I have set up Debian 'Lenny' on my machine at home. I work in the computer industry but I am not soo techie so I want to find the best way to learn Linux from scratch.
What would be the best source of documents to find what is available in Lenny eg. software and how to install them, how to configure package manager, configure wireless adapters, use UNIX commands for linux and install Apache, MySQL and PHP?
I've been wanting to have the ability to ssh into my Win 7 home machine from my laptop, from anywhere and I'm not sure how to do this. Can someone give me some advice or point me to an article that could show me how to do this? Also, would this affect the security of my home machine (sometimes I do banking there)? The home machine has windows 7 Home X64 bit OS under a Linksys router. The laptop is running Ubuntu Lucid.
View 3 Replies View RelatedI'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.
That means i'll have to start at the START I guess.
how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)
I've decided to try and setup a simple home server with Debian. I can either install the OS on a compact flash card and use hard disks as storage, or just install everything on the hard disk. I'd also like to set up a software raid for mirroring. I've never done this before, and most recently updated documentation i've found is for ubuntu. Any advice or good links someone can point me to on how to set up raid? I'd like to encrypt my hard disks but I don't know what my options are. It seems like people point to truecrypt, but i'm wondering what else is out there or if people have any advice on this. Would it be feasible to do this if I install the OS on a compact flash card and?
View 3 Replies View RelatedI have a very strange problem for me. In this example dns and IP is hiden for security reason. When I try from putty manager to connect to my Debian and write next command:
[Code]...
Any guide which describes setting up a vpn connection on Lenny using the command-line and NOT the gui?
I assume "aptitude install network-manager-openvpn" is the package I'll need but what files nor how to configure them.
I want to configure a conncetion to ipvanish.
i am trying to get a pxe server working on a debian so other clients can boot off it. the problem has two parts.
1. getting the pxe working. so far the tftp part doesnt work. the client says tftp error. so i guess the dhcp portion is working, but theres something wrong with the /var/lib/tftpboot or the deamon config itself.
2. the other issue is that in the shop many system's have non-working disk drives. also many of them do not have a usb boot option in the bios. all i need to do is get the "bare" kernel file or grub(?) to boot over pxe and give me the ability to boot from a usb flash drive and load the rest of the linux files from there. my primary intention is NOT netinstall. although it wouldnt hurt. my intention is running a linux live usb on systems without bios usb boot support. ive read somewhere that a full pxe live boot requires nfs setup. i am asking for that, just so i can boot from a flash drive.
I'm attempting to set up a DNS server using Debian Lenny. I followed the instructions on this page:
[URL]
and it's not resolving domain names.
I recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies View RelatedI'm trying to find good instructions to help me set up a print server with a usb printer on a Lenny box with no GUI. The printer is a Brother HL-2170W. Can anyone point me in the right direction?
View 2 Replies View RelatedI currently have a debian lenny high performance cluster running seamlessly using dhcp and tftpd-hpa. All nodes are completely diskless, and i would like to keep it that way. I now would like to have a client boot over local into a full KDE desktop.
Here's the cache.
1. I would like the client to also be a node. I would like it to handle processing as the other nodes do, but this one with a full desktop, with ALL data and privileges accessible.
2. The client will have its own workstation graphics. It will need to have that driver loaded without slowing the system.
3. Client will need to be able to use its own usb, bd-rom, dvd, audio, etc. even though it will be booting into the HPC.
4. Wireless. I cannot run 70 ft of lan across an apartment. not happening.
The idea is a media center applicable "powerhouse" with high-end power and graphics for easy media editing, 3d creation, and gaming. Will also be used for webcache over all local, file sharing, and other server applications.
