I'm trying to setup a pseudo home server. Basically I just want to be able to log into my machine from work. The problem is that I have a dynamic IP address.My question is probably obvious, but bare with me: I know that you can login to a computer by its name (ie. ssh ApacheRoseXBones@HomeStation.stuff). What does one need to do to be able to log into their machine like this?
View 5 RepliesI'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.
Is it possible to do this with no router and only a DSL ISP connection?
I use mpssh or pssh to issue commands to multiple servers. Problem is that some of the commands require pseudo terminal and won't work with these tools. This will work just fine: "ssh -t user@server command" as stated under SSH man: -t = Force pseudo-tty allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g., when implementing menu services.
Multiple -t options force tty allocation, even if ssh has no local tty. So, is there a workaround for the above tools? Or is there any other tool for multi server administration that will work? If you are not sure what I am talking about just try executing "ssh user@server top" and "ssh -t user@server top" to know exactly the difference.
I want to try and set up a server on a home PC, using Debian of course, rather than on a remote server. hosting web pages, a mail server and a file server etc. Installation looks fairly straightforward. However, there are one or two things that are not too clear to me:
A. Is it best to connect the server using Ethernet or is wireless OK with network manager or wicd or doesn't it matter? Answer: Wired ethernet is best
B. if the IP of my desktop Debian (wireless) has the same IP as the server, how do I connect from my desktop? The router has its own static IP address but assigns two different IP addresses, one to the desktop computer and the other to the PC being used as a server.
C. I have a static IP and a domain.com without hosting but it's status is "parked". Not too sure what this implies. [When domain is "parked" it means it is still hosted by the company that registered it. So it's necessary to "unpark" it.] It was very easy to unpark the domain as explained in a reply post below.
D. setting up DNS with the static IP? [Answer: in the case of the company i registered with, I didn't have to set up any DNS because the domain works with the company name servers, so it was much less complicated than i imagined.]
E. I seem to have only ONE Primary DNS for my connection.
F. it's better on a server to have no Desktop. It looks easy enough to install but, accustomed though I am to the CLI. configuring without cut and paste is very tedious.Can anyone suggest a way round this? I've thought of trying to use the lynx browser and nano. [Answer: Best to install the server without a Desktop. For editing files I used PuTTy, which enables me to cut and paste and nano having found vi pretty unfriendly. One day i'll get round to using vi or vim which may be more than a blast from the past! Once the thing is fully set up it would be nice to connect to the server from the first desktop computer using GUI tools.
Setup VPN from home to Ubuntu server 8.04
View 1 Replies View RelatedI am looking for guides and tutorials on stetting up Ubuntu as a home server. Not so much web server oriented, but more for video/music streaming, torrent download, backups, VPN, remote desktop, etc.
View 3 Replies View RelatedWhat is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they
have a static IP
have a domain name
are always connected to the same network
My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.
I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran fine. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.
View 2 Replies View RelatedI've decided to try and setup a simple home server with Debian. I can either install the OS on a compact flash card and use hard disks as storage, or just install everything on the hard disk. I'd also like to set up a software raid for mirroring. I've never done this before, and most recently updated documentation i've found is for ubuntu. Any advice or good links someone can point me to on how to set up raid? I'd like to encrypt my hard disks but I don't know what my options are. It seems like people point to truecrypt, but i'm wondering what else is out there or if people have any advice on this. Would it be feasible to do this if I install the OS on a compact flash card and?
View 3 Replies View RelatedIt it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies View RelatedI am attempting to setup the following:
1.User login/authentication via a single NIS server.
2. User home directory should also be on the Same NIS server.
3. If possible to setup a single shared home directory for all users.
OpenSuse version 11.2 There are twelve workstations from which users will login using the NIS authentication. I have succeeded in setting up NI server. However login fails as the home directory is not accessible.
I'd like to set up my home network with an Ubuntu file/internet server. In addition, I would use this server to monitor internet traffic. What hardware/software would be required?
My current network is as follows:
Laptop 1 Ubuntu 9.1
Laptop 2 Vista
Laptop 3 XP
Desktop Ubuntu 9.04 (would be used as server)
All connected thru linksys wireless router to cable modem.
I want to try and set up a old cheap computer with ubuntu and run it as a home server to toy around with. how to get started? (Where to get an old computer? Craigslist? What specs should I be looking out for? Wireless vs. ethernet? What software to use? ssh?)
View 2 Replies View RelatedI am trying to setup samba to allow file sharing to: /home/kris & /var/www
I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"
Here is my conf file:
Code:
[global]
workgroup = homegroup ;put your own workgroup name here
netbios name = intranet ; this should be your own too
server string = Intranet in Kris' Room.
; hosts allow = 192.168.1
[Code].....
I'm testing a Debian Lenny virtual machine to simulate my ideal setup for FTP server (with vsftpd): I want all internal users (corporation users with Active Directory accounts) to ftp into the same directory (i.e. /var/FTP/AD-DOMAIN/) and external users (customers) to ftp into their home directories (created manually on request).
I added user_config_dir=/etc/vsftpd_user_conf option in /etc/vsftpd.conf file and I've created /etc/vsftpd_user_conf/domain-user1 with local_root=/var/FTP/AD-DOMAIN
I have setup vsftp so I can ftp with every external and internal user chrooted and is working properly. AD validation for internal users and "normal" validation (via /etc/passwd) for external users work perfect.
I can FTP this server into /var/FTP/AD-DOMAIN with any AD user with its home directory created (i.e. /home/AD-DOMAIN/domain-user1/) but if I try to ftp with any AD user without its home directory created I get the error "500 OOPS: cannot change directory:/home/AD-DOMAIN/domain-user2"
I have found some references (http://wiki.flexion.org/FtpServer.html and http://howto.gumph.org/content/setup...ies-in-vsftpd/) about vsftp PAM authentication so I would supposedly get rid of the error message and the user would log into /var/FTP/AD-DOMAIN without problems, but I can't figure out how to setup my FTP server.
I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
Code:
pph-server:~ # zypper up
Loading repository data...
Reading installed packages...
[Code]....
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
I would like to setup a qmail server for learning purposes (if you strongly feel Postfix is better, feel free to let me know). When I started setting up qmail (using Life with qmail), it suggested that having a DNS is the best approach. In the spirit of learning, I decided then to create another server for DNS only, and use that for qmail.
My problem is that, as this is a home installation, the internet is behind a Netgear DG834Gv5 router, on a DSL line that has a dynamic IP address. I am using DynDNS, but also don't mind having to update any DNS entries to keep up with the change, this is not exactly a production-grade setup.
In addition, I also have access to another DNS server where I can create authoritive entries for any domain I register. I have done that for a domain, and would like to point part of that to my home DNS so that I can learn.
So essentially, I would like to have a new zone for home.mydomain.org on my home DNS so that I can create new entries for *.home.mydomain.org such as qmail.home.mydomain.org etc. there.
I assume that this would include port forwarding on the router which is not a problem, but I truly have no clue where to start. I have a very basic install of Cent-OS 5.3 (no X and just Base a few admin and dev tools) and just installed the latest RPM of bind (9.3.x).
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
I'm looking to setup a home server for the purpose of backing up and storing the files on our multiple (Windows) computers. What kind of server should I set up? Samba? Lamp?
View 5 Replies View Relatedi recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public
View 2 Replies View RelatedI'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedWe are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
View 1 Replies View RelatedHow to setup a SMS server using Linux, also want to know the appropriate Linux distribution to setup a SMS server.
View 2 Replies View RelatedI want to install a DLNA server on my ubuntu home server. It will primarily be used for photo browsing on my PS3, but general media support would be nice. (I use Squeezebox server for music.) What are my options, and what are the main difference between them.
View 9 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.
View 5 Replies View Related