My Red Hat EL 5.5 64 bit edition, I've install it on my primary hard drive 12 GB it works fine and then I added secondary 20 GB hard drive (sdb1) into this system and then format it as VolGroup01 see the attachment, but how come it doesn't show up ?
Code:
I am working on a computer that the hard drive crashed. Inititially they had a virus, reloaded windows, and had the computer up and running. When downloading software it crashed and will not boot. I have tried all the numerous routine fixes with no success including using the repair discs. The repair discs no longer work and they are unable to get a second set. As a last resort I am able to access the hard drive when booting from Knoppix from a CD. There are a couple things I would like to try from Knoppix, but do not know if it is possible. First, Is it possible to load the boot files from knoppix? Second, can you roll back the drivers from knoppix?
View 1 Replies View RelatedHaving just moved to Linux from Windows, I have never considered whether or not to partition my 250 GB external hard drive. As of right now it will only be used for data storage. Should it be partitioned? If so, what size partitions?
View 7 Replies View RelatedI have windows xp on my first hard drive and Linux on the second hard drive.The windows hard drive is labeled hda1 and the linux hard drive is labeled hdb1.I am using GRUB to boot the linux hard drive and it is installed on hdb.Is there any way to boot the secondary linux hard drive using the windows bootloader?I have tried several online tutorials for it but none of them work.
View 5 Replies View RelatedI need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
I have a Linux application(ProMAX 5000) running in a virtual Machine on my windows OS. I am using an external Hard drive of 250G in ext2 file system as my device for large data read, write & execute file system. I have already mounted the device from /etc/fstab. But i want my application to access this device as a Primary data storage device OR Secondary storage device. What command will i invoke to partition this 250G drive as my primary or secondary storage device.
View 1 Replies View RelatedI have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
View 2 Replies View RelatedI added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies View RelatedI have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
View 4 Replies View RelatedI am running Ubuntu Server and I recently added a new hard drive to the mix. Not replacing the old one, but adding a second one.What I want to know is how to I access that hard drive? I know in the desktop version it auto adds it, but not in the server version I checked my media folder.I installed it to be my new Samba share hard drive. So how to I get at it to use it?
View 2 Replies View RelatedI am hosting some VPS, and I am wondering the best way to copy the VPS data to a secondary hard drive mounted on /backup on a daily basis.
View 5 Replies View Relatedhow do i format a hard drive in order to install linux,The following errors are displayed during installation:"VolGroup01" not found followed by could not find filesystem '/dev/root
View 2 Replies View RelatedI have two hard drives in my computer, one for the operating system and the other solely for storage. They both have ext4 filesystems. Is there any way that i can have my storage hard drive to automatically mount on start up?
View 9 Replies View RelatedI've read the official documentation regarding hard drives and partitions. My pc has two hard drives. a 160gb primary hard drive with windows 7 a 1.5 tb secondary hard drive with about 80gb of free space I would like to know whether I can install ubuntu on the secondary hard drive, without touching any of the data present on that drive. From my limited understanding of storage, files are written all over hard drives during copy, move etc... Is the ubuntu partition manager smart enough not to overwrite any files during installation? Will I get a warning if there is a risk of any data loss on the secondary hard drive? I cannot backup any of the data on the secondary hard drive due to all my external drives currently being full.
View 9 Replies View Relatedhard drive formatting, compatibility with Macs, and Windows Etc, suggestions? GUID APM or what else? can I format a hard drive on a linux system that will be compatible witha Mac?
View 3 Replies View RelatedTrying to format a external Hard drive in NTFS using the utility program.
The error message is
"Error creating file system: helper exited with exit code 1: cannot spawn 'mkntfs -f /dev/sdb1': Failed to execute child process "mkntfs" (No such file or directory)"
I have an 80gb hard drive that I used in an xbox for xbmc and it was formatted to whatever it needed to be formatted to for it. Now that I want to use it in my computer, I can't format it back to ext4 or NTFS. It's somewhat recognized, but the partition shows up as unknown. Is there a program that I can get to reformat it? idk if gparted will work cuz it won't startup on the live CD. I will give it a shot once I install ubuntu onto the computer.
View 9 Replies View RelatedI was looking in the disk utility today, and i was looking in the hard drive formatting section. in the drop down box, i noticed Apple. does that mean that i could format the rest of my hard drive to be OSX compliant?
View 3 Replies View RelatedI just bought a new 320gb laptop hard drive and mounted it into an external enclosure. The hard drive has never been formatted. I plugged it into my computer running Ubuntu 10.10 and nothing happens. I expected something toopup and say the drive has not been formatted and give me formatting choices. I looked in Places>Computer and it's not there. I even looked in Gparted and it does not show it. So how on earth do I format a new external hard drive?
