General :: Copy Bootable System Compact Flash To SD Card?
Aug 24, 2011I have a bootable Linux compact flash card and want to copy it to an SD card. What would be the easiest way to do this?
View 2 Replies
ADVERTISEMENT
General :: Making A Live CD Bootable From Compact Flash (CF)?
Jun 16, 2011Making a live CD using tools such as livecd-creator seems like a good solution to create a bootable read-only image to install on Compact Flash. My goal is to prevent failure due to write cycle limits of Compact Flash memory. A secondary goal is to have the live CD available for troubleshooting. However, Usenet postings indicate challenges in making the live CD image on CF bootable. Has anyone succeeded in doing this?
View 3 Replies View RelatedGeneral :: Making A Bootable Partition On A Compact Flash?
May 4, 2011I have never worked with Linux before but as part of my new job I need to format and install a program on a compact flash card. I have followed our procedure to the T but when i install the card I get a No bootable partition error. Here is what I'm doing. I go into Gnome terminal and change to my directory to "cd dcmsetupdir" (this may not be important but I want to give as much info as I can. Then I type "sudo ./format_cf". once this is complete (no errors detected), I type in "sudo ./install_cf" this seems to install correctly but when I boot up the unit with the card in I get the no bootable partition error.
View 7 Replies View RelatedUbuntu Installation :: Trying To Install To Compact Flash Card?
Feb 8, 2010I'm trying to install Ubuntu 9.10 to a Compact Flash card. It's not going very well. I have a 4GB USB drive that I want to install from. I can boot from this USB drive and get into either Ubuntu itself or the installation program only. Either way, I've tried to install it.
My Sandisk Extreme IV 4GB 45MB/s compact flash card is detected in my BIOS and shows up during the installation as well. Whenever I try to finalize and start the installation it gets to 15% and then gives an error on how it can't mount the file system.
I've tried every file system available. Funny thing is, I can use gparted to format the card to ext2. It then shows up on the desktop as a drive. If I go into that drive, there's a folder called lost+found. If I try to enter that folder it complains about permissions.
Is there any special trick to installing onto a compact flash card? I've tried with every file system available, with and without a swap file partition as well. I have quite scarce experience with Ubuntu and Linux in general so this is incredibly hard. But I wont give up that easily!
Second thought: If I can't get this working, would it be just as OK to run it as a "live" distro on the CF card? The motherboard is an Intel D945GSEJT. Using 1 gig ram.
Debian :: OS Running On Compact Flash Card - Files Appear To Be Corrupt?
Sep 30, 2009I have a system with Voyage-Linux (Debian based) as my OS running on a compact flash card. Some files appear to be corrupt on it. Whenever I do a ls,cp,mv,rm command on these files I get the message Stale NFS file handle. I actually had the problem on 2 identical systems. I fixed the first one by attaching the CF card to another linux system and then running e2fsck -f -v /dev/sdb1. It got rid of the bad file.
My problem is I won't be able to do that all the time. I'm gonna have several of these systems in different places and won't have direct access to them, therefore I'm looking for a solution that would work on the system itself. Now running e2fsck on a mounted filesystem seems to be a bad idea from what I read, but I tried anyway and it did not get rid of the file. I tried running tune2fs -c 1 /dev/hda1 and rebooting, which is supposed to run e2fsck after the next boot (not 100% sure here) but that didn't seem to work.
General :: Copy Directory Files To Bootable Flash Device?
Jul 26, 2011copy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.
- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.
- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.
- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?
My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.
Hardware :: Using A Compact Flash Card As A Hard Drive Improve Battery Life?
Aug 30, 2010I am wanting to replace the hard drive on my laptop with a Compact Flash Card. I bought a card and a adapter, but I am seeing that there are a lot of downsides to this (e.g. the card is slower, writes should be conserved because of limited write cycles, etc..) plus, in order to change the hard drive in my laptop (ibook g3 clamshell) you literally have to disassemble the entire thing! I mainly wanted to do this project to increase my battery life. However, some people say that it doesn't make much of a difference, while others say it is wonderful. So, to those that have done this mod, how much of a difference did it make for you?
