OpenSUSE Hardware :: Set Size Display ?
Jan 16, 2011Linux set size display auto 1024x768, i need to change size 1152x864 and then i restarted, size was the last 1024x768. how turn off "auto"
View 9 Replies
ADVERTISEMENT
OpenSUSE Install :: Display Size Only 800x600
Aug 8, 2010Continuing with my 11.3 install on an old Toshiba Tecra M1 laptop:
When i was installing, i had the options of 1600x1200, 1280x1024, 1024x768 etc.
I chose the 1024x768, because it fit the laptop screen perfectly.
But after the installation, the highest resolution i get is 800x600, and it's wasting a bunch of real estate on the screen.
I mean, if during installation it could do 1024x768, why not after the install? obviously the graphics card supported it.
OpenSUSE Install :: Wrong Display Size On Resume - 11.2
Aug 25, 2010I installed opensuse 11.2 on ASUS R2E nicely It have a 7" touchscreen and works nice. The screen is correctly settled to 800x480 on boot however after a S2RAM it is reinitialized as 800x600. I made an xorg.conf with only one fixed mode on 800x480 but daesn't seems to be considered on resume. After cold boot sax2 get the right size (800x480) and after resume 800x600 The video chipset is intel 945 GM.
May this be related to hardware reinitialization ? How to re-initialize X on resume ?
OpenSUSE :: Make The Guest OS's Screen (or Display) Full Size?
Sep 26, 2010I know that you can make it full screen, however it just makes the background OS's background black, and still provides a smaller display. Is it possible to make the guest OS's screen (or display) full size?
View 6 Replies View RelatedOpenSUSE Install :: 11.4 - Wrong Display Size Under VMware Server
Mar 20, 2011Is there some better way of getting my display size set to 1280x960 when I launch openSUSE 11.4 under VMware Server? Here's what I've done so far: I am running Windows 7 on an AMD Phenom II system (motherboard: Gigabyte 880GMA-UD2H). I installed VMware Server (version 2.0.2) so that I can run openSUSE 11.4. The initial install went pretty smoothly. However, the display size was set to 800x500. I attempted to set it to 1280x960 by changing the /etc/X11/xorg.conf.d/50-monitor.conf file as follows:
Code:
/etc/X11/xorg.conf.d/50-monitor.conf
Section "Monitor"
Identifier "Default Monitor"
## If your monitor doesn't support DDC you may override the
## defaults here
# HorizSync 28-85
# VertRefresh 50-100
HorizSync 1-10000
VertRefresh 1-10000
## Add your mode lines here, use e.g the cvt tool
Option "PreferredMode" "1280x960_60.00"
# 1280x960 59.94 Hz (CVT 1.23M3) hsync: 59.70 kHz; pclk: 101.25 MHz
Modeline "1280x960_60.00" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync
This resulted in a display size of 1734x1342 (or something close to that). I noted from the /var/log/Xorg.0.log file that the vmwlegacy driver is being used instead of the vmware svga driver. There is a note that the vmwlegacy driver does not support the "PreferredMode" setting in the monitor section of the xorg.conf files. For the time being, I have set my horizontal and vertical rates to 60kHz and 60Hz, respectively. This does limit the maximum display size to 1280x960, but for all the wrong reasons. How do I set up my system to get the correct display size?
OpenSUSE Hardware :: System Won't Retain Display Size Setting In SAX2
Jul 28, 2010System won't retain 16:9 display size setting in YaST (SaX2). I'm using SuSE 11.1 (64 bit).
SaX2 settings as follows:
Monitor is Samsung Syncmaster XL2370-1 (digital). Resolution is set to 1920X1080 (1080p). Diagonal measurement set to 23 inches. Display size indicates 509 m.m. X 286 m.m. (20 3/8" X 11 1/2").
Aspect ratio is entered as 16:9, but after saving and restarting computer it keeps coming back as 16:10.
Samsung literature says 16:9, and measurements above confirm this.
So why does it keep going back to 16:10, and how can I get it to retain 16:9? (Same thing happens on another computer, also running SuSE 11.1, and with a second of these same monitors.)
OpenSUSE Install :: Desktop Display Size Too Large Want Smaller As Default
Dec 28, 2009I am using OS 11.0 Every time I boot my laptop (dell inspiron 9300 - ati video M300). I get the desktop display as 1920 X 1200. This is too large for my default. I use KRandRTray to resize back to 1024 X 768. How can I set 1024 X 768 as the default but still have the option to go to 1920 X 1200?
View 3 Replies View RelatedFedora :: Set The Display Size On X Forwarding?
Jul 22, 2010How to set the display size avoiding taking up the whole screen.e.g.$ ssh -XC -c blowfish user@ip_address display:1 "gnome-panel"Does it take up the complete screen?
