General :: Making A Live CD Bootable From Compact Flash (CF)?

Jun 16, 2011

Making a live CD using tools such as livecd-creator seems like a good solution to create a bootable read-only image to install on Compact Flash. My goal is to prevent failure due to write cycle limits of Compact Flash memory. A secondary goal is to have the live CD available for troubleshooting. However, Usenet postings indicate challenges in making the live CD image on CF bootable. Has anyone succeeded in doing this?

View 3 Replies


ADVERTISEMENT

General :: Making A Bootable Partition On A Compact Flash?

May 4, 2011

I have never worked with Linux before but as part of my new job I need to format and install a program on a compact flash card. I have followed our procedure to the T but when i install the card I get a No bootable partition error. Here is what I'm doing. I go into Gnome terminal and change to my directory to "cd dcmsetupdir" (this may not be important but I want to give as much info as I can. Then I type "sudo ./format_cf". once this is complete (no errors detected), I type in "sudo ./install_cf" this seems to install correctly but when I boot up the unit with the card in I get the no bootable partition error.

View 7 Replies View Related

General :: Copy Bootable System Compact Flash To SD Card?

Aug 24, 2011

I have a bootable Linux compact flash card and want to copy it to an SD card. What would be the easiest way to do this?

View 2 Replies View Related

General :: Making Bootable USB Flash Drive To Install Fedora 14

Jun 30, 2011

I have an Intel Core2 Duo system that I want to upgrade from Fedora 12 to Fedora 14. I have downloaded the DVD iso for Fedora 14, however, I do not want to burn a DVD for installation, and would like to be able to perform the upgrade from a USB flash drive. Where can I find information that will explain how to make a bootable flash drive that can install Fedora 14?

View 14 Replies View Related

General :: Embedded Webserver (mysql) On A Compact Flash: Reduce Read / Write Operations?

Jul 7, 2011

I've developed a tiny webserver for home automation out of an ALIX 1D, and based on a debian lenny. It runs very smoothly and is now able to operate quite a lot of different equipment from a webapp. But i'm not sure how I should handle the compact flash, regarding read/write limitations. From what I've read the partitioning should be ext2, which would disallow the journalisation of the system. A utility to 'flatten' the repartition of write cycles exists, would it be relevant to use if the partition is ext2 ?

I will also disable all logging in execution mode (a debug mode will provide the logs). Is there any other parameters I have to take into account for maximum reliability (i.e. does the system randomly write in some files for various and potentially turned off purposes)? As for the mysql database, it's not important data, and it's actually reconstructed every time the server boots. Given this, is there a way to store the db in RAM rather than in a file? I'm not sure it's the right place to ask, but I sometimes see redirection to here from stack overflow.

View 2 Replies View Related

Slackware :: Making A USB Stick Bootable From A Bootable Cdrom?

Oct 23, 2009

I have a cdrom (bootable) that I want to copy over to a usb stick, and have THAT boot the system (Adding other files to it before hand) I know it's easy, but how? I've already made a iso of the cdrom.

View 2 Replies View Related

General :: Making SD Card Bootable?

Aug 24, 2010

Earlier today I created a bootable USB stick by executing a script file that came with the distro for that purpose and experienced no problems. Later on, I tried exactly the same thing but using a SD card via a USB adaptor and it didn't work. Is there some difference in geometry between these two media types that could cause this problem?

View 5 Replies View Related

General :: Making USB Disk Bootable On Key?

Jun 22, 2011

How to make a usb disk on key bootable?

View 3 Replies View Related

General :: Making Bootable Usb Stick For Clonezilla?

May 6, 2010

One of my computers is a netbook with no CD drive, so I need to create a bootable USB stick so I can reload a Clonezilla-made backup image from an external HD on to the netbook.I bought a 4Gb thumb drive and used Parted Magic to create a 200Mb partition on it. I formatted this and the remaining free space both as FAT32 and used Parted Magic to flag the small partition as bootable. Then I loaded the Clonezilla Live files onto this boot partition.Now the thumb drive boots up ok, but goes straight into a Parted Magic menu screen from which there is no way out! It's just the menu screen alone and has no PM functionality. This also happens on other systems where there is no PM installed or in the CD drive. So it must be something PM has done to the thumb drive.

