General :: Cannot Print Envelopes With LibreOffice Writer - HP LaserJet 5M

Jun 21, 2011

I'm running Kubuntu 11.04 and LibreOffice Writer 3.3.2. I'm trying to print a #10 envelope on an HP LaserJet 5M printer. When I create the envelope and attempt to print it, LIbreOffice sets the paper size to #10 Envelope, as it should. I put the envelope into the manual feed tray and initiate the actual printing operation. The printer goes through the motions of processing the output -- and then goes back to the READY state without printing anything. I've tried using all possible Paper Tray settings and also using the CUPS drivers rather than the Foomatic drivers. None of that makes a difference. What does make a difference is setting the paper size to Letter, but then, of course, the information prints in the wrong place on the page.

View 2 Replies


ADVERTISEMENT

Ubuntu :: Does Anyone Print Envelopes Successfully?

Mar 2, 2011

I have searched the web and the OpenOffice forum for answers to this and have come up empty-handed. I've also searched Ubuntu forums. The posts dealing with envelope printing are old AND essentially unsolved. Doesn't anyone need to print envelopes from Ubuntu? When I was using another OS with another word processor, envelopes were as easy as burping. They took 20 seconds to setup and they printed flawlessly.I hear OO on Windows is decent with envelopes, but I have no experience with that.

I have a Dell Laser 1720, using the Generic PCL 6 driver "ok'd" by Dell with this printer, and the printer works for normal prints. However, with envelopes, OO presents the WYSIWYG as fine, but the print is all messed up, text direction going 180 degrees wrong way, messed up vertically and horizontally. I suspect it has a lot to do with the fact that from OO my paper size choices are more limited than they should be for this printer. It only lists "letter, legal, executive, A4"--no envelopes and no ability to define custom size.What gives? Does anyone have any insight? I'm running OpenOffice 3.2.0 and Ubuntu 10.04 LTS (Lucid). I've spent hours on this and the only pathetic way I've come up with getting one to print...sort of good enough... is by exporting envelope from OO to PDF, then open in PDF software which DOES let me change printer settings, paper size to number 10 envelope. That's not what I call a solution though.

View 9 Replies View Related

Ubuntu :: Get 5250DN Brother Printer To Print Envelopes Correctly

Mar 6, 2010

I have been trying to get 5250DN brother printer to print envelopes correctly and Have tried installing the ppd and a host of other things and still within openoffice on karmic nothing works correctly I have also installed the brother package specifically from the repository via synaptic as well

View 2 Replies View Related

Debian :: Scim Stopped Working In LibreOffice-writer

Sep 8, 2015

I use scim to input Chinese in Libreoffice-writer. It worked on one of my computers until a couple of days ago.

Normally to start scim I press Ctrl and the space bar at the same time. Then I use the input method Cangjie to input Chinese.

Now when I do so in Libreoffice-writer "English/European" appears in the scim panel. The other choice is "English/Keyboard". The choice of either doesn't enable me to input Chinese.

In all other software scim works as before.

The computer runs Debian sid. On another computer that runs Debian sid too I don't have the same problem. I have version 5 of Libreoffice on both computers.

View 1 Replies View Related

Software :: LibreOffice Writer And Calibre And EPUB Format?

Jun 4, 2011

I wrote a document using LibreOffice Writer. It has heading styles and a generated table of contents.I saved the document to ODT and as PDF. I loaded the PDF into Caliber as an e-Book.

I converted the PDF to EPUB format for Nook(tm) devices. I stored the EPUB to my 'droid phone and loaded it into an EPUB reader. VIOLA! I can see the table of contents as page #1. I cannot see any other pages in the EPUB. I can read the original PDF just fine.

Q1. What must I do along the way so that I have a useful EPUB? (I don't need fancy just complete and readable.) Q2. Are their things that I need to do to the PDF in Calibre? Q3. Are there things I need to do in LibreOffice Writer or to the generated PDF before I convert it to EPUB with Calibre?

View 3 Replies View Related

OpenSUSE :: Libreoffice Writer Crashing When Save A File That Contains Multimedia

Jul 31, 2011

Using Opensue 11.4 64 KDE

Have been having some problems with Libreoffice Writer crashing every time I try to save a file that contains any kind of multimedia (usually images) so I decided to completely remove the app and any trace of it and start again.

After complete removal I reinstalled from the Opensuse repo 3.3.1

The porblem I have now is that when I start typing in writer absolutely nothing happens. Wait approximately one minute and the text I typed appears. Try to backspac to delete or type some more and the behaviour persists.

Have I missed installation of some package?

View 3 Replies View Related

Ubuntu :: Libreoffice Writer Or Natty Produce Huge Files

May 3, 2011

I do monthly reports by copying the previous document, update the text and change the images. The images are the same size and numbers each months. Since last month I upgraded my laptop to Natty and suddenly my document went from 942 kB to 10.1 MB in .odt. When saving to PDF the usual size of 472 went up to 1.9 MB. I have searched the net and the forums but haven't seen anything about a similar issue.

I'm not sure if it's an issue that is from the previous document being produced in Open Office and now updated and saved in Libreoffice. Or if it's somehow something to do with the upgrade from Maverick to Natty. I would hope I don't have to uninstall Libreoffice and install Open Office as a solution (which I understand is not entirely easy in Natty, something I read about Open Office being transitional to Libre). I can't email simple documents to customers that's over 10 MB large...

View 1 Replies View Related

Debian :: Hp Laserjet 1020 Doesn't Print

Feb 2, 2010

I have tried to download the latest version of CUPS but do not know how to install it properly using command line commands above 'sudo' and 'sh', and I have tried to install HPLIP but it needs 'cups-devel' installed apparently. My Debian can see the 1020 clearly enough to identify it and give its status as idle, via the CUPS interface. When I try and print a Test page it goes to the spooler, says it is printing OK, but nothing prints. The job then disappears and appears on CUPS as completed. In the old days we would have sent a eof() to make the printer work. Have I got a bug in my HP Laserjet 1020 driver? Or am I missing the great plug-in that is not on the Synaptic Package Manager The SPM says I have HPLIP installed.

View 5 Replies View Related

Hardware :: Hp P1102w Laserjet Does Not Print Through Suse 11.2

Jul 2, 2010

I have a hp p1102w laserjet printer that works in windows. However after connecting it through Suse Linux 11.2 it is recognized and the printer name is showing but there is no driver for the printer. This is a usb connection. I have an 1100a laserjet connected that works but it is a parallel port.

Any suggestions? I haven't been able to find any special drivers on the web.

jim

View 3 Replies View Related

Debian Hardware :: HP Laserjet M1120 MFP Will Scan, But Not Print?

Oct 30, 2010

I'm having trouble getting this printer to print. It'll scan fine, but it won't print. I keep getting the following error:

the printer's state message is: '/usr/lib/cups/filter/foomatic-rip failed'

I have searched and searched and tried numerous things, but I just can't get it to print. (I tried to post the debugging output here, but the forum kept wiping out my post).

View 3 Replies View Related

OpenSUSE Hardware :: Printer - HP LaserJet 1020 - Can't Print At All

Sep 17, 2010

I've been banging my head for two days now trying to get my HP Laserjet 1020 to work. I've gotten the drivers working on the box itself (Opensuse 11.3 x64), but I couldn't get it to print from my laptop (Ubuntu Lucid). Ideally, I'd like to end up with a functional printer which can be used either from the desktop machine (Opensuse) or from the laptop (Ubuntu) through NFS.

After so many attempts at fixing it, I've not made it such that I can't print at all, from either system. I'm considering re-installing Opensuse (or just going back to Kubuntu, which recognizes the printer without a hitch). But before I do so, I figured I'd ask here.

Here are my issues, and attempts at solution:

1) I tried adding the printer both through CUPS, through YAST and through hp-setup, using the hpijs driver. Each time the printer is recognized, but a test page won't print.

2) I tried building the foo2zjs driver, as outlined here: HowTo Install a HP LaserJet 1020 printer in Suse 10.x, 11.x It came up with dependency problems repeatedly on the last step (sudo make install-hotplug) . I gave up when it told me that it was conflicting with an installed package (system-config-printer-udev) which was not installed.

3) Perhaps related problem: on the CUPS web interface, I get a "forbidden" message when I try to change the options on the CUPS server to allow remote access.