View 1 Replies View RelatedGeneral :: Clone Or Copy Entire System To External Bootable HD?
Sep 5, 2010I have a 16GB Ubuntu Webserver running on a Transcend SMART CF chip (Yes I know all the reasons not to). I want to move that entire system (OS, Files and structure) to an external bootable HD that will probably be closer to 100GB. What's the easiest way to do this and have it be plug and play. By which I mean I can then plug the drive into a new system and boot it up just as it was running on the old system.
View 1 Replies View RelatedGeneral :: Bootable USB Flash - How To Create A Files System
Oct 20, 2010I need to make a bootable USB stick.
1) How to format it with ext3
2) How to make a master boot record
3) How to create a files system
4) How to put syslinux, syslinux.cfg and a real kernel on the stick
General :: Embedded Webserver (mysql) On A Compact Flash: Reduce Read / Write Operations?
Jul 7, 2011I've developed a tiny webserver for home automation out of an ALIX 1D, and based on a debian lenny. It runs very smoothly and is now able to operate quite a lot of different equipment from a webapp. But i'm not sure how I should handle the compact flash, regarding read/write limitations. From what I've read the partitioning should be ext2, which would disallow the journalisation of the system. A utility to 'flatten' the repartition of write cycles exists, would it be relevant to use if the partition is ext2 ?
I will also disable all logging in execution mode (a debug mode will provide the logs). Is there any other parameters I have to take into account for maximum reliability (i.e. does the system randomly write in some files for various and potentially turned off purposes)? As for the mysql database, it's not important data, and it's actually reconstructed every time the server boots. Given this, is there a way to store the db in RAM rather than in a file? I'm not sure it's the right place to ask, but I sometimes see redirection to here from stack overflow.
Ubuntu :: Use Compact Flash As A Drive ?
May 29, 2010I have a project were I have been trying to use Compact Flash (CF Card) was a Ubuntu system drive, but can't seem to successful partition it. I can partition without error, but I go back into the partition tool it gives usually a cryptic error about the partitions. They won't format either. For example Gparted puts orange triangles next to each partition. cfdisk says partition exceeds cylinder boundary. I've tried three different computer, two different CF to IDE adapters (a laptop and desktop type) and four different models/brands of CF cards all are supposed to fixed disk IDE compatible. My theory is the drive geometry is not being detected correctly, or maybe a sector alignment issue. I've tried GUID partitions too and it doesn't help. How do I correctly partition a CF card?
View 2 Replies View RelatedUbuntu Installation :: Copying System Onto Bootable CF Card?
Feb 5, 2010I am running 8.10 desktop on an MSI Wind desktop. Everything is on the single 500GB hard drive. I also have a 4GB CompactFlash card in the system that has a working version of 8.04 desktop on it. I would like remove 8.04 from the CF card and copy/clone the currently configured 8.10 onto it as a backup just in case I accidentally trash the 8.10 installation on the HDD some time. I'd also like to be able to update the CF backup easily periodically to keep it current with the setup running off the HDD.
The HDD is partitioned as follows.
Code:
ken@pinot:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb2 9843308 800448 8542840 9% /
tmpfs 1032220 0 1032220 0% /lib/init/rw
[Code].....
Debian :: Format The Target Device ( A 4G Compact Flash )?
Oct 8, 2010I need to install an aplication to several machines. The aplication runs on a Debian and the installation process is done with a usb. I'm using a plop live usb to perform the installation. I've seen that with plop , once the live system is on, i can run some scripts.
What I'm trying to do is:
->format the target device (a 4G compact flash).
->mount the formatted device.
->untar my debian.tar.gz in that device.
After rebooting, the system never boots.
Using a live CD and invoking "fdisk -lu" :
[Code]...
Debian :: Copy A Bootable CD To A Bootable Partition?
