General :: Home Server Software And Setup - OS On USB Stick?
Mar 19, 2011
I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran fine. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.
What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they
have a static IP have a domain name are always connected to the same network
My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.
I've decided to try and setup a simple home server with Debian. I can either install the OS on a compact flash card and use hard disks as storage, or just install everything on the hard disk. I'd also like to set up a software raid for mirroring. I've never done this before, and most recently updated documentation i've found is for ubuntu. Any advice or good links someone can point me to on how to set up raid? I'd like to encrypt my hard disks but I don't know what my options are. It seems like people point to truecrypt, but i'm wondering what else is out there or if people have any advice on this. Would it be feasible to do this if I install the OS on a compact flash card and?
It it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
I'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.
Is it possible to do this with no router and only a DSL ISP connection?
I want to try and set up a server on a home PC, using Debian of course, rather than on a remote server. hosting web pages, a mail server and a file server etc. Installation looks fairly straightforward. However, there are one or two things that are not too clear to me:
A. Is it best to connect the server using Ethernet or is wireless OK with network manager or wicd or doesn't it matter? Answer: Wired ethernet is best
B. if the IP of my desktop Debian (wireless) has the same IP as the server, how do I connect from my desktop? The router has its own static IP address but assigns two different IP addresses, one to the desktop computer and the other to the PC being used as a server.
C. I have a static IP and a domain.com without hosting but it's status is "parked". Not too sure what this implies. [When domain is "parked" it means it is still hosted by the company that registered it. So it's necessary to "unpark" it.] It was very easy to unpark the domain as explained in a reply post below.
D. setting up DNS with the static IP? [Answer: in the case of the company i registered with, I didn't have to set up any DNS because the domain works with the company name servers, so it was much less complicated than i imagined.]
E. I seem to have only ONE Primary DNS for my connection.
F. it's better on a server to have no Desktop. It looks easy enough to install but, accustomed though I am to the CLI. configuring without cut and paste is very tedious.Can anyone suggest a way round this? I've thought of trying to use the lynx browser and nano. [Answer: Best to install the server without a Desktop. For editing files I used PuTTy, which enables me to cut and paste and nano having found vi pretty unfriendly. One day i'll get round to using vi or vim which may be more than a blast from the past! Once the thing is fully set up it would be nice to connect to the server from the first desktop computer using GUI tools.
I am looking for guides and tutorials on stetting up Ubuntu as a home server. Not so much web server oriented, but more for video/music streaming, torrent download, backups, VPN, remote desktop, etc.
I'm trying to setup a pseudo home server. Basically I just want to be able to log into my machine from work. The problem is that I have a dynamic IP address.My question is probably obvious, but bare with me: I know that you can login to a computer by its name (ie. ssh ApacheRoseXBones@HomeStation.stuff). What does one need to do to be able to log into their machine like this?
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf zone "net.local" in { type master; file "/etc/bind/net.local.ns"; allow-update { none; };
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
1.User login/authentication via a single NIS server. 2. User home directory should also be on the Same NIS server. 3. If possible to setup a single shared home directory for all users.
OpenSuse version 11.2 There are twelve workstations from which users will login using the NIS authentication. I have succeeded in setting up NI server. However login fails as the home directory is not accessible.
I'd like to set up my home network with an Ubuntu file/internet server. In addition, I would use this server to monitor internet traffic. What hardware/software would be required?
My current network is as follows:
Laptop 1 Ubuntu 9.1 Laptop 2 Vista Laptop 3 XP Desktop Ubuntu 9.04 (would be used as server)
All connected thru linksys wireless router to cable modem.
I want to try and set up a old cheap computer with ubuntu and run it as a home server to toy around with. how to get started? (Where to get an old computer? Craigslist? What specs should I be looking out for? Wireless vs. ethernet? What software to use? ssh?)
I am trying to setup samba to allow file sharing to: /home/kris & /var/www
I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"
Here is my conf file:
Code: [global] workgroup = homegroup ;put your own workgroup name here netbios name = intranet ; this should be your own too server string = Intranet in Kris' Room. ; hosts allow = 192.168.1
I'm testing a Debian Lenny virtual machine to simulate my ideal setup for FTP server (with vsftpd): I want all internal users (corporation users with Active Directory accounts) to ftp into the same directory (i.e. /var/FTP/AD-DOMAIN/) and external users (customers) to ftp into their home directories (created manually on request).
I added user_config_dir=/etc/vsftpd_user_conf option in /etc/vsftpd.conf file and I've created /etc/vsftpd_user_conf/domain-user1 with local_root=/var/FTP/AD-DOMAIN
I have setup vsftp so I can ftp with every external and internal user chrooted and is working properly. AD validation for internal users and "normal" validation (via /etc/passwd) for external users work perfect.
I can FTP this server into /var/FTP/AD-DOMAIN with any AD user with its home directory created (i.e. /home/AD-DOMAIN/domain-user1/) but if I try to ftp with any AD user without its home directory created I get the error "500 OOPS: cannot change directory:/home/AD-DOMAIN/domain-user2"
I have found some references (http://wiki.flexion.org/FtpServer.html and http://howto.gumph.org/content/setup...ies-in-vsftpd/) about vsftp PAM authentication so I would supposedly get rid of the error message and the user would log into /var/FTP/AD-DOMAIN without problems, but I can't figure out how to setup my FTP server.
I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
I would like to setup a qmail server for learning purposes (if you strongly feel Postfix is better, feel free to let me know). When I started setting up qmail (using Life with qmail), it suggested that having a DNS is the best approach. In the spirit of learning, I decided then to create another server for DNS only, and use that for qmail.
My problem is that, as this is a home installation, the internet is behind a Netgear DG834Gv5 router, on a DSL line that has a dynamic IP address. I am using DynDNS, but also don't mind having to update any DNS entries to keep up with the change, this is not exactly a production-grade setup.
In addition, I also have access to another DNS server where I can create authoritive entries for any domain I register. I have done that for a domain, and would like to point part of that to my home DNS so that I can learn.
So essentially, I would like to have a new zone for home.mydomain.org on my home DNS so that I can create new entries for *.home.mydomain.org such as qmail.home.mydomain.org etc. there.
I assume that this would include port forwarding on the router which is not a problem, but I truly have no clue where to start. I have a very basic install of Cent-OS 5.3 (no X and just Base a few admin and dev tools) and just installed the latest RPM of bind (9.3.x).
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
I'm looking to setup a home server for the purpose of backing up and storing the files on our multiple (Windows) computers. What kind of server should I set up? Samba? Lamp?
I've been wanting to have the ability to ssh into my Win 7 home machine from my laptop, from anywhere and I'm not sure how to do this. Can someone give me some advice or point me to an article that could show me how to do this? Also, would this affect the security of my home machine (sometimes I do banking there)? The home machine has windows 7 Home X64 bit OS under a Linksys router. The laptop is running Ubuntu Lucid.
I have set up Debian 'Lenny' on my machine at home. I work in the computer industry but I am not soo techie so I want to find the best way to learn Linux from scratch.
What would be the best source of documents to find what is available in Lenny eg. software and how to install them, how to configure package manager, configure wireless adapters, use UNIX commands for linux and install Apache, MySQL and PHP?
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
How to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