View 4 Replies View RelatedOpenSUSE Hardware :: Document Size Incorrect - How To Get Correct Size
Jun 8, 2011Have just installed Lexmark s605 printer on wireless network, printer works ok but when i print a document even though it is showing the correct size on 'print preview', the printed output is on the page is tiny and and 90deg rotated, I've tried various drivers from the Lexmark website, and also messing about in printer settings but nothing seems to make any difference.
View 3 Replies View RelatedHardware :: Get A 21.5" Monitor To Display At The Right Size - Ubuntu 10.04?
Nov 29, 2010After getting tired of squinting at my netbook screen (System 76 Starling) I bought a 21.5" Asus VE228H monitor. It works beautifully with the right resolution and aspect, EXCEPT that the driver Ubuntu is using is for a 22" monitor, and the image on the screen has about 1/8" missing all around. Sadly, this eliminates the menu bar at the top of the screen. Moving the image down doesn't help. Is there any way to shrink the image, or get Ubuntu to use a driver for a 20" or 21" monitor instead of 22"? I've been using computers since DOS command line days, but have been using Ubuntu only about 2 months.
View 8 Replies View RelatedGeneral :: Emulator (Project64) - Display Size 800X600
Apr 26, 2011So I installed Project64 (For those who don't know it is a Nintendo 64 emulation program so I can get my Mario fix), Which I always read is hard to put on a Linux. I didn't think I had WINE so I ran $ whereis wine and I guess I do. But I never set a config for it, So I don't get how an install through wine would work. How was the .exe read?, Because I thought wine had to run to read those, and I don't think it ran. At least there was no visible sign when I installed.
||-2nd part-||
I got my Project64.exe, put it in a directory I made, did the $ ch commands to change permission , did $cd <dir> then I ran ./Directory:$ Project.64.exe 'gamefile.z64' and it seems to work fine. Except for it leaves the display as 800X600 after I close it. Why is it changing display size, and not returning to my default and can I make it stop doing it?
Debian :: Driver - Screen Can't Expand To The Full Size Of The Display
Feb 26, 2010Mobo - Asus M4A78T-E
CPU - Phenom II X4 955
RAM - DDR3 1333 dualchannel 8G
Display - Samsung 2494
Debian 504 64bit
Where can I download respective drivers. Linux drivers coming with the mobo can't work. There is no driver for Linux on the CD coming with the display. Fonts becomes very large even selecting "8". The screen can't expand to the full size of the display.
Ubuntu Multimedia :: Windows Display Larger Than The Available Screen Size
Sep 1, 2011In Ubuntu 11.04, all windows display larger than the available screen size, and I haven't found a way to make them fit within the display area of the monitor. This is a Dell 19" flat screen monitor, and I've tried changing the display; no matter what resolution is selected, the windows all bleed past the screen.
View 5 Replies View RelatedGeneral :: Display True File Size Using Ls -l Command In CentOS
Apr 19, 2011I am trying to figure out the actual size of files and directories on a CentOS Linux 5 server and when I do a ls -l I see for example at the Directory of /Data 4096 but once in side the directory and I do a ls -l I see larger file sizes. How do I get the actual file size of a Directory to show up?
View 3 Replies View RelatedGeneral :: Finding (HTML) File Size To Display In Summary
Dec 7, 2009Need to find the size of a file (html), and display it in a summary file. (Have tried du, ls, size, but none of these work).
View 6 Replies View RelatedGeneral :: Video Display Size - Unable To View Many MP4 Videos
Apr 2, 2010Since reinstalling Ubu9.04 from disk, I'm unable to view many MP4 videos.
My laptop only has 3 settings for res.
Here's some lshw:
And some attempt at adding a higher value in xorg.conf:
Server :: Display All Databases And Their Size Using Command Lines In Mysql?
Aug 7, 2010how can I display all databases and their size using command lines (linux) in a mysql server?
View 3 Replies View RelatedUbuntu :: Unity & Netbook Display Size - Applications Are Oversized For The 1024 X 600
Apr 26, 2011I upgraded to 11.04 about 10 days ago. I have this intermittently weird problem where some of the applications, some of the time, are oversized for the 1024 x 600 display. I can't get to the buttons on the bottom end of the screen, and the window refuses to decrease in size enough so that it all fits on. So far, I've had this problem with Evolution, Pytrainer, Gimp, and another one that escapes my memory.
Has anyone else had this issue? (Except for the Evolution bug, which has been around since 2005 or thereabouts. How on earth is that thing still the default when nobody bothers to fix it up?) how to a workaround? Heck, I don't even know where to go to report this kind of bug.