May 11, 2010How can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies View RelatedSoftware :: If I Dd Copy A Bootable Usb Drive To An Iso Will The Iso Be Bootable
Mar 23, 2011If I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
Ubuntu :: Compact Flash Limited To 1024 Files In Nautilus?
Sep 26, 2010I just got an 8 gig compact flash card for my SLR camera. When I open the card (using a card reader) in Nautilus (Ubuntu 10.04) it will only list about 1024 files and not the rest. It does not provide any warnings so one could easily think all files have been copied when in fact they haven't. This could be a real issue if the user does not notice. Using another app called rapid photo downloader in Ubuntu does not seem to list/preview all the files either. I dual boot to win xp 32 bit and I can see all the photos and can copy them to the harddrive without any issues so I don't think it is hardware related. How to get Nautilus to allow the copy of all files?
View 4 Replies View RelatedGeneral :: Can't Just Copy A Bootable CD To USB Drive And Boot From It
Aug 15, 2011I would like to understand the following:
I have a Debian installation CD that I can boot from. Now I copied that to an USB-stick using dd
dd if=/dev/sr0 of=/dev/sdc bs=1M
The CD-image should contain a boot-sector and everything else that is needed for booting, yet the USB stick does not boot.
What am I missing - why does the stick not boot?
PS: I am not interested in tips on how to create a bootable stick, I only want to understand why the above method does not work.
OpenSUSE Network :: Error When Mounting Remote Cifs/samba Compact Flash?
Jan 3, 2010Am in the process of upgrading from an ancient OpenSuSE release (7.2) to 11.2. One thing I have been unable to do that worked fine under 7.2 is remotely mounting a compact flash drive from an XP machine. Worked fine for many moons on 7.2:
# mount -t cifs -o rw //xpbox/'cf (H)' /cf0
I get:
mount error(12): Cannot allocate memory
Other cifs mounts of hard disks work fine.
I found a posting that says this means the memory allocation error is from the XP side. It says to fiddle with the XP registry, specifically IRPStackSize. I was not confident this fix would work since there should not be anything significantly more consuming with 11.2 compared to 7.2, and indeed, I got the same error after changing the parameter to 18 and rebooting the XP machine. Any ideas? I have some suspicion that the space and parenthesis in the share name might be fouling up someone. XP forces the share name to this for some reason.
Ubuntu Installation :: Toshiba Portege 3480ct Compact Flash Install Error
Apr 5, 2011I'm trying to install hardy on a portege 3480. I have connected via USB caddy and run it via a lynx build desktop and installed hardy via unetbootin onto the 8gb CF. the machine then boots to the menu where you chan choose live, memtest etc. on choosing the live option to boot the machine up it then bombs out with a error. " menu.c32: not a com32R image Boot:"
it gets this far, so its not far off, but i'm stumped as where to go next
i have read that tftpd is a possibility to get this running but have run into issues setting it up hence looking at removing the CF out for a unetbootin style install.
Ubuntu :: Copy A Windows Operating System Dvd To A Usb Flash Drive?
May 2, 2011I want to copy a windows operating system dvd to a usb flash drive. (I want the flash drive to be bootable under windows).
View 2 Replies View RelatedGeneral :: USB Flash Boot Copy To Another USB Flash
Sep 3, 2010I have a USB flash drive, which is bootable and I would like to copy the whole drive to a different drive.Can I just do a low level dd copy between both USB memory drives, or do I need to make an ISO of the source, and then put that ISO on the destination? I figured I could ask in less time than trying, and exhaustively testing to make sure I had it right...
View 2 Replies View RelatedGeneral :: Make A Bootable USB Flash Drive That Can Run Memtest?
May 25, 2010It seems that the canonical instructions for making a bootable USB flash drive that runs memtest are at:
[URL]
However, after following them to a T, I boot up the new machine and get:
"could not find kernel image: linux"
Do I need to set up a lilo.conf first?