Note that:

a) I've already added myself to the lp group.

b) I changed the permissions (+rx) on the /dev/lp0 to allow myself access

c) I'm able to get to the CUPS page on the client machine, so the port 631 (I think) must be open. I say "I think," because there's no option to allow CUPS in YAST firewall settings, for some reason.

I've been following guides here and there, but I'm afraid that I've borked my cupsd.conf file through all the edits. Here it is:

Code:

View 7 Replies View Related

Ubuntu :: Print To LaserJet Shared By Vista Machine?

Nov 9, 2010

My LaserJet is connected to an old desktop machine that has it shared. The configuration on that desktop is correct, since I have been printing through it from other Windows machines for a long time (and it still works now).

I recently started dual-booting Ubuntu 10.10 on my otherwise Windows laptop, and I've gotten everything basically working how I like it, except that I can't get connected to that printer.

The Vista machine is at IP address 192.168.0.103, and the printer is shared as LaserJet. It's set up with workgroup MSHOME.

When I go to add a printer in Ubuntu, I click the Browse button under "SMB Printer," and I see the MSHOME workgroup, but when I try to expand it, there's nothing inside.

If I try to type in the address directly (smb://192.168.0.103/LaserJet), the Verify button tells me "Print Share Inaccessible, Connection timed out." Note that I can ping 192.168.0.103 fine. I can continue through the rest of the wizard, but I obviously can't print anything out after I finish the setup, since the connection is failing for some reason.

There is no username or password required to see the shared printer.

Any idea what could be going on here? I'm kind of at wit's end here, and I'd love to be able to ditch Windows--with the obvious exception of Starcraft II, of course

View 3 Replies View Related

Ubuntu :: HP Laserjet P1005 - File Processing But No Print

Dec 25, 2010

We have workgroup network in the home and the printer "hp laserjet p1005" connected at the server (OS : windows server 2003) and I am connected to the Internet by the server without problems. But when I want to print any file, it remains in (processing) and no print. It's picture for this problem:

View 9 Replies View Related

Hardware :: HP LaserJet 1005 Doesn't Print Anymore

Aug 18, 2010

Unfortunately my usb HP LaserJet 1005 printer stopped working since 16th august. It is running under CUPS 1.3.8, with foo2zjs driver (the only one that supports laserjet 1005). I'm not sure, but this is probably related to the updates I've done recently (I don't exactly remember when I did it, but I think it was before the 16th). Here's what I've done:

Code:
# aptitude update
# aptitude dist-upgrade

As this is a home box, I haven't done that for some months, so a lot of stuff has been updated. I'm afraid some CUPS library has been updated and is now bugged, because it always worked without any problem. My question is whether or not there are known bugs on last CUPS version with hp laserjet and if there's any solution to work it out. I already tried to reinstall the printer, reboot the box, plug it to other USB port, reboot the printer, set it as default printer, and many more things. Google search didn't turn up nothing useful. The problem is not on the printer because I plugged it to my windows pc and it worked like a charm, so I'm pretty sure some stupid configuration or bug is messing arround with my printer

[Code]...

View 3 Replies View Related

Debian :: Openoffice 2.4 - Writer Cannot Print Color

Apr 6, 2010

HP DJ1520
CUPS

print options set to color in both OS printer-options dialogue and CUPS browser dialogue.

printer successfully prints color test page from CUPS browser dialogue.

openoffice Writer print-preview shows document in color.

openoffice Writer printer-dialogue options set to color.

View 2 Replies View Related

Software :: Openoffice 2.4 Writer Cannot Print Color

Apr 6, 2010

HP DJ1520

CUPS

print options set to color in both OS printer-options dialogue and CUPS browser dialogue.

printer successfully prints color test page from CUPS browser dialogue.

openoffice Writer print-preview shows document in color.

openoffice Writer printer-dialogue options set to color.

View 4 Replies View Related

OpenSUSE Hardware :: Cannot Print 11x17 Landscape On HP Laserjet 5100

Mar 5, 2010

I am trying to print a schematic from KPDF (Suse 11.2) onto an 11x17 sheet of paper. Regardless of the printer settings I use or which driver I choose it won't rotate the image and fill the page. I have the same problem with kiCAD. If I use Okular it prints part of the drawing in one corner at the 8.5x11 scale.