View 1 Replies View Related

General :: Making A Bootable Disk From ISO Images?

Jun 17, 2010

what is the procedure to make a bootable disk from ISO images downloaded from Red Hat Enterprise site?

View 8 Replies View Related

General :: Making A USB Stick Bootable RHEL5 From Iso?

Sep 4, 2010

I have RHEL5x86_64 iso,I have windows XP 64 bit OS installed and a 4 GB USB Stick and my optical drive is not working . I want to install RHEL5 on my system from the USB. I can do this in a linux system but unfortunately I have no linux system. How will I do it in windows, as I am not getting any correct application or correct procedure to do this ...

View 6 Replies View Related

Ubuntu :: Use Compact Flash As A Drive ?

May 29, 2010

I have a project were I have been trying to use Compact Flash (CF Card) was a Ubuntu system drive, but can't seem to successful partition it. I can partition without error, but I go back into the partition tool it gives usually a cryptic error about the partitions. They won't format either. For example Gparted puts orange triangles next to each partition. cfdisk says partition exceeds cylinder boundary. I've tried three different computer, two different CF to IDE adapters (a laptop and desktop type) and four different models/brands of CF cards all are supposed to fixed disk IDE compatible. My theory is the drive geometry is not being detected correctly, or maybe a sector alignment issue. I've tried GUID partitions too and it doesn't help. How do I correctly partition a CF card?

View 2 Replies View Related

General :: Software Recommend Program For Making A Bootable ISO File

Feb 26, 2011

I have Windows XP as an ISO file on a USB stick and want to make it bootable.Which Linux software do you recommend for doing that?

View 4 Replies View Related

Debian :: Format The Target Device ( A 4G Compact Flash )?

Oct 8, 2010

I need to install an aplication to several machines. The aplication runs on a Debian and the installation process is done with a usb. I'm using a plop live usb to perform the installation. I've seen that with plop , once the live system is on, i can run some scripts.

What I'm trying to do is:

->format the target device (a 4G compact flash).
->mount the formatted device.
->untar my debian.tar.gz in that device.
After rebooting, the system never boots.
Using a live CD and invoking "fdisk -lu" :

[Code]...

View 8 Replies View Related

Ubuntu Installation :: Trying To Install To Compact Flash Card?

Feb 8, 2010

I'm trying to install Ubuntu 9.10 to a Compact Flash card. It's not going very well. I have a 4GB USB drive that I want to install from. I can boot from this USB drive and get into either Ubuntu itself or the installation program only. Either way, I've tried to install it.

My Sandisk Extreme IV 4GB 45MB/s compact flash card is detected in my BIOS and shows up during the installation as well. Whenever I try to finalize and start the installation it gets to 15% and then gives an error on how it can't mount the file system.

I've tried every file system available. Funny thing is, I can use gparted to format the card to ext2. It then shows up on the desktop as a drive. If I go into that drive, there's a folder called lost+found. If I try to enter that folder it complains about permissions.

Is there any special trick to installing onto a compact flash card? I've tried with every file system available, with and without a swap file partition as well. I have quite scarce experience with Ubuntu and Linux in general so this is incredibly hard. But I wont give up that easily!

Second thought: If I can't get this working, would it be just as OK to run it as a "live" distro on the CF card? The motherboard is an Intel D945GSEJT. Using 1 gig ram.

View 4 Replies View Related

Ubuntu :: Compact Flash Limited To 1024 Files In Nautilus?

Sep 26, 2010

I just got an 8 gig compact flash card for my SLR camera. When I open the card (using a card reader) in Nautilus (Ubuntu 10.04) it will only list about 1024 files and not the rest. It does not provide any warnings so one could easily think all files have been copied when in fact they haven't. This could be a real issue if the user does not notice. Using another app called rapid photo downloader in Ubuntu does not seem to list/preview all the files either. I dual boot to win xp 32 bit and I can see all the photos and can copy them to the harddrive without any issues so I don't think it is hardware related. How to get Nautilus to allow the copy of all files?