General :: Ext2 Or Ext4 For Bootable USB Flash-drive?
Jan 26, 2011I want to install Ubuntu to a USB Flash drive (so I have my Desktop everywhere and can customize it as I want). I'm still choosing what's the best filesystem for the USB; Ext2 with no journaling or Ext4 with journaling but performance increase? I know that journaling will probably reduce the life of the USB flash drive dramatically, so is Ext2 the obvious choice? Or is it a bad idea to install Linux (Ubuntu probably) on a USB Flash drive? I tried running a live CD from the USB drive, but it wasn't very customizable - which is the point of carrying my OS with me.
View 3 Replies View RelatedGeneral :: Make A Bootable USB Flash Drive Manually?
Jan 28, 2011I would like to boot Ubuntu 8.04 i386 from my USB flash drive. [URL] I took following steps:
1) made sure that usb_storage.ko kernel module is loaded
Code:
root@martin-desktop:~# lsmod | grep -i storage
usb_storage 39585 1
root@martin-desktop:~#
2) inserted USB flash drive
Code:
root@martin-desktop:~# tail -n0 -f /var/log/messages
Jan 29 01:43:23 martin-desktop kernel: [440650.637531] usb 2-2: new high speed USB device using ehci_hcd and address 8
Jan 29 01:43:23 martin-desktop kernel: [440650.776107] usb 2-2: configuration #1 chosen from 1 choice
[code].....
When I set "USB flash drive" as a first bootable device in BIOS, I get SYSLINUX "boot:" prompt and it loads both "vmlinuz" and "initrd.gz", but finally I end up in BusyBox prompt and following message:
Quote:
"Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! does not exist. Dropping to a shell!"
Last boot message which I see is "Attached scsi generic sg2 type 0".what might cause such behavior? Did I miss anything while preparing USB flash drive?
General :: Making SD Card Bootable?
Aug 24, 2010Earlier today I created a bootable USB stick by executing a script file that came with the distro for that purpose and experienced no problems. Later on, I tried exactly the same thing but using a SD card via a USB adaptor and it didn't work. Is there some difference in geometry between these two media types that could cause this problem?
View 5 Replies View RelatedGeneral :: Making Bootable USB Flash Drive To Install Fedora 14
Jun 30, 2011I have an Intel Core2 Duo system that I want to upgrade from Fedora 12 to Fedora 14. I have downloaded the DVD iso for Fedora 14, however, I do not want to burn a DVD for installation, and would like to be able to perform the upgrade from a USB flash drive. Where can I find information that will explain how to make a bootable flash drive that can install Fedora 14?
View 14 Replies View RelatedGeneral :: Check If A SD Card Is Bootable With Extlinux?
Jun 17, 2011I installed different linux distros on a SD card (for travelling).How can I check if this SD card will be bootable? (my old PC dont boot via SD/USB, so I cannot verify is everything is correctly installed and cannot verify if the SD card on an USB adapter would run). I am travelling next sunday from Germany to Ireland and will have access to PCs which are bootable via USB; I would like to test it till Sunday).
View 9 Replies View RelatedGeneral :: Ubuntu 9.10 - Move Existing Installation To Usb-flash And Make It Bootable?
Apr 20, 2010Is there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.
View 2 Replies View RelatedGeneral :: Copy Root Filesystem From RAM To Flash?
Jun 7, 2011I boot up a Linux appliance entirely in RAM, ie. the image has a Linux kernel and an attached ext2 root filesystem.
Now that it's working, I would like to copy the root filesystem from RAM to a NAND flash memory.
Can I just mount the NAND, run "cp -a /* /mnt/nand", reboot with the kernel command line "root=/dev/mtdblock2 rw", and expect Linux to be happy... or is it more involved than this?
Ubuntu :: Make The New Copy Bootable?
Feb 8, 2011i want to copy an ubuntu system from one computer to another using netcat / tar. What directories should i exclude? also how do i make the new copy bootable?
View 1 Replies View Related
