General :: Driver For A ATI Technologies Inc 3D RAGE PRO AGP

Jun 3, 2011

I am looking for a driver down load for ATI Technologies INC 3D RAGE PRO AGP. I really need the driver for pc.

View 2 Replies


ADVERTISEMENT

Ubuntu :: Ati Rage 128 Pro Driver

Dec 4, 2010

I have a machine dell optiplex gx240 quite old machine but great for being my secondary machine and running ubuntu on it however i cannot find a graphic driver? its an ati rage 128 pro , 32mb ram graphic card! i have a 21,5 inch monitor with a native 1920x1080 i know its a lot but it actualy works just no effects are available and some lag occurs! i have been googling for few hours cant come up with a solution! i did find this but dont know what to do with it :[url]

View 9 Replies View Related

Ubuntu Multimedia :: ADS Technologies Inc. DVD Xpress B Driver Is Disconitnued?

May 23, 2010

I have a ADS Technologies, Inc. DVD Xpress B see here and here. The product is disconitnued and followed by the DX2. Both devices have identical specs and everything. So I was hoping I could get ubuntu to work with it. So I tried using this driver.

It doesn't work so far. I tried changing the device usb info in the source so it includes this older device, but it doesn't work.

View 3 Replies View Related

General :: Assistive Technologies Icon Turn It Off?

Sep 22, 2010

I used the Assistive Technologies on screen keyboard because hotplug was not working and I could only use my bluetooth mouse. Now, even after disabling Assistive Technologies, the icon still appears in the apps toolbar, next to my network connection status icon and battery status icon, also next to the clock and date.

View 2 Replies View Related

General :: Pulseaudio / ATI Technologies Inc RV710/730 No Card Detected

Jan 18, 2011

I have installed arch linux and try to do pulseaudio according to wiki. But pulseaudio doesn't detect my sound card. I don't have alsa installed. I run

Code:

pacmd list

and it shows that no card is available. Commands

Code:

$ fuser -v /dev/snd/*
$ fuser -v /dev/dsp

View 3 Replies View Related

OpenSUSE Hardware :: Proliant Rage Xl Drivers?

Feb 12, 2010

i can find this Hardware for Linux - Compaq Computer (by ATI Technologies) / Proliant Rage XL but where do i download these drivers?

View 2 Replies View Related

Ubuntu :: FPS Of 50-60 In Glx Gears ATI Rage XL - Very Slow And Only Changes The Frame Every Second

Apr 25, 2011

why I have a really bad FPS and how to fix it.

MY Setup:
Two 1Ghz Pentium III (Coppermine)
1GB Ram
8.9GB Hotswap HDD
In a Dell Poweredge 2550 (I think it doesn't say on the case)
Ubuntu 10.10 (Installed Via remote boot - Has gnome GUI, LAMP, Apache etc.)

I would like to play some games on this server to take advantage of the CPU's (the fastest I have) The Graphics card can display up to 1152x864 so It should be able to handle some 3d gaming but it I try to play tux racer it is very slow and only changes the frame every second, must be very low FPS also glxgears gives me in-between 50 and 60 fps and most people seem to get 500+!

The problem is not compiz because it is no-longer installed and I think I am using the open-source ati drivers not fglx.

View 9 Replies View Related

Fedora Hardware :: ATI Rage 128 PF / PRO - Can't Get The Screen Resolution To Go Higher Than 848x480

Jan 9, 2011

I've recently been messing with installing Fedora 14 an older computer I have and I've hit a snag. While everything else seems to be just honky dory, I cant get the screen resolution to go higher than 848x480. I know that the screen I'm using supports at least 1024x768 (possibly higher, i don't know) as another computer I have will display at that on it with no problem.

I've spent literally hours mucking about with xrandr, and xorg.conf (had to create it cause it didn't exist)As an addendum: the GUI monitor preferences screen says "Unknown" for the monitor I'm using, where as the xorg.conf file i created accurately detects it as Vendor "NEC" ModelName "PX-50VP" That's not really a big deal though, just a minor quirk I would think.

View 3 Replies View Related

Ubuntu Networking :: VIA Technologies USB Wireless LAN Adapter

Jul 18, 2011

Currently booting off a disc and I'm unable to connect to our home network. Do I need to update drivers for this particular card? The netbook I'm using is a 'Kogan' with an Atom N270 1.6Ghz processor.

View 9 Replies View Related

Hardware :: Failed To Start X Server - ATI Technologies ES1000

Jan 11, 2011

There is a nice server that I want to install Redhat 5, update 5 on. I downloaded, from Oracle edelivery, the Linux 64 bit, Redhat 5, Update 5, and wrote it to bootable CD.

"V20658-01.zip","611558646","0C35737CD35BC26C212D205DF064CE2A","D0C7EF7CFF9635FECFDDB6BB724B1523851C1733","O racle Linux Release 5 Update 5 for x86_64 (64 Bit) - CD 1 of 6" and the other 6 CDs. However, when I went to test the install, I saw the messages:

Probing for video card: ATI Technologies ES1000
Failed to start X server.
Attempting to start VESA X. Failed.

[code]....

This is very odd, for a few reasons:

- the card is a few years old, and the distribution is new.

- Windows finds the correct information for this card, that it is an Nvidea card.

- A different simpler card gave the same error message (NVidea GEForce 6800)

View 7 Replies View Related

Debian Hardware :: ATI Radeon 9550 Intermitant / ATI Technologies, Starnberg, Taints Kernel?