View 4 Replies View Related

Debian :: OS Running On Compact Flash Card - Files Appear To Be Corrupt?

Sep 30, 2009

I have a system with Voyage-Linux (Debian based) as my OS running on a compact flash card. Some files appear to be corrupt on it. Whenever I do a ls,cp,mv,rm command on these files I get the message Stale NFS file handle. I actually had the problem on 2 identical systems. I fixed the first one by attaching the CF card to another linux system and then running e2fsck -f -v /dev/sdb1. It got rid of the bad file.

My problem is I won't be able to do that all the time. I'm gonna have several of these systems in different places and won't have direct access to them, therefore I'm looking for a solution that would work on the system itself. Now running e2fsck on a mounted filesystem seems to be a bad idea from what I read, but I tried anyway and it did not get rid of the file. I tried running tune2fs -c 1 /dev/hda1 and rebooting, which is supposed to run e2fsck after the next boot (not 100% sure here) but that didn't seem to work.

View 2 Replies View Related

OpenSUSE Network :: Error When Mounting Remote Cifs/samba Compact Flash?

Jan 3, 2010

Am in the process of upgrading from an ancient OpenSuSE release (7.2) to 11.2. One thing I have been unable to do that worked fine under 7.2 is remotely mounting a compact flash drive from an XP machine. Worked fine for many moons on 7.2:

# mount -t cifs -o rw //xpbox/'cf (H)' /cf0
I get:
mount error(12): Cannot allocate memory
Other cifs mounts of hard disks work fine.

I found a posting that says this means the memory allocation error is from the XP side. It says to fiddle with the XP registry, specifically IRPStackSize. I was not confident this fix would work since there should not be anything significantly more consuming with 11.2 compared to 7.2, and indeed, I got the same error after changing the parameter to 18 and rebooting the XP machine. Any ideas? I have some suspicion that the space and parenthesis in the share name might be fouling up someone. XP forces the share name to this for some reason.

View 1 Replies View Related

Ubuntu Installation :: Toshiba Portege 3480ct Compact Flash Install Error

Apr 5, 2011

I'm trying to install hardy on a portege 3480. I have connected via USB caddy and run it via a lynx build desktop and installed hardy via unetbootin onto the 8gb CF. the machine then boots to the menu where you chan choose live, memtest etc. on choosing the live option to boot the machine up it then bombs out with a error. " menu.c32: not a com32R image Boot:"

it gets this far, so its not far off, but i'm stumped as where to go next

i have read that tftpd is a possibility to get this running but have run into issues setting it up hence looking at removing the CF out for a unetbootin style install.

View 9 Replies View Related

Hardware :: Using A Compact Flash Card As A Hard Drive Improve Battery Life?

Aug 30, 2010

I am wanting to replace the hard drive on my laptop with a Compact Flash Card. I bought a card and a adapter, but I am seeing that there are a lot of downsides to this (e.g. the card is slower, writes should be conserved because of limited write cycles, etc..) plus, in order to change the hard drive in my laptop (ibook g3 clamshell) you literally have to disassemble the entire thing! I mainly wanted to do this project to increase my battery life. However, some people say that it doesn't make much of a difference, while others say it is wonderful. So, to those that have done this mod, how much of a difference did it make for you?

View 1 Replies View Related

General :: Create Multi Bootable (with Menu) Cd / Dvd That Contains Number Of Live Cds?

Mar 4, 2010

How can I create a multi bootable (with menu) cd/dvd that contains a number of live cds? Is there any "easy" way of doing this? Isolinux is the way to go I guess, but is there any tool available for this?

View 2 Replies View Related

General :: Make A Bootable USB Flash Drive That Can Run Memtest?

May 25, 2010

It seems that the canonical instructions for making a bootable USB flash drive that runs memtest are at:

[URL]

However, after following them to a T, I boot up the new machine and get:

"could not find kernel image: linux"

Do I need to set up a lilo.conf first?

View 1 Replies View Related

General :: Ext2 Or Ext4 For Bootable USB Flash-drive?

