I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
At home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedI have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View Relatedi am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies View RelatedI run a mediaserver on Archlinux, working perfectly (or almost). I have set up NFS v3 and that worked for me on these clients:
- Debian Lenny
- Archlinux 64bit
Now I've upgraded my Lenny-box to squeeze and I see that 2 of my 3 shared folders (tdone and twatch) are mounted like they should and the third one (media) doesn't come up. A 'mount -a' as root gives this error: mount.nfs4: access denied by server while mounting (null) My relevant fstab-lines:
[Code]....
how I can go about debugging this?
I have some beginner questions about DHCP, Avahi, and configuring a small home LAN.Suppose I have a dynamic IP address assigned by my ISP, which requires DHCP be enabled in my dsl modem/router/"firewall" [sic]. Suppose for simplicity I have just one PC behind the dsl modem.I think "enabling DHCP" in the modem/router means that a DHCP client runs on the router, which communicates with a DHCP server run by my ISP when I boot up a PC on my LAN. Is that guess correct? Can I get DHCP to assign a particular local IP, say 192.168.1.10 (which is not the one taken by the router--- for this discussion, let's say that is 192.168.1.0) to my PC each time I boot it up?
Now suppose I want to build a stand-alone firewall, so that my LAN will have the firewall and the first PC behind the modem, with the first PC virtually behind the firewall. By default, I think these will both have DHCP clients running which I need to configure properly. The firewall should also have a DHCP server which should control how local IP addresses are assigned, correct? I should try to arrange that the LAN has only DHCP server, only one NTP timeserver, only one DNS nameserver, correct?My first PC seems to have installed an autorun client called Avahi, which performs DNS multicast services and incorporates something called zeroconf which seems to have something to do with remote desktops, which I don't need and which is a potential security hazard. But it seems that Avahi is an intrinsic part of the KDE desktop and cannot be removed. Just want to be sure that Avahi can coexist comfortably with dhcp3-client, which is also installed on that PC. They perform different tasks, correct?If I can get the stand-alone firewall to work, I know I need to turn off the commercial firewall in the dslmodem/router/firewall device. Should I purchase a bridge and try to turn off the routing function also?
I am trying to find the proper way to setup a NFS4 Server with two clients. I have:
FileServer: CentOS 5.5
-IP:10.1.1.200
-User: Max
-Export: /FS-Data
[code]....
User/Group Max owns FS-Data on the FileServer, How do I go about mounting it on the clients, since root can only mount?
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies View Relatedi'm trying to setup a nfs4 server and client. i followed the instructions in
[URL]
The SERVER is on 192.168.89.1 running Xubuntu 10.04, and the CLIENT is on 192.168.89.128 running Ubuntu 10.10. Firewall is disabled on both the server and the client for testing purposes. /etc/default/nfs-kernel-server on the SERVER:
Code:
# Number of servers to start up
RPCNFSDCOUNT=8
# Runtime priority of server (see nice(1))
[code]....
because we want UID/GUID to be mapped from names. This way, server and client do not need the users to share same UID/GUID. In that case,
1. Should i set those 2 fields to "no" and "yes" respectively instead?
2. Or else, how do i make sure that the uid on the server is mapped to something useful on the client instead of nobody and nogroup?
I am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....
I'm trying to setup a NAS for my network, the only problem is that I can't figure out how to do it. On my network I have about 3 computers however only I only use 2 of them so I thought that maybe I could use the third computer in such a way that I could access it 24/7 from the internet as a server for all of my files (school papers, music etc etc...). The only problem is that I don't know where to get started. Both of the computers I'm currently using are Windows and the one that I,hopefully, can turn into a server is running on Ubuntu.
View 4 Replies View RelatedI want configuration a DNS server for my area! What DNS server software is better than other software?
View 4 Replies View RelatedTwo nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies View RelatedI'm trying to set up a *simple* MTA in my local network. The only thing it should be able to do is send system / daemon mails to admin@mylocaldomain. but at the moment I'm pretty much overwhelmed by everything i *should* know in order to set up this MTA
my infrastructure:
- servers:
* test01.mylocaldomain --> should send mails (with exim) to admin@mylocaldomain
* dns01.mylocaldomain --> dns-server
* mail.mylocaldomain --> mail-server (postfix / iredmail package)
I configured exim to be in "internet"-mode. now i have a variety of errors I can choose from (and a variety of solutions that i don't like ).. my test is always an email from test01.mylocaldomain:
echo "Hello World" | mail -s Testmail admin@mylocaldomain
- after running the config, i get the error: admin@mylocaldomain: all relevant MX records point to non-existent hosts --> google says, edit and udpate update-exim4.conf.conf --> dc_relay_domains='mylocaldomain' --> but this exim installation should not be a relay at all. it should only be able to SEND (to this domain), not deliver it. or do i get something wrong?