Ubuntu :: Display Size On TV - Shrunk And Has A Lot Of Unused Space On The Sides/top/bottom
Sep 28, 2010I am running 10.04 Lucid on a Toshiba Satellite A105. The onboard video is an Intel Graphics Media Accelerator 950. The issue is that when I connect it to my Panasonic widescreen TV (laptop is widescreen as well) the display is shrunk and has a lot of unused space on the sides/top/bottom. So like, if I wanna watch something from Hulu, I plug in the S-Video, and I can watch on the TV, but it's not using all the screen available... I have not found a way to resize the output so it fills the screen.
View 6 Replies View RelatedFedora :: Setting Display Size (No Scrolling To View Screen Contents)
Nov 20, 2008I am running Fedora 9 in virtual box on laptop. Want to set Fedora display size so that I will not have to scroll up or down or sideways to view screen contents. Have tried a couple of options such a resize box and change from full size but these do not help reduce size of Fedora display. Am wondering if it as something to do with the rectangular size of laptop monitor???
View 5 Replies View RelatedDebian Configuration :: Display Size Wrongly Detected After Installing NVIDIA Driver
May 17, 2010Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
General :: Virtualized Screen Resolution - Use A Larger Size Display That Is Configured By Default
Apr 18, 2010I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04.
The problem is that I would like to use a larger size display that is configured by default.
Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080.
This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation.
The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file.
I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily.
OpenSUSE :: 11.4 Gnome 2.3 Display - CRTC Error That The Display Is Over The Maximum - 1920x1920
Apr 16, 2011I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
Ubuntu Installation :: Display Error Notification 'Could Not Apply The Stored Configuration For Monitors X Server Does Not Support Size Requested' On Bootup
May 8, 2010Since upgrading to Lucid, I am getting the following dialog warning on login: 'Could not apply the stored configuration for monitors X Server does not support size requested' Im using the current proprietary NVIDIA graphics driver with dual heads. My display is fine, but the warning every time I login is annoying. After googling around I found this thread: [URL]. I tried going to Monitor Preferences as suggested. My resolution as displayed in the default tool is set to 3840 x 1200, which I suspect is the issue forcing the dialog, but I cant change the resolution, refresh rate or rotation from the Monitor Preference dialog box. dino99's response (in the referenced post) about xorg.conf not being needed anymore seems relevant. How can I resolve this issue and get rid of this annoying warning? Is there a configuration that I can update with a supported resolution to placate lucid?
View 9 Replies View RelatedUbuntu :: Get Xsane To Scan A Document And Have It Display As A Full 8.5x11 Sized Document Instead Of Something Half That Size?
Mar 13, 2010how to get xsane to scan a document and have it display as a full 8.5x11 sized document instead of something half that size? I've been trying and trying and can't seem to figure it out.
View 3 Replies View RelatedGeneral :: Command "ls" Display The Directory Size Of ZERO ?
Jun 3, 2010I have learned Linux for a while now, but Linux is continuously surprising me with new stuffs nearly every day... Today I met a really strange problem, that the command "ls" indicates the size of some directories is ZERO, as for /home.
However, there is a directory inside /home, which contains many files/directories.
Even worst, when I tried to create a file under /home, I got the "permission denied" error,
By the way, /home is within the local file system, not NFS share.
OpenSUSE :: Opensuse 11.4/gnome - Most Gui Apps Not Working With Gtk Error - Cannot Open Display: ::1:1.0
Jun 22, 2011I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
Hardware :: Partition Size Detected By Testdisk Bigger Than Disk Size
Mar 17, 2011a client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.
I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?
Software :: Xsane Reduces Size Of Image Of Scanned Page - How To Get Back To Full Size?
Nov 12, 2010Ubuntu 10.04, xsane 0.996, Brother MFC 240c scanner.I just finished writing a long dissertation on my problem with this scanning environment (which I will spare you). In a nutshell the resulting image, when printed, is smaller than the original document. In writing my dissertation for this post I determined that the cause of the issue is that xsane believes I am scanning an 8.5 x 14 inch document when I am in fact scanning an 8.5 x 11 letter. So the question is... can I change the size to 8.5 x 11? and if so, how? I have not found anything in the xsane Preferences.
View 7 Replies View RelatedDebian Multimedia :: How To Change Icons Size And Gaps Size
Oct 22, 2015today I upgraded via official testing repository Gnome to version 3.18. After this, icons on desktop and nautilus are bigger, than before. Next thing, gaps between icons are smaller than before. I tried change theme to default (Adwaita), then run gtk-update-icon-cache, but without result.
Normal view - icons are big for this view. URL....
Small view - icons are still big for this view. URL...
How can I change icons size and gaps size? Or is it bug for this version?