General :: Can't Connect To Internet Using Wireless On Ubuntu 10.10 Despite Having A Connection
Dec 24, 2010
I would like some help setting up using a wireless connection. I can connect using wired connection, and I have no trouble browsing. I have a strong wireless connection as well; however, when I try to browse I get a server not found error. I did download the necessary drivers. Before that, I didn't have a wireless connection. I was able to connect on this pc before the install, and all other devices still connect using wireless. I have a linksys router.
The one thing that stands out at me is the ip address that it says the wireless connection is using. It says it is 10.42.43.1
I feel like that might be problematic because I'm pretty sure my router only accepts connections with values that are between 192.168.1.100 and 192.168.1.200.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
I've been using this network forever With windows and I can't figure out how to connect to it now with ubuntu...I have a build-in wireless card and I know the name/password of the connection, but my computer cannot seem to locate it. I've looked through guides and none of them work..
i just installed the 10.0.4 version. My problem is that I cant connect to the internet. When I add a new wireless connection, it says that its connected but i cant ping the router or connect to any websites. It keeps auto assigning me with a 10.42.43.1 ip which doesn't make any since because my router's is nowhere close to that.
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"
My laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 4.2.2.1result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
I am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
I have an HP laptop with a wireless connection to my BT router. This works fine,but when I switch to ubuntu I cannot get on line it simply does not recognize the the connection.A friend suggested disabling the internal card and using a usb dongle this works fine on windows but again is not recognized by ubuntu.I do have an Ethernet cable connection which is fine in the office but no good when elsewhere in the house. Any one with experience of this problem?
Tried to connect to my wireless connection (COMCAST wireless router) and while my card was detected, I couldn't use it ('Network' didn't look for any wireless connections). Manually set up a connection with SSID etc. didn't work. My card's a 3COM with NIC (or w/e) of 3C59x.
I downloaded the driver in patch form, but could not patch (command not found). Well, no internet, so I was wondering how I might get the metapackage base-devel, which should enable this command? Icidentally, I can't use gcc or anything either, so I'm not sure if I can build anything from source..
I have a dual boot laptop. It has both Ubuntu 10.10 and Windows 7 running on the same machine. Windows can connect to the wireless flawlessly, however, Ubuntu seems to be so fuzzy. The first time, it can connect to the wireless internet in the dormitory. The succeeding days, the network icon just keeps on turning as if it's trying to connect. What's wrong? Is it because of the drivers? If that's the case, then why are there times when I can connect to the wireless internet?
After upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
I have a Dell Inspiron 9300 and I recently installed Fedora 14. The computer has a built in Ethernet card, and I'm not sure about what exactly the card is, but I do know that I have a Wireless USB Netopia IEEE 802.11b (model # SWL-2300U) that worked fine on my XP, but now that I've changed over to Linux I can't seem to find this driver for Linux anywhere!
I am a LINUX newbie using Ubuntu. I love it so far but I am having issues. I cannot connect to the wireless network that I am using with my other Windows PC. The problem in my opinion is that the wireless device I use isn't operating. No light comes on the device. I am not sure how to "find hardware" with Ubuntu.
I have recently installed Ubuntu lucid lynx and at my old house I had a regular cable modem (no wifi) and never used wireless internet. I would simply unplug the ethernet from the windows desktop plug it to my laptop and I was good 2 go.have recently moved and my roommate has a cable modem w/ wifi capabilities. When I plug in I am told that I am connected but......Nothing. dont know if the problem is due to the modem having wireless capabilities when my old one did not or the fact that my roommate has a win7 laptop that is connected via wifi etc. There have been a FEW times that I have walked out plugged in and everything has ran well. when I do plug in I look under connection information and I am told that I am connected at 100Mbps but whenever I try to visit a page I am out of luck. I define newbie (as far as Linux distros) and I have tried everything including going to work w/no sleep because I'm going through massive trial & errors
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
Will the Netgear WPN111 wireless adapter work with Ubuntu 10.10? If so what action is required to get connected with it running Ubuntu 10.10. The adapter works with Windows XP.
My wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