- after i added dc_relay_domains='mylocaldomain', i get --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 550 5.1.1 <root@mylocaldomain>: Sender address rejected: User unknown in virtual mailbox table --> but i don't want to create an account on the mailserver for the SENDER...
- ...so i thought, i'd config exim with the domain "test01.mylocaldomain" (including the server name), so that the sender is clearly from another domain than the mail server handles (e.g. user@test01.mylocaldomain).. but then i get this --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 450 4.1.8 <root@test01.mylocaldomain>: Sender address rejected: Domain not found
I really just wanna send mails in my local network.
I will see ipcam in my local network from my tablets. I'm install server/client but I can't even ping my Ipcam from my tablet.I'm ping my ipcam from my server
Code: Select allping 10.42.0.22
PING 10.42.0.22 (10.42.0.22) 56(84) bytes of data.
64 bytes from 10.42.0.22: icmp_seq=1 ttl=64 time=0.639 ms
eth1:1 Link encap:Ethernet HWaddr 00:25:22:1c:6e:05
inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.42.0.1 P-t-P:10.42.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1775 errors:0 dropped:0 overruns:0 frame:0
[code]...
my tablet can receive ip, can see ftp on server but can't see anything in my home network.
I have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
I have three Debian systems running, along with several XP laptops, PS3 and two DirecTV systems. I use two of the three Debian systems as media servers, and the third is an older system mostly for playing around with. My home network is running fine with the following nuisance. The two newer Debian (Lenny) systems are <barney> and <mitzi>, the older is named <oscar>, running Debian Sarge 3.1. From either locally or remote login to <barney> and <mitzi> I can ssh into either of the other two systems, however when logged into <oscar> I cannot ssh by name to either of the other systems. e.g. ssh: mitzi: Temporary failure in name resolution..However, from <oscar> I can ping outside my network (e.g. ping www.google.com) with no problems.I can also ssh to the other systems via IP address, just not by name.
I've compared the /etc/ssh/ssh_config, /etc/resolv.conf, /etc/ssh/sshd_config and other files between the two systems and not seeing anything peculiar. arp, route, etc., don't show different behavior between the systems either.
It it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
I have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan
View 3 Replies View Relatedhow to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies View RelatedI am attempting to setup the following:
1.User login/authentication via a single NIS server.
2. User home directory should also be on the Same NIS server.
3. If possible to setup a single shared home directory for all users.
OpenSuse version 11.2 There are twelve workstations from which users will login using the NIS authentication. I have succeeded in setting up NI server. However login fails as the home directory is not accessible.
I'd like to set up my home network with an Ubuntu file/internet server. In addition, I would use this server to monitor internet traffic. What hardware/software would be required?
My current network is as follows:
Laptop 1 Ubuntu 9.1
Laptop 2 Vista
Laptop 3 XP
Desktop Ubuntu 9.04 (would be used as server)
All connected thru linksys wireless router to cable modem.
I've illustrated it on this picture, and hope to get the help i need to set it up... [URL]Thow it has to be furture secured, in that meaning it has to be abel to attach a eth2 on the main server, so i have 3 NIC's.Also, i want to have fully controll over ports, IP/MAC's and data overview (Such as a view of the files beeing downloadet/uploadet).
View 3 Replies View RelatedI want to try and set up a server on a home PC, using Debian of course, rather than on a remote server. hosting web pages, a mail server and a file server etc. Installation looks fairly straightforward. However, there are one or two things that are not too clear to me:
A. Is it best to connect the server using Ethernet or is wireless OK with network manager or wicd or doesn't it matter? Answer: Wired ethernet is best
B. if the IP of my desktop Debian (wireless) has the same IP as the server, how do I connect from my desktop? The router has its own static IP address but assigns two different IP addresses, one to the desktop computer and the other to the PC being used as a server.