HPC specs:
-headnode: hp compaq p4-ht 3.2 ghz, 4x500gb, 4gb mem, gigabit ethernet, wireless-N
-nodes: 4x p4-ht 2.2 ghz, 2gb mem, no-name brand slim desktops; 2x panasonic toughbooks p4-mobile 1.8 ghz, 1.5gb mem; 3x gateway p3 unknown specs; and 1 hp 530 notebook 1.6ghz core2 duo, 1.5gb mem
-client: hp compaq core2 duo 2.13 ghz, 4gb mem, wireless n, bd-rom, 2x dvd-rom, usb 3.0 card, bluetooth, 1gb AGP nvidia geforce 6800 dual-dvi, no hd.
I need to know how to set up this PXE.
I have installed a Clearos box (believe this is based on redhat/centos)in our office as this is an easy setup to try and replace a windows box. We can add our windows pc so it as it acts like a domain controller.I would like to get a couple of Linux machine on the network such as Mint, Debian Lenny or ubuntu. The problem here is I need to find a way of getting these pc to as such login to the domain so they authenticating with the clearos box to login. Is there an easy way of doing this.
View 1 Replies View RelatedI have a dual boot computer. I seem to be having a bit of a problem with Grub lately. Every time I do any kind of update in Debian Lenny AMD 64 it borks my Grub. The first time I had to change a few lines in menu.lst (hd1,1 to hd0,1), no problem. The second time, things went downhill fast and G-Parted was giving me errors on my NTFS partitions. I had to do an XP repair, fixboot, and I had to reinstall Grub completely to the MBR.
Now, I having a "Grub Loading stage1.5. Grub loading, please wait.... Error 22". All I did was update Debian Linux and shut down. From my initial searches this is an error relating to not finding the correct partition. I have booted with a G-Part CD and it shows all my partitions. I do have a Windows XP Home boot cd if I need it. Here is my partition outline if you need it:
/dev/sda1 NTFS (Windows) flags--boot
/dev/sda2 Ext3 (Linux)
/dev/sda3 FAT32 (shared space between Windows and Linux)
/dev/sda4 extended
/dev/sda5 linux-swap
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
I am trying to set up a SunBlade 150 with 512MB RAM, ATI Video, 80GB Harddrive on Lenny.
My Goals:
1. Have Web Server
2. Have Mail Server
3. Be able to connect to Lenny from Windows 7 for file sharing
4. Be able to ADMINSTER Lenny from Windows using Exceed in a GUI environment.
Can someone please give me a step-by-step that I might be able to follow. I have already tried to install Lenny with the desktop stuff and the system locks up. I have reinstalled this thing about 6 times and am about to give up and reload Solaris on this stupid machine and try to figure it out.
How to setup vncserver and keep it running in the background after restart on Lenny workstation? The admin should be able to connect every time via vncviewer to this workstation.
View 2 Replies View RelatedI want to try and set up a server on a home PC, using Debian of course, rather than on a remote server. hosting web pages, a mail server and a file server etc. Installation looks fairly straightforward. However, there are one or two things that are not too clear to me:
A. Is it best to connect the server using Ethernet or is wireless OK with network manager or wicd or doesn't it matter? Answer: Wired ethernet is best
B. if the IP of my desktop Debian (wireless) has the same IP as the server, how do I connect from my desktop? The router has its own static IP address but assigns two different IP addresses, one to the desktop computer and the other to the PC being used as a server.
C. I have a static IP and a domain.com without hosting but it's status is "parked". Not too sure what this implies. [When domain is "parked" it means it is still hosted by the company that registered it. So it's necessary to "unpark" it.] It was very easy to unpark the domain as explained in a reply post below.
D. setting up DNS with the static IP? [Answer: in the case of the company i registered with, I didn't have to set up any DNS because the domain works with the company name servers, so it was much less complicated than i imagined.]
E. I seem to have only ONE Primary DNS for my connection.
F. it's better on a server to have no Desktop. It looks easy enough to install but, accustomed though I am to the CLI. configuring without cut and paste is very tedious.Can anyone suggest a way round this? I've thought of trying to use the lynx browser and nano. [Answer: Best to install the server without a Desktop. For editing files I used PuTTy, which enables me to cut and paste and nano having found vi pretty unfriendly. One day i'll get round to using vi or vim which may be more than a blast from the past! Once the thing is fully set up it would be nice to connect to the server from the first desktop computer using GUI tools.
