have a 2TB Seagate GoFlex Desk External HDD. I want to format it. Which is the best disk format, which will be supported in all OS, like Windows, Linux and Mac?
View 2 Replies
View Related
Jan 28, 2010
I've currently got 9.10 and have (somehow) managed to mess the system up already!It's a new computer so I'm not fussed about data loss etc, but is there a way to completely reset the system which will also format the hard drive (as it was a download that has messed it up!) without losing the O/S?
View 9 Replies
View Related
Jun 23, 2010
An upgrade %100 pwnd my system: I performed an upgrade to Lucid from Karmic and I lost my keyboard input and sound etc etc etc. I then made a Karmic boot-run/install CD, & a USB startup stick. I then backed up my important information on flashdrives etc. At this point in time I have 2 partitions one with my old user account & info on it, and the other as a new (re)installed Karmic partition. My question is: What is the procedure for:
a) formatting the drive,
b) not keeping the 2 partitions, and
c) re-installing Ubuntu (karmic) back onto it?
I have GParted ( but I can't see how to use it to format ), and I have no clue how to format the Drive from either within the GUI or at the command-line. How do I format & re-install Ubuntu? What is the sequence or steps? I can probably do the re-install intuitively but I'm concerned there may be Ubuntu tricks I don't know about! Also- does this 2 partition thing cause any complications to formatting?? So honestly my question is simply how to format the drive from within the system.
View 6 Replies
View Related
Aug 29, 2010
I have a PC with really low specs ( it's a back up computer) that's running puppy linux but I don't really like it. It's hard to navigate/get things you could easily do on Windows Xp done, it's menus are crowded and well it can't even shut off properly which is a shame. I've had it on for only a week.
Anyways, I've downnloaded the Xubuntu . Iso and burnt it at 1x speed. I pop it in and it does take a long time to go through the install. ( I'm not sure if it's because of the disc read speed or because of the memory and what not) I chose the option to delete everything and install Xubuntu. It works and then I get a couple of error message and then the last one says something like " Can not format sda1" or something like that.
View 4 Replies
View Related
Sep 8, 2010
Below is results from attempt at formatting my hard drive. As you can see a driver is installed, but not working. Perhaps something is missing? Seems a bit odd that a "unable to read" comes back when disk data is reported. The drive just went through a low level format. BTW this is a fiber channel drive. Also on board are 5 scsi drives. Adaptec raid card. Not sure if that would have any relevance, but there you are.
barry@vm1:~$ sudo lshw -C disk
*-disk
description: SCSI Disk
product: ST173404 CLAR72
vendor: SEAGATE
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 3A98
serial: 3CE0SRYL00007142FHAW
capacity: 67GiB (72GB)
capabilities: 10000rpm
configuration: ansiversion=3
barry@vm1:~$ sudo fdisk /dev/sdb
Unable to read /dev/sdb .....
View 4 Replies
View Related