C. I have a static IP and a domain.com without hosting but it's status is "parked". Not too sure what this implies. [When domain is "parked" it means it is still hosted by the company that registered it. So it's necessary to "unpark" it.] It was very easy to unpark the domain as explained in a reply post below.
D. setting up DNS with the static IP? [Answer: in the case of the company i registered with, I didn't have to set up any DNS because the domain works with the company name servers, so it was much less complicated than i imagined.]
E. I seem to have only ONE Primary DNS for my connection.
F. it's better on a server to have no Desktop. It looks easy enough to install but, accustomed though I am to the CLI. configuring without cut and paste is very tedious.Can anyone suggest a way round this? I've thought of trying to use the lynx browser and nano. [Answer: Best to install the server without a Desktop. For editing files I used PuTTy, which enables me to cut and paste and nano having found vi pretty unfriendly. One day i'll get round to using vi or vim which may be more than a blast from the past! Once the thing is fully set up it would be nice to connect to the server from the first desktop computer using GUI tools.
I'm trying to pass multiple dpmains thru one ubuntu server to various hosts on my local network.
[url] should be sent to the /var/www folder on the local host.
[url] should be forwarded to an IIS box on my local network (owa.nunya.local)
[url] should be sent to another ubunto box on my local network (smtp.biznet.net)
I have tried placing VirtualHost entries in /etc/apache2/sites-available/default and [url]and [url] both work but [url] gets forwarded to the c:inetpub folder on the IIS box.
What would be necessary to run an ftp server (or a web server) on my local PC so that other people I know could access it and download stuff from it? The idea is to share photos, videos etc with friends/family where the files are a bit too big for email. (All 100% legal, own-content, no copyright issues, needless to say). Security isn't that vital, I'd just put files in the ftp directory, email the link and let them download the files, then remove them again. No passwords are required, and no uploads.
Obviously there's the problem that both computers have to be on at the same time, and I assume I'd have to change my computer's firewall settings and my router's settings to allow the traffic through, but my question is more basic than that - is it even possible? My internet connection is through a router, and as I understand it, my router has the IP address, not my computer. So I can connect through my router using my computer's IP address, but only my router knows my computer's IP address, and all the rest of the internet just sees my router and its IP address. Which means (I think) that I can't just send my IP address for my family to connect to, because that only gets them as far as my router, and the router would have no idea what to do with such requests. Am I right so far?
So is there any way for my family's computers to contact an FTP server or a web server running on my computer? Or does it require some kind of intermediary server to act as a traffic-forwarder? Is there such a thing? I'm assuming that setting up little private torrents would be fiddly and inefficient. Or would it be better/simpler to use one of the free filesharing services and put up with the (sometimes not too family-friendly) adverts associated with them?
I can't get past the "scp -p id_rsa.pub" step; ssh fails with "Could not resolve hostname" errors. Both machines are connected with a hub. I've also tried using the IP address in the place of hostnames with no avail. Both machines can ping eachother successfully.The server has the "openssh-server" package installed.
View 1 Replies View RelatedI've decided to try and setup a simple home server with Debian. I can either install the OS on a compact flash card and use hard disks as storage, or just install everything on the hard disk. I'd also like to set up a software raid for mirroring. I've never done this before, and most recently updated documentation i've found is for ubuntu. Any advice or good links someone can point me to on how to set up raid? I'd like to encrypt my hard disks but I don't know what my options are. It seems like people point to truecrypt, but i'm wondering what else is out there or if people have any advice on this. Would it be feasible to do this if I install the OS on a compact flash card and?
View 3 Replies View RelatedI am connecting servers using NFS4 the shared directories are on servers running Debian 4 while the one who read from them is Debian 5.0.3. The problem is one of these shared servers suddenly stop responding and you cannot list it from Debian 5 server, also df hang, and the web application that is using it does not respond to requests that use this shared directory since it is blocked. Then the load on the server start to increase until the server cannot respond (over 90). I have found many entries in the syslog that refer to this like:
ma25555 kernel: [1200285.732919] nfs: server 10.xxx.xxx.xxx not responding, still trying
Dec 31 08:16:33 ma25555 kernel: [1200289.815378] INFO: task java:9702 blocked for more than 120 seconds.
Dec 31 08:16:33 ma25555 kernel: [1200289.835249] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
code....
I have tried the connection between the 2 servers using ping for one day and all are OK (zero lost)
There are 3 other servers that are running Debian 4 and are working fine.