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
Other than my encrypted home directory, I am all set to switch from ubuntu to Debian.Is it sufficient to install ecryptfs-utils or do I need to setup a script or something similar for it to automatically decrypt my home directory on login?
View 4 Replies View RelatedIt's a dell ubuntu. But I don't know why I can't do:
myuser@192.168.0.103
which is my local-ip.
what is the best way to turn a pre 2000 macpro into a home/small office firewall?
View 10 Replies View RelatedI'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
I've got a machine running Slackware64 13.1, and Ubuntu 10.10 32-bit, and today, while installing python-ogre in Ubuntu, I was informed that I had run out of hard drive space on my /home partition.
The /home partition is shared between Slack and Ubuntu, and just earlier today, upon booting into Ubuntu, I got a message that the /home partition couldn't be mounted (before most of the system had loaded. It was still on the purple loading screen) Well simply rebooting fixed this. Then today I suddenly ran out of space, and I thought I was only about half way through the allotted space. Well after some investigation I discovered a folder called /home/_ which was an exact duplicate of /home. Well in need of some extra hard drive space, and in conclusion that it was unneeded, I deleted it. And when I deleted it, everything in /home deleted as well.
First off, what is this /home/_ folder? Where could it have come from? The creation time is about 7 minutes after I created a new user on Slackware, and I think it might have been about 7 minutes after creating that user that I had changed its home directory so that Ubuntu's user config files wouldn't conflict with Slackware's.
Secondly, why did /home's contents delete when I removed /home/_? I already figured out there isn't any way of recovering those files (except for the files I luckily synced with Dropbox)
Third, is there some way to prevent this from happening again? Does anyone have any experience with this? Has anyone heard of this happening before? I already know that /home/_ was not a symbolic link.
I can set-up an ssh tunnel from machine A to Machine B:-
fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com
I can successfully logon to machine A to Machine B.
what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.
I'm setting up a Linux machine thet'll be shared by several users, some of whom will be admins. Is there a way to restrict access to a user's home folder (encrypt or block completely) for other regular/admin users?
View 3 Replies View RelatedWhat is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they
have a static IP
have a domain name
are always connected to the same network
My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.
I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran fine. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.
View 2 Replies View RelatedIt it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
I would like to use an extra physical hard drive in my linux server to provide my wife a place to backup her Windows XP desktop.I am willing to format this drive as NTFS (or anything else) and have it dedicated to this purpose. I am wondering what is the easiest way to proceed?
View 1 Replies View RelatedI've recently started trying out Debian 5 coming from Ubuntu. I'm very much in love with KDE 4.4 now they've fix it so it actually runs. but I'm unable to install it on Debian 5.
Right now I have Debian 5.0.3 on an Asus Eee netbook, and it's running KDE 3.5.x. I installed this from a Disk marked Debian, Official CD KDE i386, Debian GNU/Linux 5.0.3 "Lenny" (I bought the entire 33 CD set.)
I've tried to install KDE 4.x via synaptic, using the kdebase-runtime-bin-kde 4:4.1.0-2.
Even after a 3h download and install, it still boots with KDE 3.x. There is no switching to KDE 4.x in the KDM as well.
I've been unable to find a repository. I thought about using a Ubuntu KDE install, but after reading some posts here, I thought I'd better ask your opinions first. (Which I should ask too. if I see programs I like in Ubuntu, should I just compile them from tarballs instead of the .DEB binary to make sure they work in Debian 5?)
Should I wait till Debian.org actually puts KDE 4.x on their repositories (I hear the next version will have KDE 4.5.x on disk.)
System:
Asus Eee 1000HA
1.67ghz ATOM processor
2g memory
160g HD
Grub2
Debian 5.0.3, w/KDE 3.5.10
Ubuntu 9.04/Gnome