Jan 22, 2010

i have a intermitant problem with my ATI radeo 9550 .fgl_glxgears work once on two .

When it don't work in the kernel log I find :

Jan 20 20:14:43 debian64 kernel: [ 18.852383] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jan 20 20:14:43 debian64 kernel: [ 18.882455] [fglrx] Maximum main memory to use for locked dma buffers: 1343 MBytes.
code....

View 2 Replies View Related

Hardware :: S-video VGA Compatible Controller - ATI Technologies Inc Radeon Mobility M7 LW - Radeon

May 24, 2009

I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.

This is how I got it to work.

I install Debian 5.0 Lenny Desktop

added the Driver "radeon" to my /etc/X11/xorg.conf file

This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.

View 2 Replies View Related

General :: Activate Wireless Network Card Driver And Video Driver?

Jul 20, 2010

I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?

Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.

View 9 Replies View Related

General :: Difference Between Platform Driver And Ordinary Driver?

Jul 14, 2011

I am not understanding the difference between the platform driver and the regular driver. How they differ and when to prefer each of this driver.

View 1 Replies View Related

General :: Uninstall Print Driver To Assure Use Of New Driver?

Jun 21, 2011

I would like to know whether an updated print driver has successfully replaced a previously installed driver.

I have a late model Lexmark Prestige Pro805 printer. Lexmark supplies a Linux driver which you download. No drivers appear on the Ubuntu Add Printer list. The Lexmark download also installs utilities, etc. Some stuff appears installed in synaptic. I don't know if uninstalling these only uninstalls the applications and not the actual driver. For some reason, I have had issues recently with this printer malfunctioning frequently with my Linux machines over wifi. They have pushed new firmware down to the printer, and this may be a cause. There is also newer Linux print drivers which I installed, but I do not have a clue as to whether the new drivers are actually in use. On a windows machine I would have uninstalled the printer prior to re-installation. Clueless how to accomplish the same on Ubuntu.

How do I make sure the newest drivers are in use?

View 1 Replies View Related

OpenSUSE Hardware :: Free Mesa Driver Is Alot Faster Than The ATI Propietary Driver?

Dec 17, 2009

Is it normal that the free Mesa driver is alot faster than the ATI propietary driver?, at least for desktop usage. That is, using both latest drivers, 9.11 and 7.7

View 3 Replies View Related

OpenSUSE Hardware :: How To Clear Proprietary NVidia Driver And Replace With Nouveau Driver

Jun 13, 2011

There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.

Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.

View 9 Replies View Related

Ubuntu Networking :: Mobile Broadband Driver And Wireless Driver Disable After Rebooting 9.04!?

Jun 21, 2010

It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.

View 1 Replies View Related

Ubuntu Networking :: Uninstall/Remove Old Wireless Driver To Make Way For New Driver - RTL8191SE?

Jun 21, 2010

How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?

Here's the new driver:

I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.

View 2 Replies View Related

CentOS 5 Hardware :: Driver For Ich8 Serial Ata Storage Controller 2820 Driver

Feb 17, 2010

I am attempting to load CentOS 5 on an Acer 6900 desktop and I'm not even getting out of the starting gate. I am familiar with using linux but not the install procedure which is why I am beginning to dive into this. However, when I bring the system up off the Linux boot disk and go to install it's not even giving me the option of the controller so I can begin installing the os from the dvd-rom. This is what acer lists as the controller for the 6900: ich8 serial ata storage controller 2820 linux driver. I cannot find this driver for linux anywhere.

View 10 Replies View Related

Fedora :: Load A Print Driver And Network Driver For An MX860 Printer?

Apr 15, 2010

This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?

[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$

View 14 Replies View Related

Ubuntu :: Nvidia Driver Install Killed Display / Remove This Driver When I See Nothing?

Aug 8, 2010

Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?

View 2 Replies View Related

Ubuntu :: Change The Running Driver From Vesa To The Correct Intel Driver?

Oct 1, 2010

I have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.

View 2 Replies View Related

CentOS 5 Hardware :: Intel Graphics Driver Driver Upgrading 5.4 To 5.5 I386?

May 16, 2010

i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....

and i solved the black screen problem changing the driver for i810

Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection

View 2 Replies View Related

Debian Multimedia :: Updating Nvidia Driver To The Current 275.09.07 Driver Version Break Setup?

Jul 7, 2011

Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?

View 3 Replies View Related

OpenSUSE Wireless :: RTL8191SE Driver On Compaq Presario CQ62 Doesn't Work With XP Driver

Oct 23, 2010

No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.

However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.

I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.

View 6 Replies View Related

Hardware :: USB Generic Serial Driver, And FTDI Single Port Driver As A Module, But It Still Isn't Getting Recognized?

Feb 4, 2011

My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?

View 5 Replies View Related

Debian Hardware :: Unistall Fglrx And Vga Driver And Restore Without Vga Driver?

Jan 12, 2011

How unistall fglrx and vga driver and restore to debian with out vga driver.like new debian with new install.

View 2 Replies View Related

OpenSUSE Hardware :: Using The Nouveu Driver Or The Nvidia Binary Driver?

Mar 12, 2011

How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:

Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]

[Code]...

View 2 Replies View Related

Ubuntu Networking :: How To Install A Driver A Wifi Reltak Driver

May 13, 2010

I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved