Every time I try to install squid through yum. #yum install squid
I keep getting this error thread.error: can't start new thread
Now I have seen several post on this error but and tried several solutions but I still can not get yum to work.
I am using Cent 0S but nothing seems to work.
I have configured router(192.168.1.2) to serve only one machine with IP - '192.168.1.6' and set up SQUID proxy on '192.168.1.6'. I have defined some rules(ACL) regarding connections to internet on SQUID proxy.
I changed the Gateway of rest of machine (192.168.1.60 - 192.168.1.69) from '192.168.1.2' to '192.168.1.6'.
The policies which I defined in SQUID is working properly but 'Linux Evolution mail' client is not fetching mails.
Is I have to do any other settings on 'Linux System' or 'Evolution mail client'.
today there was problem with isp but we fix it now other machine run internet fine but when we run through squid proxy machine it give this message to all users. what fields column values config i should check it. i also reset the cache make empty folder. restart machine also service clear the logs . it is on centos 5.4
see below message
ERROR: The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: Read Error
The system returned:
(104) Connection reset by peerAn error condition occurred while reading data from the network. Please retry your request. Your cache administrator is root.
I am using Fedora Core 9.0 and Squid Cache: Version 3.0.STABLE2 .
Now i am trying to use the squid as a proxy server but its not working its giving error like this ...
While trying to retrieve the URL: /
The following error was encountered:
Invalid URL Some aspect of the requested URL is incorrect.
Possible problems:
Here is my squid.conf
While trying to retrieve the URL: /
I have also try to forward the traffic coming on 3128 to 80 but its not working:
I'm running a squid server on debian lenny with ntlm_auth.
Everything is working good after following those two tutorials : [url] and [url]
As all was working perfectly i decided to rebbot my server, and after reboot the ntlm-auth was not working anymore.
When i tried to run the command "wbinfo" with many options i had this error message "error looking up domain users" or"error looking up domain group" so i think that the problem deals with winbind module.
I know that proxy user needs rights and that after reboot the rights are reseted, so this problem doesn't come from here.
And when i try to open IE with a client i have this "cache accesss denied" because the ntlm_auth wasn't done.
I tried to restart all services (samba,winbind,squid) without any success, only the "kinit" command is still working...
What is going on with winbind when the server is rebooted ?
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
i want to setup squid proxy server at my home. my service provider has ISA server install on its machine. in windows as a client we have to enter proxy settings manually to IE and firefox. but now in squid where i have to define to use this proxy settings. and what about /etc/resolv.conf . my service provider's connection settings are stated as under.:
IP ADDR= 192.168.1.x
subnet mask=255.255.255.0
Proxy= 192.168.1.1 port= 8080
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
i need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments):
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
[code].....
I am trying to configure squid with Fedora 10 to use it as a transparent proxy webcache.Is there any good tutorial you would recommend to a novice?
View 1 Replies View RelatedI have to use squid proxy server on fedora14 to develop the application/ software based on the Proxy sever analysing and count number of user and downloaded file size... .My main problems are, I'm not able to configure the access.log file in "Common Logfile Format" and how to develop the application
View 1 Replies View Relatedwe having more than 5000 users and will have 7 squid proxy servers with high end configuration upto 4gb ram n 320*5 HD in rhel4&5 most of them complaining that at peak hours their browsing speed is slow but we are having 1gbpgs link at peak hours i.e when established connections r flowing more than 550 browsing gets slow how to do fine tuning are squid is only responsible to access upto 600 connections
View 2 Replies View RelatedI'm trying to set up squid proxy as a replacement for a cgiproxy perl script.I would like to be able to hit it with a url, and have it pass everything back to the browser, something like URL... much the same way the cgiproxy script works.
This is my first time messing with squid, and I am completely lost. Does anyone have a link to some very detailed step by step instructions on how to do this?Can someone please tell me *which* kind of proxy I'm looking for? I see "interception proxy" or "transparent proxy" and a bunch of other terms thrown around in the docs, but nothing I have seen tells me which of those I'm actually looking for, or if what I'm trying to do is even possible with squid.
I need to setup a squid 3 proxy with https bumping. Unfortunately I'm not very familiar with squid and https in general.
I already perfomed the following steps:
1.) compile from source
Code: Select all./configure --with-openssl --enable-ssl-crtd
make
make install
2.) configuration (http)
I used this guide: [URL]
3.) configuration (https)
[URL]
The server is now working for http and https, but is the server secure, too? Is the default config already secure or do I need to configure additional security features? (e.g. things like cert validation, cert pinning, [dont know what's importend], ...)
I have 4 servers running squid/3.1.1 proxy server. Since the latest version I can no longer FTP. I have posted this problem in multiple places but have received almost no response. I've found several other post to this problem throughout the Internet which have also gone unanswered. So, once again, I thought I'd give it a try. As I said "I have 4 servers running the newest version of Squid". When I try to access an ftp, any ftp, I receive an error (check attached image). This was never a problem until just recently. Squid should work perfectly find with ftp, it is not a strictly http proxy.
I turned my firewall off just to make sure, still had the same issue. If I jump directly on the server itself with no proxy settings set in the browser it will work fine. As soon as I set the browser setting to access the Squid software I get the same error. I've included my squid config (which is unchanged from the default settings), maybe somebody better versed than myself can point out an obvious flaw. Everything else seem to work just fine, it's only FTP that's a problem.
I have a reverse proxy set up with squid. I'm going to try and explain what it's doing and I apologize for it being confusing, I'll do the best I can to describe my problem. First, it's for our phone system. We run a ShoreTel Voip system. The owner has decided he wants me to setup MCM (Mobile Call Manager), which from what I can see is an under developed, and almost impossible to get help with Shoretel software. But he's convinced he needs it for his Iphone. It's supposed to, in a nutshell, turn his Iphone into his work phone with all the advantages and doodads that come with it. Apparently, "they have an app for that". On the server side, I need to setup a reverse proxy back into the network on our phone server. Simple enough, I did this with squid. I used the following lines:
Code:
http_port 80 accel defaultsite=172.17.137.7
cache_peer http://172.17.137.7 parent 80 0 no-query originserver name=myAccel
acl our_sites dstdomain http://172.17.137.7
[code]....
Code:
always_direct allow all It most definitely is allowing traffic back to the phone server, the problem is, it hands out my internal server address to the outside client. So for instance, if I connect to the outside routable address with my phone, it will immediately change the url to http://172.17.137.7 which is the inside nat address of my phone server. Which of course doesn't work, since I couldn't browse to that address from the outside. It does however work from the inside of the network, obviously because 172.17.137.7 is accessible from the inside.
I followed this guide: [URL] and restart the Squid Server with no errors but when I try to SSH into it:
Code:
ssh -L 8080:squidserver:8080 user@squidserver
It just hangs there for a long time, not timing out and eventually (after a long wait) I get this:
Code:
ssh_exchange_identification: Connection closed by remote host
What could be the problem? I can SSH normally into the computer, but not into the proxy server. Do I need to forward the 8080 port on that network?
I am trying to set up squid to make switching proxies easier. I have a laptop which I use at work and at home. At work, I need to connect to the internet via a authenticated proxy. At home, I connect directly to via mobile broadband. So I end up switching proxy settings twice daily, which is just irritating! To solve this I want to set up a system whereby I never have to worry about a proxy - my browser sees a direct internet connection which squid (on my computer) intercepts and forwards either to the mobile broadband connection or to the work proxy (along with the required authentication) depending on which is available. I've read various articles on how to do clever things with iptables and squid, but I don't understand enough of the networking jargon or concepts to know when I need to change to make it work in my situation, or if it is even possible.
View 2 Replies View RelatedI need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?
acl blocksites url_regex yahoo http_access deny blocksites
I have also tried saving some url & filter content in a file and edited configuration as follows,
acl blocksites url_regex "/etc/squid/squid-block.acl" http_access deny blocksites
The squid-block.acl file contents are, .cricinfo.com mp3
I have set up squid3 and dhcp server on my Ubuntu 10.04 box with IP address of 192.168.0.160. Single network card.Squid runs on port 3148. Everything works fine for the users provided that I set up the proxy details manually on each client pc.I want to set up the Squid to run as a transparent proxy and after reading around I have done the following.In the Squid3 conf file I have entered http_port 3148 transparent.Dropping to Root ( sudo -i )However the transparent proxy does not work and if I enter iptables -L I can see that the rule above has not been retained. The default rules in iptables only show up.
View 5 Replies View RelatedWe have two offices suppose A and B. At office A, we use centos 5.3 computer as router and squid proxy server. At office B we use a cisco router to connect to Internet. Computers at office A that has direct access to Internet can access computers behind cisco router at office B using vnc viewer. But computers at office A that can use internet only through squid proxy can't access computers behind cisco router at office B. Is there any way so that I could allow squid clients to access computer behind cisco router at office B using vnc viewer.
View 3 Replies View RelatedHow to make squid proxy transparent?I have configured a Squid proxy server with some ACLs but we have to check from client side whether those ACLs work or not ,I have to open their firefox and manually enter my machine's i.e. proxy server's ip, only after entering this ip , Those ACLs work properly.But now I want to make it work without manually entering the proxy on clients machine.I guess transparent proxy is the solution, but how to configure it/Please guide me and I am one of the machine in LAN.
View 1 Replies View RelatedI am a newbie to SQUID.How to configure it and make it active in my system?
View 1 Replies View Relatedhttp_port 3128 transparent --> What does this mean? Is this a only thing we do to make Squid Proxy Transparent?
View 2 Replies View RelatedI am using squid server. I want to redirect one perticular url request to other squid proxy server .
View 1 Replies View RelatedI am trying to install Squid 2.6 as Transparent proxy server.Can anyone provide the step by step configuration details
View 8 Replies View Relatedi m using centos 5.6 x86 give us guideline if possible, we have squid transparent proxy, the ip is set 10.0.1.85, this is as gateway we enter in window client pc to browse. now we want to block some website so we try below two method does not work, can you check if anything wrong in this, we enter this all starting of file squid.conf.
View 3 Replies View Related