View 9 Replies View RelatedI wanted to get started with Ubuntu so I partitioned an external hard drive with Ubuntu 11.04 onto it. After finding out my computer couldn't but up from a external hard drive I wanted to format my drive. When I plugged it into my computer, Windows would not recognize it. I then dual booted Ubuntu 11.04 onto my laptop and attached my drive. Ubuntu found it a recognized it as 3 separate disks. I then opened up disk utility and told it to format the drive. After clicking a couple "OKs" I got an error message: An error occured while performing an operation on "500 GB Hard Disk" (Seagate FreeAgent GoFlex): The device is busy I clicked details and got:One or more partitions are busy on /dev/sdb. I was wondering what I could do since it isn't doing anything in the first place. I just want to format the whole thing.
View 3 Replies View RelatedI just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies View RelatedI've currently got 9.10 and have (somehow) managed to mess the system up already!It's a new computer so I'm not fussed about data loss etc, but is there a way to completely reset the system which will also format the hard drive (as it was a download that has messed it up!) without losing the O/S?
View 9 Replies View RelatedAn upgrade %100 pwnd my system: I performed an upgrade to Lucid from Karmic and I lost my keyboard input and sound etc etc etc. I then made a Karmic boot-run/install CD, & a USB startup stick. I then backed up my important information on flashdrives etc. At this point in time I have 2 partitions one with my old user account & info on it, and the other as a new (re)installed Karmic partition. My question is: What is the procedure for:
a) formatting the drive,
b) not keeping the 2 partitions, and
c) re-installing Ubuntu (karmic) back onto it?
I have GParted ( but I can't see how to use it to format ), and I have no clue how to format the Drive from either within the GUI or at the command-line. How do I format & re-install Ubuntu? What is the sequence or steps? I can probably do the re-install intuitively but I'm concerned there may be Ubuntu tricks I don't know about! Also- does this 2 partition thing cause any complications to formatting?? So honestly my question is simply how to format the drive from within the system.
and am running Ubuntu 9.04 version. My wife's USB flashdisk has picked up viruses from computers running Windows in her office. My quick solution is to format it (and external hard disks as well) in my machine.
View 7 Replies View RelatedI have a PC with really low specs ( it's a back up computer) that's running puppy linux but I don't really like it. It's hard to navigate/get things you could easily do on Windows Xp done, it's menus are crowded and well it can't even shut off properly which is a shame. I've had it on for only a week.
Anyways, I've downnloaded the Xubuntu . Iso and burnt it at 1x speed. I pop it in and it does take a long time to go through the install. ( I'm not sure if it's because of the disc read speed or because of the memory and what not) I chose the option to delete everything and install Xubuntu. It works and then I get a couple of error message and then the last one says something like " Can not format sda1" or something like that.
Below is results from attempt at formatting my hard drive. As you can see a driver is installed, but not working. Perhaps something is missing? Seems a bit odd that a "unable to read" comes back when disk data is reported. The drive just went through a low level format. BTW this is a fiber channel drive. Also on board are 5 scsi drives. Adaptec raid card. Not sure if that would have any relevance, but there you are.
barry@vm1:~$ sudo lshw -C disk
*-disk
description: SCSI Disk
product: ST173404 CLAR72
vendor: SEAGATE
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 3A98
serial: 3CE0SRYL00007142FHAW
capacity: 67GiB (72GB)
capabilities: 10000rpm
configuration: ansiversion=3
barry@vm1:~$ sudo fdisk /dev/sdb
Unable to read /dev/sdb .....
can't find an answer for this here or elsewhere. I recently installed Ubuntu on my laptop with no problems...until now. I bought a Seagate portable drive for backup/extra storage purposes. When I plug in the drive and start up Disk Utility, it recognizes the Drive and whatnot, but when I click "Format Drive" I end up (after clicking through the warnings) with an error message stating:Error Formatting DriveAn error occurred while performing an operation on "640 GB Hard Disk" (Seagate Portable):The device is busyI clicked for details, which resulted in:One or more partitions are busy on /dev/sdb(Not that detailed, if you ask me.)I then entered the command line (a scary place for someone who came over from OSX) Code:sudo lshw -C diskgave me this info about the hard drive I'm trying to format:
Code:
*-disk
description: SCSI Disk
[code]...
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies View RelatedI am new to debian and recently I have been working with a debian server. I have been asked to find out how to create a script that you can run or can be run by another program to format and mount a new hard disk?
View 3 Replies View RelatedI am currently using Lucid Lynx and when I open Nautilus, the drives are labelled as follows:
200 GB Hard Diskrive Label
How can I get rid of the the 200 GB Hard Disk bit