View 3 Replies View Related

Debian Multimedia :: Openoffice 2.4 Writer Cannot Print Color

Apr 6, 2010

HP DJ1520
CUPS

print options set to color in both OS printer-options dialogue and CUPS browser dialogue. printer successfully prints color test page from CUPS browser dialogue. openoffice Writer print-preview shows document in color. openoffice Writer printer-dialogue options set to color.

View 1 Replies View Related

Fedora Hardware :: HP Laserjet 1300n - Unable To Write Print Data

Aug 23, 2011

I use a network printer (HP Laserjet 1300n). Since a few days ago I couldn't print anything, the error message is 'Unable to write print data:Broken pipe'. What could be wrong? I replaced the cartridge recently, but nothing else.

View 11 Replies View Related

OpenSUSE Hardware :: Unable To Print To A HP Laserjet P 1007 Network Printer

Jul 9, 2010

I have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:

Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]

I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:

[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...

I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.

View 2 Replies View Related

Debian :: LibreOffice Unable To Print To Pdf

Mar 27, 2011

Installed LibreOffice in Debian Wheezy (KDE)Open a document and type something.

1. Click File -> Export to pdf
A pdf will be generated. No problem

2. Click File -> Print -> Print to File
Only the Postscript option is available, PDF is not available.

Any idea how can I configure so as to get the pdf option when doing a print to file?

View 2 Replies View Related

General :: Printing Addresses On Envelopes?

Nov 18, 2010

I almost never boot windows anymore - but there is one thing I miss

In msword I was able to print addresses on envelopes and/or labels

I have not found that capacity on fedora 13 with Abiword and Open Office writer

Is it there seomwhere?

View 4 Replies View Related

Debian :: Print An OpenOffice Or LibreOffice Calc With An Image And Text, The Image Is Not Printed (the Space Is Blank)

May 11, 2011

I have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.

The problem:
- if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank).
- if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great.
- if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.

[Code]..

View 3 Replies View Related

Ubuntu :: Printing Addresses On Business Envelopes?

Jun 1, 2011

No matter what modifications I make to the printer settings, in order to get both the addressee and the return address on the 4.5x9.5 envelope, I cannot get the information on the face of the envelope.

View 2 Replies View Related

General :: Print Multiple Independent Pages In One Print Job?

Mar 23, 2010

How can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.

I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.

View 1 Replies View Related

General :: How To Configure HP LaserJet P1102w

Aug 5, 2011

Who know how confiure a HP LaserJet P1102w on bebian 6?

View 3 Replies View Related

General :: Cannot Install Printer HP-laserjet 1010 On Red Hat El5

Jun 21, 2011

how to install my hp laserjet 1010 printer on red hat el5.when i connect my printer, a new window pops up detecting a new hardware but my printer's name or the driver is not listed. i have the printer's driver cd which is for windows.

View 7 Replies View Related

General :: HP Laserjet P1007 Is Not Working With BOSS GNU

Dec 4, 2010

My HP Laserjet P1007 is not working with BOSS GNU

View 1 Replies View Related

General :: MSI DVD Writer Not Found / What To Do?

Nov 25, 2010

I have installed Ubuntu 10.4 on Dell Precision 4300 . I have two DVDs .One is player that works okay, but the system does not recognize the other one ,which is MSI DVD writer. Those are both ATA connected on same line . I have tried to switch positions ..but the MSI writer is always hidden.
I can't see MSI on your hardware compatibility list. Is it not useable with Linux ?

View 1 Replies View Related

General :: HP LaserJet M1522nf - Scanned Text Not Smooth

Oct 9, 2010

I have a HP laserjet M1522nf all in one (scan,print,copy) printer attach to my Dell system running ubuntu 10.04. My problem is that each time I scan a document using Xsane Image Scanner, text appear not smooth. I have attach a sample as reference. Below are the link I use to check my driver. [URL].

Output for HP laserjet M1522nf details are as below:
dell@dell-desktop:~$ dpkg -l hplip
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Description
un hplip <none> (no description available)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved