How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
View 2 Replieswhat is the best way to synchronize files with ftp server
and I wnat to do this automaticlly
I am trying to synchronize the time of my VM server with ntpd. I have the following configuration. And in the /etc/ntp.conf, I have the following line:
restrict default ignore
restrict 127.0.0.1.
server time1.server
server time2.server
Whenever I have this line, the erver is not able to synchronize its time... So far as I understood, this line prevents other servers using this machine as a time server. And the second line says to allow localhost to use as time server. But why do I need to use its own time server when I have specified to use time1.server and time2.server ? ( firewall for tcp and udp ports 123 is open)
However, when I replace the first line of the configuration with the following line, it works. restrict default kod nomodify notrap noquery But with this, i am allowing other servers to use this server a ntp (which I wouldn't like to). Why this machine tries to use ntp server of its own (to snyc time) and why it is not working though i have the entry "restrict 127.0.0.1" ??
How will configure ntpd server? I tried to do it but I am used to get synchronize failed error.
View 2 Replies View Relatedhow to setup shoutcast to automatically start when i start my server?
i have installed it on /root/shoutcast ; configuration file /root/shoutcast/shoutcast_config
I am trying to setup a ventrilo server. I want it to load the server automatically on system boot so it is running at all times. I have downloaded the server files and can manually start it, but I do not know where/how to make it start automatically.
View 1 Replies View RelatedI my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
How to setup a SMS server using Linux, also want to know the appropriate Linux distribution to setup a SMS server.
View 2 Replies View RelatedHow to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
View 1 Replies View Relatedhow i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedI am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
I'm trying to synchronize a client with an ntpdate server. The ntp.conf file from the server has the following lines: # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
[Code]...
I have installed the synckolab add-on in thunderbird to synchronize with my citadel server. The calendar and tasks in te server are synchronized to my client, but not the other way round, i.e. the changes in thunderbird are not written to citadel. Contacts get synchronized ok, in both directions.
Setup is:
Has anybody on this list set up a working synchronization of calendar and task items with synckolab?
I'll try to describe my question as clear as possible.
- I have purchased a domain name : *****.md
- In the panel of registrar I have only the following options to complete :
Primary NS Hostname
Primary NS Netaddress
Secondary NS Hostname
Secondary NS Netaddress
- At home I have :
a)a WiFi router that is getting an external IP from my ISP provider (internal address of router is 192.168.1.111); External IP from ISP is STATIC.
b)a computer which I use as server (ubuntu 10) with internal IP 192.168.1.100 (I get it by DHCP from Router but it can be set as static of course);
- On server are installed :
a) Apache + Mysql + PHP
b) Ftp serv
c) Webmin
d) SSH serv
e) Bind9 DNS serv
- On my WiFi router there is an option "Forwarding -> Virtual servers" where I setup the ports 53 + 80 to forward to my server and I can access from external my site by IP.
All I want is to have my site *****.md to run on my server and to be visible to external world.
I have searched Google for last 2-3 days for a solution but everything I try doesn't help.
I'm new in Linux ( 1 week probably). Everything except DNS server Bind I was able to setup and are working well.
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedWe are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I would like to set disclaimer like content in my meral mail server, so that all the users should be able to get that content automatically in their outgoing mails.
View 3 Replies View RelatedI have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedMy RHEL Machine is a Build server and always gets shutdown / rebooted at around 5:30 every evening. No idea whats going on as developers were unable to connect to the machine since three days. When I am visiting the physical server probably next morning (since last 3 days)its doesn't show anything and all i reboot the machine and it comes up without any issue. how to troubleshoot?
View 7 Replies View RelatedI'm wondering how I start it automatically when I boot up the ubuntu 10.04? especially, when I created the user "postgres", I set a password to it. every time I issued "su - postgres" command, I need to give it a password.
View 2 Replies View Relatedsome times network disconnected automatically. if we restart rhe server it automatically starts to work. again 2 or 3 days, the same senario is happening. on this server 2 database is running, it makes lot of problem to us. what will be the problem? is any connection parameter is there? (ie i mean only 50 numbers of client connection is only allowed like.) or any problem in NIC card or NIC driver.
View 4 Replies View RelatedI wrote a Perl script which will serve as a daemon, so I'd like to let the OS (in my case, Ubuntu Linux) automatically run my Perl script after it has booted up.
How can I do that?
I am running a dedicated server with linux cent os 5.5 32 bit with lighttpd, php 5.2.14 and mysql
I am getting problem in my server. The filesystem enters read only mode automatically and then I can't edit any file in my server. This happens by itself. I tried to run fsck command and it gives the following output:
Code:
[root@server]# fsck -A -y
fsck 1.39 (29-May-2006)
e2fsck 1.39 (29-May-2006)
/: recovering journal
Clearing orphaned inode 11108656 (uid=0, gid=0, mode=0140777, size=0)
Clearing orphaned inode 13631499 (uid=27, gid=27, mode=0100600, size=0)
[Code]....
Linux Server automatically reboots when i plug in the network cable.it was working fine till 2 days back and no changes were made to it.any light on this note pls? kindly confirm if any logs are required for the discussion!
View 1 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedIf you hadn't guessed it from my last 3000(ish) java-related posts, I'm a Java n00b writing a Java Applet for a work project. I got to the part was I was about to write the applet code that would send HTTP requests to my CGI scripts. But I read some paragraphs in a book praising Java servlets as better that CGI because they are easier to use and give much better performance server side. My server load isn't very big, though, and I was wondering if it would be worth taking the time to learn about Java servlets and how to set up the server side configuration on my Fedora web server.
View 3 Replies View RelatedI have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
I want to set up moodle and need to give my computer some capability to act as a server. I am following the steps at [URL] although my question is not really related to moodle. Here is the problem: setting everything up to make my computer accessible from outside has worked so far. I got myself a static IP address using a dynamic dns server and can ssh into my computer from any other computer connected to the www. So,
[Code]....
I need to setup a Linux VPN server at work for resources' sharing, I currently have a server running CentOS 5.4, and tried endless tutorials on the web, but to no avail, and can't find where the logs are kept for the VPN server to check where the error is. But all my attempts to try to connect keep failing.
View 9 Replies View Related