Jan 26, 2011

I want to install Ubuntu to a USB Flash drive (so I have my Desktop everywhere and can customize it as I want). I'm still choosing what's the best filesystem for the USB; Ext2 with no journaling or Ext4 with journaling but performance increase? I know that journaling will probably reduce the life of the USB flash drive dramatically, so is Ext2 the obvious choice? Or is it a bad idea to install Linux (Ubuntu probably) on a USB Flash drive? I tried running a live CD from the USB drive, but it wasn't very customizable - which is the point of carrying my OS with me.

View 3 Replies View Related

General :: Make A Bootable USB Flash Drive Manually?

Jan 28, 2011

I would like to boot Ubuntu 8.04 i386 from my USB flash drive. [URL] I took following steps:

1) made sure that usb_storage.ko kernel module is loaded

Code:

root@martin-desktop:~# lsmod | grep -i storage
usb_storage 39585 1
root@martin-desktop:~#

2) inserted USB flash drive

Code:

root@martin-desktop:~# tail -n0 -f /var/log/messages
Jan 29 01:43:23 martin-desktop kernel: [440650.637531] usb 2-2: new high speed USB device using ehci_hcd and address 8
Jan 29 01:43:23 martin-desktop kernel: [440650.776107] usb 2-2: configuration #1 chosen from 1 choice

[code].....

When I set "USB flash drive" as a first bootable device in BIOS, I get SYSLINUX "boot:" prompt and it loads both "vmlinuz" and "initrd.gz", but finally I end up in BusyBox prompt and following message:

Quote:

"Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! does not exist. Dropping to a shell!"

Last boot message which I see is "Attached scsi generic sg2 type 0".what might cause such behavior? Did I miss anything while preparing USB flash drive?

View 19 Replies View Related

General :: Bootable USB Flash - How To Create A Files System

Oct 20, 2010

I need to make a bootable USB stick.

1) How to format it with ext3

2) How to make a master boot record

3) How to create a files system

4) How to put syslinux, syslinux.cfg and a real kernel on the stick

View 2 Replies View Related

General :: Copy Directory Files To Bootable Flash Device?

Jul 26, 2011

copy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.

- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.

- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.

- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?

My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.

View 7 Replies View Related

OpenSUSE :: Making A Bootable ISO From DVD For VirtualBox?

May 23, 2011

I started with a bootable Windows 7 Upgrade DVD. I tested the DVD by booting from DVD in a physical drive. The system put up a "press any key to install from CD/DVD" and it worked. Now, I attempted to make a bootable ISO for VirtualBox... To make the ISO, I used this:

dd if=/dev/sr0 of=windows7.iso bs=2048 conv=sync

which I've read will clone the DVD and its boot ability? Is this correct? When I start VirtualBox, version 4.0.8 r71778, I get the "FATAL: No bootable medium found! System halted." The IDE Primary Master (CD/DVD) is set to see windows7.iso, so I suspect it sees the ISO, only it doesn't appear to be bootable. SATA Port 0 is set to Windows 7.vdi. Am I missing a step somewhere? The system is running openSUSE 11.4.

View 9 Replies View Related

OpenSUSE Install :: Making An Os Bootable?

Mar 29, 2010

I got a hard drive with an image of an older redhat OS that i need to do some work with. The hard drive isnt bootable but i need to get into it somehow. I am not even close to an expert on these kinds of things, but i will provide the information that ive got.

fdisk -ul

Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 63 149838254 74919096 83 Linux
/dev/sda2 149838255 156296384 3229065 5 Extended

[Code]....

The simplest way the occurs to me to do this is to virtualize the OS on it. So i installed hypervisor from yast, but (i think) it requires an image of the OS to virtualize it, not some partitions on a hard drive. Is there an easy way around this?

View 4 Replies View Related

Ubuntu :: Making Bootable Usb Stick?

Aug 12, 2010

I'm trying to make a Windows bootable USB stick in ubuntu 10.4 remix (netbook one)

View 5 Replies View Related

Ubuntu :: Making A Bootable DVD From Non ISO File?

May 22, 2011

for some reason copied my recovery disk directly as a file to file copy and not creating a ISO image. So thats all I have, a non ISO image and I need to burn it on a DVD to make it bootable. nothing I have tried seems to work. I know K3B has some options but I dont know it so well.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved